Blog

Landlords must install lithium battery smoke detectors at the start of a tenancy unless a written agreement states otherwise. They should provide new batteries for smoke alarms. Tenants are responsible for battery replacement, except when the alarm is tamper-resistant and has a 10-year lifespan. Tenants have rights regarding the maintenance and functionality of these smoke … Read more

AT&T offers a battery backup for your gateway and modem, providing up to 8 hours of power. This 7.2Ah SLA battery usually lasts around 5 years. For reliable internet during outages, it’s important to maintain, test, and replace your battery when needed. Proper disposal of old batteries is also recommended. By choosing the right battery … Read more

As a lead-acid battery discharges, it consumes sulfuric acid in the electrochemical reaction. This process causes the pH level of the solution to decrease. At the same time, the battery’s voltage drops because fewer reactants are available. Therefore, both pH and voltage decrease during the discharge process. The change in pH directly impacts the battery’s … Read more

When a lithium-ion battery burns, it releases toxic gases like carbon monoxide and carbon dioxide. If these gases are not ignited, they can create an explosion risk. It is essential to handle lithium-ion batteries with care to avoid fire hazards and health risks from inhaling harmful gases. The heat from the fire can also exacerbate … Read more

A battery is sulfated when its voltage is below 12.4 volts for a 12-volt battery or 24.8 volts for a 24-volt battery. At these levels, the charge percentage is about 75%. Low voltage means the battery may be too sulfated to fully recover. Voltage levels play a crucial role in identifying battery recovery methods. A … Read more

If your battery-operated smart lock, like the Weiser PowerBolt, won’t work, check for low batteries. A blinking red light signals low power. Replace batteries and clean battery contacts. If the problem continues, perform a factory reset. Refer to our troubleshooting guide for further assistance. If the lock still does not operate, inspect the locking mechanism. … Read more

A failing battery usually causes lower voltage readings, not spikes. Symptoms of a bad battery include voltage drops and difficulty holding a charge. Voltage spikes typically signal other electrical problems, not battery failure. Monitor battery health to address issues early and ensure proper electrical performance. To troubleshoot battery issues, start by checking the terminals. Clean … Read more

When a battery encounters a short circuit, its internal resistance limits the current. This creates a potential divider effect between the internal resistance and load resistance. As a result, the terminal voltage decreases, leading to a significant voltage drop. This drop affects the overall performance of the electrical components connected to the battery. The primary … Read more

Internal resistance is how much a battery resists current flow. A “dead” battery usually has internal resistance of 0.029 Ohms or more, while a new 12-volt car battery has about 0.02 Ohms. Higher internal resistance means less capacity for power delivery, leading to energy loss and extra heat, affecting nickel-based systems as they approach end-of-life. … Read more

When a battery discharges, its voltage decreases. This occurs as the battery supplies power to a device. The gradual reduction continues until the voltage is too low to provide sufficient power. Monitoring this decrease is essential for understanding battery life and overall performance. The internal resistance of the battery also plays a role in this … Read more