The Jawbone UP Move uses a CR2032 lithium battery that lasts up to 180 days. When it needs a recharge, it takes about 1.3 hours. This long battery life enhances user convenience by reducing the need for frequent charging while tracking fitness activities effectively.
Once connected, look for a charging indicator on the device. A blinking light typically shows that the battery is charging, while a steady light indicates a full charge. Allow the battery to charge for approximately 80 minutes for optimal results. After charging, disconnect the cable and your device is ready for use.
If the UP Move does not charge, check the cable and connections for damage or debris. Restarting the device may also resolve any temporary faults. If problems persist, consult the user manual or contact customer support for further assistance.
Now that you know how to charge your Jawbone UP Move battery, let’s explore ways to maintain battery life and optimize your device’s performance.
How Can You Charge the Jawbone UP Move Battery Safely?
You can charge the Jawbone UP Move battery safely by using the USB charging cable that comes with the device and following the correct steps to avoid damage.
To ensure safe charging of the Jawbone UP Move battery, consider the following points:
-
Use the provided USB cable: Always use the charging cable that comes with the Jawbone UP Move. This cable is designed to fit the device and provide the appropriate power levels for charging.
-
Connect to a power source: Plug the USB end of the cable into a USB power adapter or a computer USB port. Ensure the power source is compatible and reliable to prevent over-voltage situations.
-
Align the connectors properly: The charging connector must fit snugly into the device’s port. Make sure you align and insert it correctly to avoid any loose connections. Poor connection can lead to inadequate charging.
-
Monitor the charging indicator: While charging, check the LED indicator on the Jawbone UP Move. A steady light typically indicates that the device is charging correctly. A blinking light may suggest a problem with the connection.
-
Charging duration: It usually takes about 1.5 hours to fully charge the battery. Avoid leaving the device connected to power indefinitely after it reaches full charge to preserve battery health.
-
Maintain a safe environment: Charge the device in a dry and cool place. Avoid exposing it to extreme temperatures, moisture, or direct sunlight during charging, as these factors can damage the battery or the electronics.
By following these guidelines, you can charge the Jawbone UP Move battery safely and effectively, ensuring its optimal performance and longevity.
What Charging Tools Are Compatible with the Jawbone UP Move?
The Jawbone UP Move is charged using a compatible USB charging cable specifically designed for the device.
- USB Charging Cable:
- Jawbone UP Move Charging Dock:
- Jawbone USB Wall Adapter:
Considering these compatible charging tools, one can evaluate user preferences for convenience, travel, and connectivity options when choosing how to power the Jawbone UP Move.
-
USB Charging Cable:
The USB charging cable is the primary method for charging the Jawbone UP Move. This cable connects the device to any USB port, such as a computer or a laptop. It is a widely available accessory, often included in the product packaging. Users find this method convenient as it allows for charging with various power sources. -
Jawbone UP Move Charging Dock:
The Jawbone UP Move Charging Dock provides a secure and stable charging option. This dock holds the device in place while it charges from a power outlet. Users appreciate the dock for its ease of use and the added protection it offers to the device during the charging process. -
Jawbone USB Wall Adapter:
The Jawbone USB Wall Adapter enables users to plug the charging cable into a standard wall outlet. This option is favored for its speed, as it often charges the device faster than connecting it to a computer. Users who prefer a more straightforward charging method may opt for this solution due to the convenience of having dedicated wall power.
Overall, having multiple charging options enhances the user experience with the Jawbone UP Move, catering to different preferences and usage scenarios.
How Do You Connect the Jawbone UP Move to Its Charger Properly?
To connect the Jawbone UP Move to its charger properly, follow a series of simple steps ensuring the charging pins align correctly with the device.
-
Locate the charging cable. The Jawbone UP Move charger contains two small metal pins. These pins are necessary for charging the device.
-
Align the UP Move with the charger. Position the Jawbone UP Move on the charger so that the metal pins on the charger come into direct contact with the metal connectors on the bottom of the device. This alignment is crucial for an effective connection.
-
Check the connection. Once positioned, press down gently on the device to ensure it sits securely in place. You should see a visual indicator on the display, such as a blinking light, confirming that it is charging.
-
Monitor the charging process. Keep an eye on the progress of the charge. A fully drained battery typically takes about 80 minutes to charge to full capacity (Jawbone, 2014).
-
Disconnect when fully charged. Once fully charged, the indicator will signal that the charging process is complete. Remove the device from the charger carefully to avoid damage to the connectors.
Following these steps ensures a proper charging process, preserving the device’s battery life and functionality.
How Long Does It Typically Take to Fully Charge the Jawbone UP Move Battery?
The Jawbone UP Move battery typically takes about 80 minutes to fully charge. This quick charging time allows users to rapidly prepare their device for monitoring activities.
The battery capacity of the Jawbone UP Move is relatively small, with a full charge lasting up to seven days under normal usage conditions. Various factors can influence charging time, including the power source’s voltage and the cable used for charging. For instance, using a higher amperage USB port may reduce charging time, while a standard USB port may extend it slightly.
In real-world scenarios, if someone charges the device overnight using a laptop USB port, they will likely wake up to a fully charged battery. Conversely, if they use an older charger with a lower output, it might take longer than the expected 80 minutes.
Additional factors affecting charging include the device’s state of charge when plugged in and any ambient temperatures that could affect battery efficiency. Extreme temperature conditions or extensive usage before charging can lead to slower charging times or reduced battery performance.
In summary, the average charging time for the Jawbone UP Move battery is around 80 minutes, allowing for approximately seven days of usage. Users should consider their power source and charging method, which may influence both charging time and overall battery life. Further exploration could include additional tips for prolonging battery longevity or specific charging accessories that might improve efficiency.
What Steps Can You Take If Your Jawbone UP Move Battery Is Not Charging?
If your Jawbone UP Move battery is not charging, you can try several steps to resolve the issue.
- Check the Charging Cable
- Inspect the Charging Port
- Clean the Charger and Device
- Restart the Jawbone UP Move
- Allow Time for Charging
- Replace the Battery (if applicable)
- Contact Customer Support
To ensure your device functions properly, it is essential to address these potential issues.
-
Check the Charging Cable: Checking the charging cable involves inspecting the cable for any visible damages. Frayed wires or broken connectors can disrupt the charging process. Using a different cable compatible with the Jawbone UP Move can determine if the original cable is the issue.
-
Inspect the Charging Port: Inspecting the charging port means examining the area where the charger connects to the device. Dust or debris can accumulate, blocking the connection. A soft brush or cloth can help clean the port, facilitating a better charge.
-
Clean the Charger and Device: Cleaning the charger and device ensures that all contact points are free of grime. Dirt can hinder the charging process. A gentle wipe with a microfiber cloth can remove accumulated dirt effectively.
-
Restart the Jawbone UP Move: Restarting the Jawbone UP Move can refresh the device’s software. This process is simple: you typically hold down the function button for a few seconds until the device vibrates. This can resolve minor glitches that may prevent charging.
-
Allow Time for Charging: Allowing time for charging is crucial. Sometimes, if the battery is fully depleted, it may take longer to start charging. Leave the device connected to power for at least 30 minutes before attempting to turn it on again.
-
Replace the Battery (if applicable): Replacing the battery is a last resort if other steps fail. Batteries naturally degrade over time and might require replacement. Seek a professional or consult the manufacturer for specific instructions.
-
Contact Customer Support: Contacting customer support can provide professional assistance. If the issue persists despite taking the above steps, it may indicate a deeper problem or defect in the device. Manufacturers typically offer troubleshooting support or warranty options.
By following these steps, you can troubleshoot charging issues with your Jawbone UP Move effectively.
How Can You Maximize the Longevity of Your Jawbone UP Move Battery?
To maximize the longevity of your Jawbone UP Move battery, follow these key strategies: optimize charging habits, limit exposure to extreme temperatures, and minimize notifications and activity tracking.
Optimizing charging habits involves charging your device regularly but not excessively. A study by Tech Electronics (2022) highlighted that lithium-ion batteries, which power devices like the Jawbone UP Move, last longer when kept between 20% and 80% charge.
- Charge your battery when it reaches around 20%. This practice prevents deep discharges, which can shorten battery lifespan.
- Avoid overcharging by unplugging the device once it reaches full charge. Continuous charging after reaching 100% can stress the battery and degrade its performance.
Limiting exposure to extreme temperatures is vital for preserving battery health. According to Apple (2023), lithium-ion batteries can malfunction or degrade in both high and low temperatures.
- Keep your Jawbone UP Move within a temperature range of 32°F to 95°F (0°C to 35°C).
- Avoid leaving the device in hot cars or in direct sunlight for prolonged periods.
Minimizing notifications and activity tracking helps preserve battery life by reducing the frequency of updates and syncing processes. Research conducted by Battery University (2021) indicates that constant notifications can drain battery capacity more quickly.
- Disable unneeded notifications. This reduces the frequency of interactions with the screen and processing demands on the battery.
- Limit activity tracking to essential functions. Turn off features such as constant heart rate monitoring or GPS tracking when they are not required.
By following these strategies, you can effectively extend the life of your Jawbone UP Move battery, ensuring reliable performance over time.
Related Post: