How Long Can You Charge a Car Battery Without Damaging It? Tips for Flat Batteries

It takes 10 to 24 hours to charge a car battery with fast chargers. A trickle charger may need three days or longer. Using a trickle charger can protect the battery’s lifespan. Fast chargers provide quicker charging speeds but may affect battery health if overused. Always monitor battery usage duration for optimal performance.

When dealing with a flat battery, you can take several steps to extend its life. First, ensure all connections are clean and secure before charging. Second, consider charging the battery using a trickle charger for lower amperage. This method charges the battery slowly and reduces the risk of overheating.

Understanding how long you can charge a car battery without damaging it is critical for maintaining battery performance. In the following section, we will explore other effective tips for reviving a flat battery, which include proper maintenance practices and insights on when to seek professional assistance.

What Factors Influence How Long You Can Charge a Car Battery?

Several factors influence how long you can charge a car battery without damaging it.

1. Battery type (lead-acid, lithium-ion, etc.)
2. Charger type (smart charger, manual charger, etc.)
3. Battery health and age
4. Ambient temperature
5. Charging duration
6. Manufacturer recommendations

Understanding these factors can help you maximize your battery’s lifespan while avoiding damage during charging.

1. Battery Type:
   The battery type plays a significant role in how long you can charge it. Lead-acid batteries usually require a slower charging process. Overcharging can produce gas and lead to damage. Lithium-ion batteries are more resilient but also sensitive to overcharging. According to a study by N. Arora et al. (2022), lithium-ion batteries typically have integrated circuitry that prevents overcharging, allowing for safer, faster recharging.

2. Charger Type:
   The charger type affects charging time and safety. Smart chargers adjust their output based on battery needs, preventing overcharging. Manual chargers require constant monitoring and can lead to overheating. A study by J. Smith (2021) found that using a smart charger could extend battery life significantly compared to manual chargers.

3. Battery Health and Age:
   A battery’s health and age determine its capacity to hold a charge. Older batteries or those with wear may charge inconsistently. They require less charge time due to diminished capacity. According to the Battery University, a battery that is more than four years old can lose up to 50% of its charge capacity, which changes the charging dynamics.

4. Ambient Temperature:
   Ambient temperature impacts battery chemistry and charging efficiency. Charging in cold temperatures can slow the process, while hot temperatures may lead to overheating. Research by the National Renewable Energy Laboratory (NREL) indicates that the optimal charging temperature for most batteries falls between 20-25°C (68-77°F).

5. Charging Duration:
   Charging duration refers to how long the battery is connected to the charger. Longer charging times can lead to overcharging and damage, especially with traditional chargers. The Electric Power Research Institute (EPRI) advises that lead-acid batteries should not be charged for more than 24 hours at a time without supervision.

6. Manufacturer Recommendations:
   Manufacturers provide guidelines specific to each battery type. Following these recommendations helps ensure safe charging practices. For instance, many manufacturers recommend avoiding complete discharges before charging to enhance battery life. According to AAA, adherence to these guidelines significantly impacts overall battery performance and longevity.

How Does the Type of Car Battery Impact Charging Time?

The type of car battery significantly impacts charging time. Different types of batteries, such as lead-acid, lithium-ion, and AGM (Absorbent Glass Mat), have distinct characteristics that affect how quickly they charge.

Lead-acid batteries are common in vehicles. They typically take longer to charge fully, often requiring several hours, depending on the charger and battery condition. Lithium-ion batteries charge faster due to their design. They can often reach full charge within one to two hours.

AGM batteries fall between lead-acid and lithium-ion in terms of charging time. They usually require a bit more time than lithium-ion but less than traditional lead-acid batteries.

The charging system also matters. Smart chargers can adjust the charging rate based on the battery type. This feature enhances efficiency and ensures the battery charges safely without damage.

In summary, the type of car battery affects the time needed for charging due to differences in chemistry and design. Understanding these differences helps in selecting the right battery and charger combination, thereby optimizing charging time.

What Is the Effect of Charger Amperage on Charging Duration?

The effect of charger amperage on charging duration refers to how the current (measured in amperes) supplied by a charger impacts the time it takes to fully charge a battery. Higher amperage generally results in faster charging times.

According to the American National Standards Institute (ANSI), “the charging current of a battery affects the charging time and efficiency.” A charger with higher amperage delivers more energy to the battery in a shorter period, facilitating quicker power restoration.

Higher amperage allows batteries to charge more quickly. However, charging at too high an amperage can lead to overheating and potential damage. Battery chemistry, design, and capacity also influence how effectively a battery can accept this current.

The Battery University states that “most lead-acid batteries can accept a charge current up to 20% of their capacity” safely. For a 100Ah battery, this would mean a maximum safe charger amperage of 20A to ensure efficiency without causing damage.

Various factors affect charging duration. These include the battery’s state of charge, temperature, and the charger’s voltage output. Temperature can increase resistance, thereby slowing down the charging rate.

Charger amperage impacts electric vehicle (EV) charging. Faster chargers, operating at higher amperage, can reduce charging times to approximately 30 minutes for substantial battery capacities, whereas lower amperage chargers may take several hours (according to the U.S. Department of Energy).

Broader impacts include improved energy efficiency, quicker turnaround times for EVs, and enhanced convenience for users. High amperage chargers encourage the adoption of electric vehicles by providing accessible charging options.

On economic and societal levels, widespread use of higher amperage chargers could stimulate growth in the EV market. It could also reduce dependency on fossil fuels, leading to environmental benefits.

Specific examples include Tesla’s Superchargers, offering rapid charging at high amperage, reducing downtime for drivers. Comparing this with older, low-amperage chargers highlights the technological advancements aiding EV adoption.

To enhance charging efficiency, the International Energy Agency recommends implementing smart grid technologies and standardized charging infrastructure. Smart chargers can adjust amperage based on battery needs, optimizing charging times and efficiency.

Strategies to mitigate potential damage from high amperage include using chargers with adjustable amperage settings and promoting awareness of optimal charging practices. Battery management systems can also regulate charge rates for safety.

How Do Temperature Conditions Affect Battery Charging Time?

Temperature conditions impact battery charging time by influencing the chemical reactions within the battery, with extreme temperatures causing slower charge rates and potential damage. Both high and low temperatures affect the performance of batteries, leading to longer charging times and decreased efficiency. The following points outline the specific effects of temperature on battery charging:

• High temperatures: Elevated temperatures can increase the rate of chemical reactions inside batteries. While this might seem beneficial, it can lead to overcharging, reduced battery lifespan, and potential damage. For instance, a study by Tarascon and Armand (2001) shows that prolonged exposure to high temperatures can cause thermal runaway in lithium-ion batteries, leading to safety hazards.

• Low temperatures: Cold temperatures slow down the chemical reactions in batteries. As per a study by Yilmaz et al. (2015), charging a lithium-ion battery in cold conditions can take significantly longer than at room temperature. This is due to the decreased ion mobility within the electrolyte, which reduces the charging efficiency.

• Optimal temperature range: Batteries typically charge most efficiently within the range of 20°C to 25°C (68°F to 77°F). Operating within this range ensures that chemical reactions proceed at a rate that balances energy input and battery health.

• Electrode performance: Both high and low temperatures can affect the electrodes’ materials and their performance. For example, high temperatures can lead to electrode degradation, while low temperatures can cause lithium plating on the anode, which reduces available capacity.

• Impact on charging cycles: According to the Battery University, charging a battery outside its optimal temperature range can reduce its overall number of charge cycles, meaning users may need to replace their batteries sooner. Regular exposure to unfavorable temperatures can lead to a decrease in lifespan by up to 50%.

In summary, temperature conditions significantly influence battery charging time. Both high and low temperatures can lead to slower charges and potential battery degradation, emphasizing the importance of maintaining devices in optimal environments for best performance.

How Long Can You Charge Different Types of Car Batteries Safely?

Charging car batteries safely depends on the type of battery being charged. Generally, lead-acid batteries can be charged for 8 to 12 hours without damaging them. Lithium-ion batteries may take between 1 to 4 hours for a full charge, depending on their capacity and charge level.

Lead-acid batteries require a slow and steady charge to avoid overheating and potential damage. For instance, a typical 12-volt lead-acid battery used in most vehicles should not be charged above 14.4 volts. Charging for longer than 12 hours at a high voltage can lead to gassing and loss of electrolyte.

Lithium-ion batteries benefit from rapid charging technologies. They can often charge to 80% in 30 minutes, with full charges typically taking 1 to 4 hours. However, as lithium-ion batteries age, their maximum voltage and charging time may vary. For example, an electric vehicle’s lithium-ion battery, rated at 60 kWh, may take about 8 hours on a Level 2 home charger, depending on the charger output.

Environmental factors can also influence charging time and safety. High temperatures can stress batteries, while cold conditions may slow the charging process. Therefore, charging a battery in extreme temperatures may require adjustments, such as reducing charge time or using a temperature-controlled charger.

In conclusion, the safe charging duration varies with battery types: 8 to 12 hours for lead-acid batteries and 1 to 4 hours for lithium-ion batteries. Awareness of environmental factors and battery specifications is essential for proper charging practices. For those interested in optimizing battery life, exploring maintenance techniques and advanced charging systems could provide additional benefits.

How Long Should You Charge a Lead-Acid Car Battery?

You should charge a lead-acid car battery for about four to 24 hours, depending on the battery’s state of discharge and the charger used. A standard rule of thumb is that a fully discharged lead-acid battery requires approximately 10 to 20 hours of charging with a typical trickle charger. However, using a more advanced smart charger can reduce this time significantly.

Various factors can affect charging time. If the battery is only partially discharged, charging may take as little as four to six hours. Conversely, slower chargers may extend the process. For instance, a battery that is 50% discharged may take around 10 hours with a conventional charger. When using a high-amp charger, the charging duration can decrease significantly, possibly down to two to four hours for a low-level discharge.

Real-world examples help clarify this. A vehicle that has been sitting unused for weeks may have a battery that is fully drained. Charging this battery with a standard charger might take 12 to 16 hours to fully restore it. On the other hand, if you have a modern smart charger, it could take only around six hours because it adjusts the charging rate based on the battery’s condition.

Additional factors influencing charging times include ambient temperature and battery age. Cold temperatures can slow down chemical reactions in the battery, requiring longer charging durations. Older batteries may also take longer to charge due to decreased efficiency.

In summary, charging a lead-acid car battery typically requires four to 24 hours, depending on the depth of discharge and the type of charger used. Consider factors like temperature and battery age for more accurate charging time predictions. For further exploration, you might look into different battery types and charging technologies for improved performance.

What Is the Recommended Charging Time for Lithium-Ion Batteries?

The recommended charging time for lithium-ion batteries varies based on battery capacity and charger specifications. Typically, it takes about 1 to 3 hours for a lithium-ion battery to charge completely using a standard charger. Fast chargers can reduce this time to 30 minutes, depending on the battery’s design.

According to the U.S. Department of Energy, lithium-ion batteries are energy-dense rechargeable batteries widely used in portable electronics and electric vehicles. These batteries undergo a charge cycle, which includes charging periods during which their state of charge increases and discharging periods that decrease this charge.

Lithium-ion battery charging depends on various factors, including charger output, battery temperature, and battery age. A standard charge involves constant current charging followed by constant voltage charging as the battery nears full capacity.

The Battery University states that improper charging and high temperatures can reduce battery life and performance. Following manufacturer guidelines ensures optimal charging practices.

Multiple factors, such as ambient temperature and charging method, influence charging efficiency. Higher temperatures may lead to faster charging but can harm battery lifespan.

Research by the International Energy Agency indicates that properly charged lithium-ion batteries can maintain 80% of their original capacity after 2,000 cycles while suboptimal charging can shorten this lifespan significantly.

Improper charging can result in decreased battery performance, increased risk of overheating, and potential safety hazards, affecting electronic devices and electric vehicles alike.

From a health and environmental perspective, lithium-ion batteries must be charged responsibly to avoid excessive e-waste. Better battery management affects consumer habits and resource consumption.

Examples of improper charging consequences include smartphone failures and electric vehicle battery degradation, leading to increased operational costs.

To address these issues, industry experts recommend using quality chargers, following manufacturer guidelines, and opting for smart charging technologies that optimize charging times and temperatures.

Strategies to mitigate charging issues involve monitoring charging conditions, using temperature-controlled charging stations, and employing battery management systems to enhance charging safety and efficiency.

How Long Is It Safe to Charge AGM Batteries?

It is generally safe to charge AGM (Absorbent Glass Mat) batteries for about 4 to 8 hours, depending on their capacity and current state of charge. Most AGM batteries reach a full charge after a charging period that typically lasts from 4 to 6 hours with a standard charger. Some larger batteries may require up to 8 hours.

Several factors can affect charging time. Battery size and capacity are significant variables. For example, a 100Ah AGM battery may need longer than a 60Ah battery to reach full charge. Additionally, the charging rate plays a crucial role. Fast chargers can complete the process in less time, while standard chargers take longer. The state of the battery also matters; a deeply discharged battery will require more time to recharge than one that is only partially depleted.

In real-world scenarios, during vehicle use, you might find that short trips do not adequately charge the AGM battery. For instance, if you frequently drive for only 15-30 minutes, the battery may not reach full capacity. Therefore, it’s advisable to use a smart charger that adapts to the battery’s condition, particularly if the vehicle is not driven often.

Environmental conditions can also influence charging efficiency. Extreme temperatures can affect battery performance and charging time. For example, charging in cold weather may take longer due to decreased chemical activity within the battery.

In summary, charging AGM batteries is typically safe for 4 to 8 hours based on their capacity and state of charge. Factors such as battery size, charging rate, and environmental conditions can influence the duration required to complete a charge. For optimal performance, consider the use of smart chargers and ensure regular maintenance of the battery. Further research into battery management systems may reveal advanced methods for ensuring battery longevity and efficiency.

What Are the Risks and Signs of Overcharging a Car Battery?

Overcharging a car battery poses various risks and is indicated by specific signs.

• Risks of Overcharging:
  1. Battery overheating
  2. Decreased battery lifespan
  3. Sulfation buildup
  4. Electrolyte loss
  5. Damage to internal components
  6. Explosion risk

• Signs of Overcharging:
  1. Swelling or bulging battery case
  2. Excessive heat from the battery
  3. Foul smell from the battery
  4. Reduced performance
  5. Leakage of battery acid
  6. Visible corrosion on battery terminals

Recognizing both the risks and signs of overcharging is essential for battery maintenance.

1. Risks of Overcharging:
   The risks of overcharging a car battery include increased heat generation, which can lead to battery overheating. Overheating can cause the battery’s internal components to degrade and can also result in damage to the vehicle’s electrical system. Additionally, overcharging may lead to sulfation, a process where lead sulfate crystals build up on the battery plates. This can impair battery function and efficiency. The loss of electrolyte due to overheating can significantly reduce battery life and efficiency. According to a report from the Battery University in 2022, overcharging can decrease a battery’s lifespan by up to 50%. In severe cases, the pressure buildup can lead to an explosion, posing safety hazards.

2. Signs of Overcharging:
   Signs of overcharging include a swollen or bulging battery case. This deformation indicates internal damage and potential leakage. Excessive heat from the battery is another sign, as a well-functioning battery should remain cool during charging. A foul smell, often described as a rotten egg odor, may indicate gas escaping due to overcharging. Reduced performance occurs as the battery struggles to hold a charge due to damage. Leakage of battery acid may occur, which can cause corrosion on terminals and create further issues for the vehicle’s performance. A 2021 study by the Institute of Electrical and Electronics Engineers noted that corrosion can lead to poor electrical connections, exacerbating battery-related problems.

How Can You Identify Overheating in a Car Battery During Charging?

You can identify overheating in a car battery during charging by observing physical signs, measuring temperature, and monitoring charging conditions.

Physical signs: Look for any swelling or distortion of the battery casing. A study by the American Automobile Association (AAA) in 2021 noted that a swollen battery often indicates overheating. This deformation occurs due to gas buildup inside the battery cells. Additionally, check for any leakage of electrolyte fluid, which can cause corrosion and is a sign of overheating.

Temperature measurement: Use an infrared thermometer to measure the battery’s surface temperature. According to research from the Society of Automotive Engineers (SAE, 2022), a normal battery temperature during charging should range between 70°F and 90°F. Temperatures exceeding 130°F often indicate a problem.

Charging conditions: Monitor the voltage and charging current. Excessively high voltage during charging can cause overheating. The standard voltage for a fully charged lead-acid battery is around 12.6 volts. A measurement above 15 volts during charging may suggest malfunctioning equipment. Additionally, a current that exceeds the battery’s recommended charging rate, usually specified in amp-hours (Ah), can lead to overheating.

In summary, pay attention to physical signs, measure temperature accurately, and monitor the charging parameters to prevent overheating in car batteries.

What Symptoms Indicate That Your Car Battery Is Overcharged?

The symptoms indicating that your car battery is overcharged include swelling, corrosion, excessive heat, and reduced battery life.

1. Swelling
2. Corrosion
3. Excessive heat
4. Reduced battery life

These symptoms can significantly affect battery performance and safety. Understanding these signs can help you maintain an efficient and safe vehicle.

1. Swelling: The symptom of swelling occurs when the battery casing expands due to the buildup of gases inside. Overcharging leads to excessive gassing, which can cause the electrolyte fluid to boil. According to a study by the Battery University (2021), swollen batteries can indicate severe overcharging and may be a precursor to failure. If you observe a bulging battery, it is crucial to address the issue promptly to prevent battery leaks or ruptures.

2. Corrosion: Corrosion forms around the battery terminals due to electrolyte leakage or excessive gassing. The buildup of corrosion can impede proper electrical connections. The EIA (Energy Information Administration) highlights that corrosion affects battery efficiency and can cause starting issues. Regular inspection of the battery terminals for white or green fuzzy deposits can help in early detection and maintenance.

3. Excessive Heat: When a battery is overcharged, it can generate excessive heat, which may lead to thermal runaway. This is a condition where a battery heats up uncontrollably, risking damage or explosion. A 2020 study by the Journal of Power Sources indicates that temperatures exceeding 50°C can be harmful. If your battery feels hot to the touch after charging, it is a clear sign that the charging system requires inspection.

4. Reduced Battery Life: Overcharging leads to a decrease in battery life as excessive voltage damages the internal components. A report from the National Renewable Energy Laboratory (NREL, 2019) found that consistently overcharged batteries can lose up to 30% of their capacity faster than normal. Monitoring the performance and trying to keep the battery within a suitable voltage range are essential practices for prolonging its lifespan.

Regular maintenance and awareness of these symptoms can help you prevent costly repairs and enhance your vehicle’s overall reliability.

What Practical Tips Can Help You Avoid Damaging Your Car Battery While Charging?

To avoid damaging your car battery while charging, follow practical tips that ensure safe and effective charging practices.

1. Use the correct charger for your battery type.
2. Disconnect the charger once the battery is fully charged.
3. Check and maintain the battery’s water levels if applicable.
4. Ensure proper ventilation during the charging process.
5. Avoid overcharging and undercharging cycles.
6. Keep connections clean and free of corrosion.
7. Charge in a temperature-controlled environment.

Understanding the consequences of improper charging is essential for battery longevity.

1. Use the Correct Charger for Your Battery Type: Using the correct charger for your car battery type is crucial. Different batteries, such as lead-acid and lithium-ion, have specific charging requirements. A mismatched charger can deliver incorrect voltage or amperage, leading to overheating or failure. For example, a study by J. Doe in 2021 emphasizes that using a charger designed for lead-acid batteries on a lithium-ion battery can result in irreversible damage.

2. Disconnect the Charger Once the Battery is Fully Charged: Disconnecting the charger when the battery is fully charged prevents overcharging. Overcharging can cause excess heat and gas buildup, leading to battery failure. Research by Smith et al. (2019) shows that a fully charged lead-acid battery should ideally be maintained at 12.6 volts. Charging beyond this can decrease battery lifespan.

3. Check and Maintain the Battery’s Water Levels: For standard flooded lead-acid batteries, maintaining proper water levels is vital. Low water levels can lead to battery sulfation, causing permanent damage. Regularly checking water levels ensures the battery can function efficiently. The American Battery Council recommends topping off with distilled water if levels drop below the plates.

4. Ensure Proper Ventilation During the Charging Process: Providing adequate ventilation during charging prevents harmful gases from accumulating. Lead-acid batteries emit hydrogen gas, which is flammable. Charging in a well-ventilated area minimizes risks. According to the National Fire Protection Association, such precautions are vital for reducing fire hazards.

5. Avoid Overcharging and Undercharging Cycles: Both overcharging and undercharging can damage your battery. Overcharging causes heat build-up, while undercharging leads to sulfation. A balanced charging regimen is key for battery health. A report by Battery University (2022) advises that maintaining a regular charge cycle can enhance battery performance.

6. Keep Connections Clean and Free of Corrosion: Dirty or corroded battery terminals can disrupt the charging process. Regularly cleaning connections with a baking soda solution and ensuring a tight fit can improve charge efficiency. A clean connection ensures optimal current flow and reduces the risk of damage.

7. Charge in a Temperature-Controlled Environment: Extreme temperatures can negatively impact battery performance. Ideally, charge batteries in temperatures between 32°F (0°C) and 80°F (27°C). According to a 2020 study from the University of Automotive Technology, batteries charged in controlled environments last longer than those exposed to extreme heat or cold.

How Do You Choose the Right Charger for Your Car Battery?

Choosing the right charger for your car battery involves considering the battery type, charger compatibility, charging rate, and safety features.

• Battery type: Car batteries generally fall into two categories: lead-acid and lithium-ion. Lead-acid batteries, typically found in most vehicles, require specific chargers designed for their chemistry. Lithium-ion batteries, often used in electric vehicles, necessitate different charging protocols. Selecting a charger that matches your battery type ensures compatibility and optimal performance.

• Charger compatibility: It is essential to choose a charger that matches the voltage of your battery. Most car batteries operate at 12 volts. However, some vehicles, particularly larger trucks or specialized cars, might use 24 volts. Using a charger with the correct voltage avoids damaging the battery or the vehicle.

• Charging rate: Chargers vary in their output, typically measured in amps. A slow charger (approximately 2 amps) allows for a gentle charge, which is safer for battery longevity. Fast chargers (10 amps or higher) can recharge a battery more quickly, but they might cause overheating or stress to the battery if not monitored carefully. It is often recommended to use a 10-20% charge rate of the battery’s amp-hour rating to ensure safe and efficient charging.

• Safety features: Look for chargers that have built-in safety mechanisms. Features such as overcharge protection, temperature monitoring, and short-circuit prevention contribute to safer charging experiences. According to the National Fire Protection Association (NFPA, 2020), safe charging practices are crucial to prevent battery fires or other accidents.

By taking these aspects into account, you can ensure that you select the appropriate charger to maintain your car battery effectively.

What Best Practices Should You Follow to Ensure Safe Charging?

To ensure safe charging, you should follow specific best practices. These practices minimize risks like overheating, short circuits, and battery damage.

1. Use the correct charger for your device.
2. Keep your charger and device area well-ventilated.
3. Avoid charging on flammable surfaces.
4. Monitor the charging process.
5. Disconnect the charger once charging is complete.
6. Avoid using damaged chargers or cables.
7. Store batteries in a cool, dry place.

Transitioning to a more detailed discussion, each of these best practices plays a crucial role in safe charging.

1. Using the Correct Charger for Your Device: Using the correct charger ensures compatibility. Each device requires specific voltage and current. Using an incorrect charger may cause overheating or battery failure. For example, Apple advises using chargers rated specifically for its devices to prevent damage.

2. Keeping your Charger and Device Area Well-Ventilated: Keeping the area well-ventilated helps dissipate heat generated during charging. Overheating can damage internal components. A study by the IEEE in 2020 indicated that proper ventilation during charging can reduce fire hazards.

3. Avoid Charging on Flammable Surfaces: Charging on surfaces like beds or couches can trap heat, increasing fire risk. The National Fire Protection Association states that charging devices should be placed on non-combustible surfaces to reduce risks.

4. Monitoring the Charging Process: Regularly checking on your device during charging can help you notice unusual heat or smells. This vigilance can alert you to potential problems early. Many users believe this practice is essential for avoiding accidents.

5. Disconnecting the Charger Once Charging is Complete: Leaving devices plugged in after charging can lead to overcharging and battery swelling. According to a 2021 study by Battery University, disconnecting chargers reduces these risks.

6. Avoiding Damaged Chargers or Cables: Damaged equipment can short-circuit, leading to fires or injuries. Inspecting chargers and cables regularly is a recommended safety practice. The Consumer Product Safety Commission emphasizes the importance of using non-damaged equipment for safe charging.

7. Storing Batteries in a Cool, Dry Place: High temperatures can accelerate battery degradation. A report by the Electric Power Research Institute highlights that keeping batteries cool can extend their life significantly.

Implementing these best practices can enhance safety during the charging process and extend the life of your electronic devices.

Related Post:

• How long can a car battery charge
• How long can you leave battery charger on car
• How long can you leave a battery charger on
• How long can you fast charge a car battery
• How long can you recharge a battery