The iPad 6th generation charges at a maximum power of 12W. It typically takes about 3 hours to reach a full charge. For the best results, use an Apple-certified charger. This usage improves charging speed and helps extend the battery’s lifespan.
Understanding the iPad 6th Gen Battery Charge is crucial for maximizing device performance. Monitoring charging habits can enhance battery longevity. Regular charging cycles help avoid deep discharging, which can damage the battery over time. Moreover, keeping the device updated can optimize battery health as software improvements may include power-saving features.
As we delve deeper, it is essential to explore best practices for maintaining battery health and tips for prolonging battery life. This information will empower users to extend the usability of their iPad and ensure a reliable experience.
How Long Does It Take to Fully Charge an iPad 6th Gen Battery?
It takes approximately 4 to 5 hours to fully charge an iPad 6th Generation battery. The device uses a typical charging scenario with the included 10W USB power adapter. When charging from zero to 100%, most users can expect this timeframe.
Charging speed can vary based on several factors. The iPad 6th Gen has a battery capacity of about 8,827 mAh. Charging time may increase if low-quality or non-original chargers are used. In contrast, using a higher wattage adapter, such as a 12W or 20W charger, can reduce charging time, potentially achieving a full charge in around 3 to 4 hours.
For example, if a user starts charging their iPad at 10 PM while preparing for bed, they may unplug it at 3 AM if using a 10W charger. However, using a 20W charger could allow them to unplug by midnight, freeing them for other activities.
Additionally, factors like ambient temperature can affect charging efficiency. Charging in very hot or cold environments may slow down the process or lead to limitations on charging speeds. It’s also worth noting that if the device is in use while charging, it may take longer to reach a full charge compared to when it is turned off or in sleep mode.
In summary, the typical charging time for an iPad 6th Gen battery ranges from 4 to 5 hours when using the standard charger. Factors like charger wattage and environmental conditions can influence this timeline. Users may consider examining their charging habits and equipment for optimal charging performance.
What Is the Standard Charging Time for an iPad 6th Gen?
The standard charging time for an iPad 6th Gen is approximately 4 to 6 hours when using a 12W USB power adapter. This timeframe can vary based on the device’s battery level and whether it is in use during charging.
According to Apple, a reputable organization in technology, the iPad 6th Gen is designed to utilize a specific charging protocol for optimal battery performance. This enhances charging efficiency and longevity.
Charging time can depend on several factors. These include the wattage of the charger, the current battery level, and usage during charging. For instance, using a higher wattage charger can reduce charging time. Conversely, heavy usage while charging can prolong the process.
Additional definitions note that charging time may be less with fast charging technology. For example, USB-C Power Delivery can allow for quicker charge times, which certain models may support.
Several factors can influence charging time. These include ambient temperature, the condition of the charging cable, and battery health. A damaged cable may slow down charging, while extreme temperatures can affect performance.
Apple states that iPads typically have a battery life of around 10 hours of web browsing. This efficiency aligns with the standard industry statistics for tablet devices.
The implications of charging efficiency are significant. Quick charging can enhance user experience and device accessibility. Conversely, lengthy charging times may lead to user frustration and downtime.
Social and economic impacts include lost productivity in professional settings during device charging. Efficient charging impacts productivity, especially in educational and corporate environments.
Examples include students requiring their devices fully charged for classes or employees needing charged devices for meetings. Prolonged downtime affects their performance.
To optimize charging, users should consider using quality chargers and cables. Apple recommends regular battery checks and updates to ensure optimal performance.
Strategies for improving charging efficiency include investing in fast chargers and maintaining battery health through regular management. These practices can mitigate charging issues significantly.
How Does the Charger Type Affect the Charging Time of an iPad 6th Gen?
The charger type significantly affects the charging time of an iPad 6th Gen. Different charger types deliver varying power levels, which influences how quickly the iPad charges.
Using a standard 5W charger will result in longer charging times. This charger delivers low power, charging the iPad slowly. In contrast, a 10W or 12W charger provides more power, allowing for faster charging.
The iPad 6th Gen is compatible with higher-power chargers, such as the 20W USB-C charger. Using this type of charger can drastically reduce charging time. The iPad can charge more than twice as fast with a 20W charger compared to a 5W charger.
In summary, the charger type directly affects how much power is delivered to the device. Higher wattage chargers reduce charging time. Therefore, for the iPad 6th Gen, using a more powerful charger leads to faster charging.
What Can You Do to Speed Up Charging for an iPad 6th Gen?
To speed up charging for an iPad 6th Gen, you can use a higher wattage charger, turn off the device while charging, and minimize background applications.
- Use a higher wattage charger
- Turn off the device while charging
- Minimize background applications
- Keep the charging port clean
- Utilize Airplane Mode
- Use a certified cable
- Charge on a cool surface
Implementing these strategies can significantly enhance charging efficiency, but it is important to understand how each method contributes to a faster charge.
-
Using a Higher Wattage Charger: Using a higher wattage charger enables faster charging. The 6th Gen iPad supports 10-12 watt chargers, but using a 20 watt USB-C charger will expedite the charge time. Apple’s recommendations suggest that higher wattage reduces overall charging duration, allowing users to regain battery life more quickly. For instance, a 20 watt charger can charge your iPad up to 50% in about 30 minutes.
-
Turning Off the Device While Charging: Turning off the device can increase charging speed. When the iPad runs, it uses power for processes and applications. By switching it off, the device consumes minimal power, allowing more current to flow into the battery. This process may not be suitable for everyone, but it’s effective when users need a quick charge before using the device again.
-
Minimizing Background Applications: Minimizing active applications while charging helps preserve battery life. Running applications like games, streaming media, or GPS consumes battery power rapidly. Closing these apps while charging allows more energy to be directed toward the battery rather than maintaining app performance. This simple act can prevent battery drain during the charging process.
-
Keeping the Charging Port Clean: A clean charging port ensures optimal charging efficiency. Dust and debris can prevent proper contact between the charging cable and the iPad. Regularly inspecting and cleaning the port can enhance the charging speed. A blocked port can hinder the flow of electricity, leading to sluggish charging.
-
Utilizing Airplane Mode: Activating Airplane Mode reduces the power consumption of the device. While in this mode, all wireless communications stop, allowing the iPad to charge more quickly. This can be especially helpful when users need a rapid charge to complete an important task.
-
Using a Certified Cable: Using a certified charging cable ensures optimal performance and safety. Apple-certified cables are designed to deliver the appropriate current and voltage needed for the device. Non-certified cables can cause inefficient charging or even damage the device.
-
Charging on a Cool Surface: Charging the iPad on a cool, flat surface helps maintain proper temperature. Excessive heat can affect battery performance and charging rate. Keeping the iPad in a well-ventilated area can prevent overheating and improve charging efficiency.
By employing these strategies, users can enhance their charging experience and reduce downtime on their iPad 6th Gen.
How Fast Does the iPad 6th Gen Battery Charge?
The iPad 6th Gen battery charges at a rate of approximately 2 to 2.5 hours for a full charge. This speed depends on several factors, including the power source and usage during charging. Using the standard 10W charger, the iPad typically reaches about 50% charge in around 1.5 hours. If you use a more powerful charger, such as a 12W or 20W unit, the charging time may improve slightly. It is important to note that background activities and screen usage can slow down the charging process. Overall, for optimal charging, it is best to use a compatible charger and minimize device usage while charging.
What Charging Speeds Can You Expect from the iPad 6th Gen?
The iPad 6th Gen typically supports charging speeds of up to 12W when using the included 10W power adapter.
- Key Charging Speed Details:
– Maximum charging speed: 12W
– Standard power adapter: 10W
– Alternative charger: 12W USB adapter
– Charging time: Approximately 5-6 hours for a full charge
– Fast charging capability: Not available
– Battery capacity: 8,827 mAh
While the iPad 6th Gen provides reliable charging speeds, users might have differing opinions on its efficiency compared to newer models or other tablets.
- Maximum Charging Speed:
The maximum charging speed of the iPad 6th Gen reaches 12W. Charging speed determines how quickly the device’s battery can replenish its energy. The base 10W power adapter that comes with the device supports this speed.
According to Apple, the iPad charging specifications indicate that a higher wattage adapter does not increase charging speed beyond the 12W limit. Thus, using a powerful charger often does not yield faster charging times.
- Standard Power Adapter:
The standard power adapter for the iPad 6th Gen is a 10W adapter. Users receive this adapter upon purchase. It supplies sufficient power for regular use and maintains optimal charging times.
Using a higher wattage adapter, such as the 12W USB adapter, can be beneficial for quicker charging but does not exceed the 12W efficiency limit. Consumer feedback suggests that while the 10W adapter is adequate, some users prefer higher-capacity chargers for other devices.
- Charging Time:
Charging time for the iPad 6th Gen is typically around 5-6 hours for a complete charge. This duration depends on factors like usage during charging and charger efficiency.
For example, running intensive applications while charging can extend the time needed to reach a full battery. Furthermore, charging the device while turned off generally takes less time compared to using it concurrently.
- Fast Charging Capability:
The iPad 6th Gen lacks fast charging capabilities available in newer models. Fast charging allows devices to reach significant levels of charge within shorter time frames.
This absence is a common critique among users, especially when comparing the iPad 6th Gen with newer models that support USB-C charging. Many believe that the inclusion of fast charging would have improved the user experience.
- Battery Capacity:
The battery capacity of the iPad 6th Gen is 8,827 mAh. This capacity indicates how much energy the battery can store. A larger capacity typically enhances usage time between charges.
Users often compare the battery life with expectations based on usage patterns. Many report satisfactory performance, particularly for casual users who engage in web browsing or reading.
In conclusion, the iPad 6th Gen offers reliable charging speeds with a solid performance profile; however, it may not meet the needs of users demanding quicker charge times or modern charging features.
How Does Fast Charging Work for the iPad 6th Gen?
Fast charging for the iPad 6th Gen works by increasing the flow of electrical current to the device’s battery. The iPad 6th Gen supports fast charging using a higher wattage charger, such as the 12W or 20W USB-C power adapter, instead of the standard 5W charger.
When you connect the iPad to a compatible charger, it communicates with the battery management system. This system regulates the charging speed based on the battery’s state and temperature. Initially, the charger sends a larger amount of power to the battery, allowing it to fill quickly.
As the battery approaches full capacity, the system gradually reduces the charging speed to prevent overheating and extend battery lifespan. This process ensures the iPad charges efficiently and safely. Using fast charging can significantly reduce charging times, allowing for more usage with less downtime.
What Is the Impact of Using Different Charger Wattages?
Using different charger wattages can significantly impact charging speed, battery health, and device performance. Charger wattage refers to the power output of a charger, expressed in watts (W), which influences how quickly a device charges.
According to the U.S. Department of Energy, a higher wattage charger can deliver more power to a device, which can lead to faster charging times. They note that compatibility with the device’s specifications is crucial for safe charging.
Higher wattage chargers can charge devices faster but may affect battery longevity. Fast charging may generate more heat, which can shorten battery life over time. Conversely, lower wattage chargers charge devices slowly but may enhance battery lifespan due to reduced heat generation.
The Battery University explains that lithium-ion batteries, commonly used in devices, degrade faster when exposed to heat. Lower temperatures during charging can improve battery lifespan, highlighting the importance of using chargers that align with device specifications.
Charging devices at lower wattages can lead to longer charging times, often frustrating users. Fast chargers may cause safety risks if used with incompatible devices. Additionally, various devices have different energy demands requiring matching wattage.
As of 2021, approximately 40% of smartphone owners use chargers not designed for their devices, according to a study by the International Energy Agency. This mismatch can lead to increased waste and safety concerns.
Using incompatible watts can impact battery health, charging efficiency, and even create hazardous scenarios, such as overheating or damage to the device.
To mitigate potential issues, experts recommend using the manufacturer’s recommended charger wattage. The International Electrotechnical Commission emphasizes the importance of adherence to specifications to ensure safe charging.
Recovery strategies include educating users on device compatibility, developing smart chargers that adjust wattage, and implementing better labeling practices on chargers.
Overall, proper charger wattage usage can enhance device safety, prolong battery life, and improve the consumer experience. Sustainable practices in charging technologies can lead to healthier devices and reduced electronic waste.
What Is the Battery Life of the iPad 6th Gen?
The battery life of the iPad 6th Generation refers to the duration the device operates on a single charge. Apple claims that this model offers up to 10 hours of battery life while using applications such as surfing the web on Wi-Fi, watching videos, or listening to music.
According to Apple Inc., the 6th Generation iPad has been engineered to provide consistent performance, enabling users to leverage its features without frequent interruptions for charging. This information is available on Apple’s official website and product documentation.
The battery life plays a crucial role in user experience. Factors affecting battery life include display brightness, background app activity, and the type of usage. Intensive tasks like gaming may drain battery faster than casual web browsing or video streaming.
The U.S. Department of Energy defines battery life based on discharge cycles and efficiency ratings. Efficient energy management contributes to longer usage times, while higher demand for processing power can lead to reduced overall battery longevity.
Different conditions impacting battery life include temperature, software updates, and accessory usage. Extreme temperatures can shorten battery performance, while outdated software may not optimize efficiency.
Statistically, Apple states that the iPad’s battery can retain up to 80% of its original capacity after 1000 complete charge cycles. This statistic underlines the device’s longevity compared to other electronics, which often deteriorate much faster.
The implications of battery life are significant, affecting user satisfaction, device reliance, and overall productivity. Longer battery life fosters better experiences and increases the usability of devices in various settings.
From an economic perspective, longer battery life influences consumer purchasing decisions, boosting sales for devices that promise sustained performance. Likewise, in terms of sustainability, prolonged use of devices reduces electronic waste.
Specific examples of these impacts are seen with mobile workers, who depend on devices with robust battery performance for productivity on the go. Long-lasting batteries facilitate remote work, traveling, and outdoor use without worrying about frequent charges.
To enhance battery life, Apple recommends implementing features like Low Power Mode, updating software regularly, and adjusting screen brightness. Reputable battery management practices can significantly extend device usage time.
Strategies for minimizing battery drain include disabling background app refresh, limiting location services, and utilizing Wi-Fi over cellular when possible. These practices, endorsed by tech experts, support better battery health and efficiency for all users.
How Long Can You Use an iPad 6th Gen on a Full Charge?
The iPad 6th Generation can last approximately 10 hours on a full charge under normal usage conditions. This average is based on typical activities such as browsing the internet, watching videos, and using various apps.
Battery life can vary depending on specific usage patterns. For example, video playback may consume power differently than gaming or using resource-intensive applications. Light usage, such as reading documents, may extend battery life to around 12 hours, while heavy gaming may reduce it to approximately 8 hours.
Temperature and power settings can also influence battery performance. Extreme temperatures, particularly cold environments, can lead to reduced battery efficiency. Additionally, enabling features like Bluetooth or high screen brightness can result in faster battery drain.
For illustration, if you use the iPad primarily for reading e-books with low brightness settings, the device could last longer than 10 hours. Conversely, engaging in graphic-heavy games or using GPS navigation can decrease the charge duration significantly.
It is essential to keep in mind that battery age and overall health can also affect performance. An older device may not hold a charge as effectively as a new one, leading to shorter usage times.
In summary, the iPad 6th Generation typically offers around 10 hours of usage on a full charge, influenced by usage patterns, environmental conditions, and device age. Users might explore ways to optimize battery settings or consider replacement options if battery performance declines over time.
What Factors Influence the Battery Life of an iPad 6th Gen?
The battery life of the iPad 6th Gen is influenced by several factors, including usage patterns, settings, and environmental conditions.
- Usage patterns
- Display brightness
- Background app activity
- Connectivity settings
- Battery age and health
- Software updates
These factors can interact in complex ways, impacting overall battery performance. Understanding them can help users extend their iPad’s battery life.
-
Usage Patterns:
Usage patterns significantly influence the battery life of the iPad 6th Gen. Heavy use, such as gaming or streaming videos, drains the battery faster compared to light activities like reading. According to Apple, video playback can last up to 10 hours, while web browsing may reduce that number. A study by the University of California, usiasters led by Dr. Mia Chen, found that users who frequently switch between demanding apps experience quicker battery depletion due to higher processing demands. -
Display Brightness:
Display brightness directly affects battery consumption. Higher brightness levels require more power. Users can adjust the brightness manually or enable automatic brightness, which alters the screen brightness according to ambient light conditions. Apple mentions that reducing brightness by just 50% can double the battery life of many devices, including the iPad. -
Background App Activity:
Background app activity also contributes to battery life variability. Apps running in the background can refresh content and send notifications, leading to increased energy usage. Users can manage these settings by navigating to Settings > General > Background App Refresh. A 2019 report by TechRadar indicated that disabling background activity for non-essential apps could extend battery longevity significantly. -
Connectivity Settings:
Connectivity settings involving Wi-Fi, Bluetooth, and cellular data impact battery usage levels. Keeping Bluetooth and Wi-Fi on when not in use consumes additional battery life. For instance, the iPad 6th Gen uses energy to maintain a Wi-Fi connection, even when not actively browsing. Apple recommends turning off unused connections to optimize battery life. -
Battery Age and Health:
Battery age and health affect overall performance. Over time, lithium-ion batteries degrade, reducing their ability to hold a charge. Apple suggests that battery health can be checked in Settings, allowing users to assess whether a replacement is necessary. Research by Battery University indicates that a battery typically begins to lose its capacity after 500 charge cycles, affecting the device’s longevity. -
Software Updates:
Software updates are crucial for battery performance. New versions of iOS often include optimizations that improve battery life. Apple regularly releases updates to enhance efficiency and resolve issues related to battery consumption. Staying updated ensures users benefit from these improvements and can extend their device’s operational life.
By considering these factors, users can manage and enhance the battery life of their iPad 6th Gen effectively.
How Does Usage Impact the Performance of Your iPad 6th Gen Battery?
Usage significantly impacts the performance of your iPad 6th Gen battery. When you run applications, the processor works harder, which increases energy consumption. High usage scenarios include gaming, streaming videos, and using services that require constant internet connectivity. These activities drain the battery more quickly than tasks that require less power, such as reading text or browsing simple web pages.
Background processes also affect battery performance. Apps that refresh frequently in the background, such as social media applications or email, consume energy even when not actively used.
Temperature plays a role as well. High temperatures cause batteries to deplete faster, while extremely low temperatures can temporarily reduce performance.
The settings on your iPad can also influence battery life. Features like screen brightness and location services impact usage. Lowering brightness or disabling unnecessary location tracking can extend battery performance.
In summary, active usage patterns, background processes, environmental factors, and device settings collectively determine how efficiently your iPad 6th Gen battery performs. Understanding these elements can help you manage battery life effectively.
How Can You Optimize Battery Charge and Life for an iPad 6th Gen?
You can optimize battery charge and life for an iPad 6th Gen by adjusting settings, managing apps, and employing good charging practices.
Adjust settings to prolong battery life. You can lower the brightness of the screen. A lower brightness reduces battery consumption significantly. A study by the Battery University (2021) states that display brightness can account for up to 50% of battery usage. Enabling “Low Power Mode” also helps. This mode reduces background activity and optimizes performance for essential tasks.
Manage apps wisely. Close unused apps running in the background. Background apps consume power even when not in use. Additionally, disable location services for applications that do not need them. According to Apple (2023), location services can significantly drain battery life if enabled for multiple apps.
Employ good charging practices for better battery health. Avoid letting the battery drain to 0%. Regularly charging your device when it reaches around 20% preserves battery life. Frequent shallow discharges are better than full ones, as per research by the Electric Power Research Institute (2022).
Use the original charger that came with the iPad. Using third-party chargers can increase the risk of overheating, which may damage the battery over time. Keep your device away from extreme temperatures as well. Apple (2023) recommends operating the iPad in temperatures between 32° to 95° Fahrenheit (0° to 35° Celsius) to prevent battery degradation.
By implementing these strategies, you can enhance the performance and lifespan of your iPad 6th Gen battery.
What Tips Can Help Extend the Battery Life of an iPad 6th Gen?
To extend the battery life of an iPad 6th Gen, users can adopt several effective practices.
- Lower screen brightness
- Use Wi-Fi instead of cellular data
- Enable Low Power Mode
- Reduce background app refresh
- Turn off Location Services
- Disable notifications for non-essential apps
- Close unused apps
- Keep iPad updated with the latest software
Implementing these strategies can significantly improve battery longevity.
1. Lower Screen Brightness: Lowering screen brightness can prolong battery life. The display consumes considerable power, and reducing brightness to a comfortable level helps decrease energy usage. According to Apple’s support page, reducing brightness can slow down battery drain.
2. Use Wi-Fi Instead of Cellular Data: Using Wi-Fi instead of cellular data extends battery life because the Wi-Fi radio is generally more efficient. A study from the International Journal of Computer Applications (2015) indicates that Wi-Fi consumes less battery than cellular networks.
3. Enable Low Power Mode: Activating Low Power Mode reduces background activities such as mail fetching and visual effects. According to Apple documentation, this feature can extend battery life significantly when the battery percentage is low.
4. Reduce Background App Refresh: Reducing or disabling background app refresh prevents apps from updating content when not in use. This feature can be found in Settings and helps conserve battery by limiting processes running in the background. A user study published in 2020 evaluated that disabling background app refresh can save up to 25% of battery life over a day.
5. Turn Off Location Services: Disabling Location Services for apps that do not need it avoids unnecessary battery drain. The GPS function consumes a lot of energy, and a report by the Energy Division of the Department of Energy suggests that managing location services can save significant battery life.
6. Disable Notifications for Non-Essential Apps: Notifications can wake the device and consume battery. Users should disable notifications for apps that are not essential, thus reducing the battery drain caused by constant alerts. Surveys by consumer technology organizations indicate that limiting notifications can contribute to an additional 10% savings in battery consumption.
7. Close Unused Apps: While iOS manages apps in the background efficiently, closing unused apps can help save battery life. A study conducted by Palo Alto Networks (2018) suggests that actively running apps can consume unnecessary resources.
8. Keep iPad Updated with the Latest Software: Keeping the iPad updated ensures optimal performance and battery management. Updates often include improvements in battery efficiency based on user feedback. As noted by Apple, updated devices perform more efficiently, which can lead to longer battery life.
By adopting these tips, iPad 6th Gen users can enhance the longevity of their device’s battery.
How Do Battery Settings Impact Charging Efficiency on the iPad 6th Gen?
Battery settings on the iPad 6th Gen significantly influence charging efficiency through optimization features, charge cycles, and temperature management.
- Optimization features: The iPad has a feature called “Optimized Battery Charging.” This adjusts the charging speed based on your daily routines. Apple (2020) noted that this feature slows charging past 80% until you need it, which helps prolong battery lifespan.
- Charge cycles: Each iPad battery undergoes charge cycles, which measure the complete discharge and recharge of the battery. The battery’s overall efficiency declines over its lifespan, particularly after about 500 full charge cycles (Apple, 2021). By managing the charge cycles through settings, users can maximize battery performance.
- Temperature management: The iPad 6th Gen operates best between 32°F to 95°F (0°C to 35°C). Charging the device outside this range can result in slower charging or damage. According to Apple (2020), extreme temperatures can affect the battery’s health and efficiency.
In summary, battery settings play a crucial role in the charging efficiency of the iPad 6th Gen by utilizing optimization features, managing charge cycles, and ensuring proper temperature control.
What Maintenance Practices Should You Follow for Battery Longevity?
To enhance battery longevity, follow these key maintenance practices.
- Avoid extreme temperatures.
- Charge correctly.
- Store properly.
- Use battery-saving settings.
- Update your software regularly.
Transitioning from these core practices, it is important to explore each maintenance tip in detail for better understanding.
-
Avoid Extreme Temperatures: Avoid extreme temperatures to maintain battery health. High heat can cause batteries to degrade faster, while freezing temperatures can impact performance. According to Apple, ideal operating temperatures for iPhones and iPads are between 32° to 95° Fahrenheit (0° to 35° Celsius). For example, leaving your device in a hot car can lead to thermal throttling and reduce capacity over time.
-
Charge Correctly: Charge correctly to prolong battery life. This means avoiding regular full discharges and recharges. Lithium-ion batteries, used in most modern devices, perform better when kept between 20% and 80% charge. A study by Battery University suggests that charging within this range can double lifespan.
-
Store Properly: Store properly when not in use. If you plan to store your device for an extended period, ensure it has a charge level between 40-60%. This level prevents the battery from entering a deep discharge state and losing capacity. Apple recommends storing devices in a cool, dry place away from direct sunlight.
-
Use Battery-saving Settings: Use battery-saving settings to optimize battery usage. Many devices offer settings that can limit background processes and reduce screen brightness. For instance, enabling low power mode on an iPhone can help extend battery life by reducing performance and turning off non-essential features.
-
Update Your Software Regularly: Update your software regularly to ensure you benefit from performance enhancements and fixes related to battery management. Manufacturers often release updates that improve battery efficiency. For example, a study by the International Journal of Advanced Research indicates that updated software can lead to a 20% increase in battery efficiency on certain devices.
