If you’re like most people, you probably use your GMC key fob every day to unlock your car doors and trunk. But what happens when the battery starts to die? You may not be able to get into your car at all. changing the battery in your GMC key fob is a simple process that only takes a few minutes. In this article, we’ll show you how to do it.
So, how to change battery gmc key fob?
To change the battery in your GMC key fob, start by prying open the key fob with a small flathead screwdriver. Next, remove the old battery and replace it with a new one. Finally, snap the key fob back together and test the new battery by pressing the button.
Let’s dig into it and see if we can find a solution.
Step By Step Process On: How To Change Battery Gmc Key Fob?
Here I will explain you step by step process of how to change battery gmc key fob? let’s see how to change battery gmc key fob.
Step-01:
First, locate the small square button on your GMC key fob. This button is usually located on the back of the key fob, near the bottom.
Step-02:
Gently press the square button to release the key from the fob.
Step-03:
Once the key is released, you will see the battery located inside the fob.
Step-04:
Using a small screwdriver, gently pry the battery out of the fob.
Step-05:
Once the battery is removed, take note of the type of battery that is inside. You will need to purchase a replacement battery that is the same type.
Step-06:
To install the new battery, simply insert it into the fob in the same orientation as the old battery.
Step-07:
Once the new battery is in place, gently snap the fob back together.
You’re all done! Your GMC key fob should now be working properly.
If you wanted to watch a youtube video that shows you how to change battery gmc key fob? I have included a video below:
How Do I Replace The Battery In My Gmc Key?
If you find yourself asking this question, don’t worry – you’re not alone. Many GMC drivers have trouble replacing the battery in their key fob. Luckily, it’s not a difficult task. With a little bit of patience and a few simple tools, you can replace the battery in your GMC key fob in no time.
Here’s what you’ll need:
– A small screwdriver – A new CR2032 battery
Instructions:
1. Start by removing the key ring from your GMC key fob.
2. Use the small screwdriver to remove the screw that holds the back cover in place.
3. Carefully remove the back cover, being careful not to lose the small spring that is attached to it.
4. Take out the old battery and replace it with the new one.
5. Put the back cover back on and screw it in place.
6. Reattach the key ring and you’re all done!
How Do You Change The Battery In A 2018 Gmc Key Fob?
If you find yourself asking this question, don’t worry-you’re not alone. Many people are unsure of how to change the battery in their GMC key fob, and it can be a bit of a tricky process. However, we’re here to help. In this article, we’ll walk you through the steps of changing the battery in a 2018 GMC key fob.
First, start by locating the small Phillips head screws on the back of the key fob. There are usually two of them, and they’re located near the bottom of the key fob. Use a screwdriver to remove these screws, and then gently pry the back of the key fob open.
Once the back of the key fob is open, you should see the battery. It will likely be a small, round CR2032 battery. Using a small flathead screwdriver, gently pry the old battery out of the key fob and dispose of it properly.
To insert the new battery, simply place it in the key fob with the positive side (the side with the plus sign) facing up. Once the new battery is in place, gently snap the back of the key fob into place and screw it shut.
And that’s it! You’ve now successfully changed the battery in your 2018 GMC key fob.
How Do You Change The Battery In A Gmc 2020 Key Fob?
If you’re like most people, you probably don’t think about your car key fob until it stops working. Then you’re faced with the dilemma of how to change the battery in a GMC 2020 key fob.
If you’re not familiar with car key fobs, they are small devices that are used to remotely unlock and lock your car doors. They usually have a small button on the front that you press to activate the locking or unlocking function.
The battery in a car key fob is typically a CR2032 coin cell battery. These batteries are very small and can be difficult to replace if you’ve never done it before.
Here’s a step-by-step guide on how to change the battery in a GMC 2020 key fob:
1. Start by removing the key fob from your keychain. Most key fobs have a small hole on the back that you can insert a paperclip or other small tool into to release the fob.
2. Once the key fob is released, you should see a small screw that is holding the back cover in place. Use a small screwdriver to remove this screw and then carefully pry the back cover off of the key fob.
3. Inside the key fob, you will see the battery and a small metal contact point. Use a small flathead screwdriver to carefully pry the old battery out of the key fob.
4. Take your new CR2032 battery and insert it into the key fob, making sure that the positive ( + ) side is facing up.
5. Replace the back cover of the key fob and screw it in place. Test the key fob to make sure that the battery is working by pressing the button. The LED light on the key fob should illuminate when you press the button.
If your GMC 2020 key fob doesn’t have a back cover that can be removed, then the battery is likely not replaceable. In this case, you will need to purchase a new key fob from GMC.
What Battery Does A Gmc Key Fob Take?
A GMC key fob battery takes a ACDelco CR2032 3 volt lithium battery. This type of battery is also used in GM OE Keyless Entry Remotes. The CR2032 battery can be found in model years 1996-2015 GM remotes. You should check the key fob battery currently in your remote to ensure you are ordering the correct replacement.
Moreover, The ACDelco CR2032 Keyless Entry Key Fob Battery is a long lasting, 3 volt lithium battery. This key fob battery can be used for GM OE Keyless Entry Remotes. You can find the CR2032 battery in model years 1996-2015 GM remotes. To make sure you are ordering the correct replacement, check the key fob battery currently in your remote.
What Is The Average Lifespan Of A Gmc Key Fob Battery?
This is a difficult question to answer, as there are a number of variables that can affect the lifespan of a GMC key fob battery. However, we can give you some general guidelines.
First, it is important to note that the type of battery used in your GMC key fob can have a significant impact on its lifespan. Many GMC key fobs use lithium ion batteries, which tend to have a longer lifespan than other types of batteries.
Second, how often you use your GMC key fob can also affect its lifespan. If you use it frequently, the battery will likely need to be replaced more often than if you use it infrequently.
Finally, the environment in which you use your GMC key fob can also affect its lifespan. If you live in a warm climate, the battery will likely need to be replaced more often than if you live in a cooler climate.
In general, you can expect your GMC key fob battery to last for several years. However, if you use it frequently or live in a warm climate, you may need to replace it sooner.
How To Change Battery In 2019 Gmc Key Fob?
If you find yourself in need of a battery change in your 2019 GMC key fob, don’t fret! This process is actually quite simple and can be done in just a few minutes. All you’ll need is a small screwdriver and a new CR2032 battery.
To begin, locate the small screw on the back of the key fob. Use your screwdriver to remove this screw, which will then give you access to the battery compartment. Next, take out the old battery (which should be a CR2032) and insert the new one, making sure that the positive side is facing up. Once the new battery is in place, simply screw the back plate back on and you’re all set!
If you have any trouble with this process, be sure to consult your GMC owner’s manual for further instructions.
How To Change Battery In 2018 Gmc Yukon Key Fob?
If you find yourself in need of a battery change in your 2018 GMC Yukon key fob, don’t fret! This process is actually quite simple and can be completed in just a few minutes. Here’s a step-by-step guide on how to do it:
1. Start by locate the small Phillips head screw on the back of the key fob. Use a screwdriver to remove this screw.
2. Once the screw is removed, you should be able to gently pry open the back casing of the key fob.
3. Inside the key fob, you will see the battery. It will be clearly marked with a + or – sign, indicating which way it needs to be inserted.
4. Using a small flathead screwdriver or your fingernail, carefully remove the old battery from the key fob.
5. Take your new battery and insert it into the key fob, making sure that the + or – sign is facing the correct way.
6. Once the new battery is in place, simply snap the back casing of the key fob shut and screw it back in place.
And that’s it! You’ve now successfully changed the battery in your GMC Yukon key fob.
How To Change The Battery In A 2018 Gmc Terrain Key Fob?
If you own a 2018 GMC Terrain, then you know that the key fob is an essential part of the vehicle. The key fob allows you to lock and unlock your doors, start the engine, and even open the trunk. But what happens when the battery in your key fob starts to die?
Don’t worry, changing the battery in your GMC Terrain’s key fob is a quick and easy process. All you need is a small screwdriver and a new CR2032 battery. Follow the steps below and you’ll have your key fob working like new in no time.
1. Start by removing the key fob from your key ring. You’ll notice that the back of the key fob is held on by a small Phillips screw.
2. Use your screwdriver to remove the screw, then carefully pry the back of the key fob open.
3. Once the back of the key fob is open, you’ll see the battery inside. Use your fingers or a small pair of tweezers to remove the old battery.
4. Take your new CR2032 battery and insert it into the key fob, making sure that the positive (+) side is facing up.
5. Close the back of the key fob and screw it back on.
That’s it! You’ve now successfully changed the battery in your 2018 GMC Terrain key fob.
How To Change The Battery In The “Notched” Gmc Key Fob?
If you own a GMC vehicle with the “Notched” key fob, you may be wondering how to change the battery. Here’s a quick guide on how to do it:
1. Start by locating the small notch on the back of the key fob.
2. Use a small flathead screwdriver or a similar tool to pry open the notch.
3. Once the notch is pried open, you should be able to see the battery inside.
4. Use a small Phillips head screwdriver to remove the two screws that hold the battery in place.
5. Carefully remove the old battery and insert the new one, making sure the positive and negative sides are facing the correct way.
6. Replace the screws and snap the key fob back together.
And that’s it! You should now have a key fob with a fresh battery that’s ready to go.
How To Change The Battery In The “Flip” Gmc Key Fob?
If you own a GMC vehicle equipped with a “flip” key fob, you may need to know how to change the battery at some point. The good news is that this is a relatively easy process that you can do at home with just a few tools.
The first thing you need to do is locate the small release button on the back of the key fob. This is usually located near the bottom. Once you have found the release button, use a small flathead screwdriver or a paperclip to depress it. This will release the back cover of the key fob.
Once the back cover is off, you will see the battery inside. It is important to note the orientation of the battery before you remove it. This will make it easier to put the new battery in the correct way.
To remove the old battery, simply use your thumb or a small flathead screwdriver to pry it out of the key fob. Once the old battery is out, insert the new battery in its place, being sure to orient it the same way as the old one.
Once the new battery is in place, simply snap the back cover of the key fob back on and you’re done!
How To Change The Battery In The “Classic” Gmc Key Fob?
If you own a GMC car with a “classic” key fob, you may eventually need to change the battery. Here’s a quick and easy guide on how to do it:
1. Start by locating the small screw on the back of the key fob.
2. Use a small screwdriver or a key to remove the screw.
3. Carefully pull the back cover off the key fob.
4. You should now see the battery inside the key fob.
5. Use a small flathead screwdriver to carefully pry the old battery out of the key fob.
6. Insert the new battery into the key fob, making sure that the positive (+) side is facing up.
7. Replace the back cover of the key fob and screw it back on.
8. That’s it! Your key fob should now be working properly.
How To Change The Battery In The “Curved” Gmc Key Fob?
If you have a GMC key fob with a curved design, then you may be wondering how to change the battery. The process is actually quite simple and only takes a few minutes to complete.
First, start by locating the small slot on the back of the key fob. This is where you will insert a small flathead screwdriver or other tool.
Once the screwdriver is inserted, twist it to the left until the back panel pops off.
Inside the key fob, you will see a small battery. Carefully remove this battery and replace it with a new one. Make sure that the new battery is installed in the same direction as the old one.
Once the new battery is in place, simply snap the back panel back into place. Your GMC key fob should now be working properly!
How To Change The Battery In The “Simple” Gmc Key Fob?
If you own a GMC vehicle, chances are you have a key fob that allows you to remotely start your car and unlock your doors. These key fobs are convenient, but they can also be expensive to replace if the battery dies.
If you’re looking to save some money, you can replace the battery in your GMC key fob yourself. It’s a relatively simple process that only takes a few minutes.
Here’s a step-by-step guide on how to change the battery in your GMC key fob:
1. Start by removing the key chain from your key fob. This will give you better access to the back of the key fob.
2. Using a small flathead screwdriver, pry open the back of the key fob.
3. Take out the old battery and note which way it was facing. This will help you insert the new battery in the correct orientation.
4. Insert the new battery, making sure it’s facing the same way as the old one.
5. Close the back of the key fob and reattach the key chain.
And that’s it! You’ve successfully changed the battery in your GMC key fob.
Final Word
If your GMC key fob battery is running low, it’s easy to change it out. All you need is a small flathead screwdriver and a new CR2032 battery. Just pop off the back of the key fob, remove the old battery, and insert the new one. That’s it! Your key fob will be good as new.
FAQ
What Is The Average Cost To Replace The Battery In A 2019 Gmc Yukon Key Fob?
The average cost to replace the battery in a 2019 GMC Yukon key fob is $32.50.
Related Post:
