If your Hyundai Sonata key fob battery is dead, you’re going to need to know how to change it. Don’t worry, it’s not as difficult as it might seem. In this article, we’ll walk you through the process step-by-step so you can get back on the road in no time.
So, how to change battery hyundai sonata key fob?
If your Hyundai Sonata’s key fob battery is dead, you can change it in a few simple steps. First, remove the key fob from the key ring. Next, locate the small screw on the back of the key fob and remove it. Once the screw is removed, you will be able to pop the back of the key fob open. Inside, you will see the battery. Remove the old battery and insert the new one. Be sure to line up the positive and negative ends of the battery before snapping the back of the key fob shut. Screw the back of the key fob shut and test the new battery by pressing the button on the key fob.
Let’s dig into it and see what’s inside.
Step By Step Process On: How To Change Battery Hyundai Sonata Key Fob?
Here I will explain you step by step process of how to change battery hyundai sonata key fob? let’s see how to change battery hyundai sonata key fob.
Step-01:Order the correct battery type The first step is to order the correct battery type for your key fob. You will need a CR2032 battery for this process. You can find these batteries online or at your local hardware store.
Step-02: Separate the two halves of the key fob Once you have the battery, take the key fob and press the button to release the internal key. Put the key to the side and look for the keyhole. There will be a small slot next to the keyhole. Insert a flathead screwdriver into the slot and twist to separate the two halves of the key fob. You should be able to pull the two halves apart with your fingers.
Step-03: Remove the old battery Once the key fob is separated, you will see the old battery in its housing. You can use a precision screwdriver, a toothpick, or a similar tool to carefully remove the old battery. Target the top right area of the battery and insert your tool all the way down to the bottom. Pry the battery out, being careful not to damage the housing.
Step-04: Install the new battery Once the old battery is removed, take your new CR2032 battery and make sure the positive side is facing down. Install the battery into the housing, pushing the bottom down first. Push on the top of the battery to make sure it is flush with the housing.
Step-05: Reconnect the two halves of the key fob Once the new battery is installed, reconnect the two halves of the key fob by clicking them back together. The key fob should turn on if the battery has juice. If the key fob does not turn on, check the battery to make sure it is installed properly.
If you wanted to watch a youtube video that shows you how to change battery hyundai sonata key fob? I have included a video below:
How Do You Change The Battery In A Key Fob For Hyundai Sonata?
If you’re like most people, you probably don’t think about the battery in your key fob very often. But, believe it or not, the battery is actually a very important part of your key fob. Without it, your key fob wouldn’t be able to do its job properly.
So, what do you do when the battery in your key fob starts to die? Well, changing it is actually a pretty simple process. Here’s a quick step-by-step guide on how to do it:
1. First, you’ll need to find a replacement battery. You can usually find these at your local hardware store or online.
2. Once you have the new battery, open up your key fob. There should be a small screw or clip holding the back cover in place.
3. Remove the back cover and take out the old battery.
4. Put the new battery in its place and reattach the back cover.
5. That’s it! You’ve successfully changed the battery in your key fob.
How Do You Change The Battery In A 2017 Hyundai Sonata Key Fob?
If you find yourself in need of changing the battery in your 2017 Hyundai Sonata key fob, never fear! This process is actually quite simple and only takes a few minutes to complete. Here are the steps you’ll need to follow:
1. Start by locating the release button on the back of the key fob. This is usually located near the bottom of the fob. Pressing this button will release the back panel of the fob, exposing the battery.
2. Use a small flathead screwdriver or a coin to pry open the battery compartment. You may need to apply a bit of pressure to get it open.
3. Once the compartment is open, remove the old battery and insert the new one. Make sure that the positive (+) side of the battery is facing up.
4. Close the battery compartment and snap the back panel of the key fob back into place.
That’s it! You’ve now successfully changed the battery in your Hyundai Sonata key fob.
How Do You Change The Battery In A Key Fob For A 2021 Hyundai Sonata?
If you’re like most people, you probably don’t think about your car’s key fob until it’s time to change the battery. And if you’ve never done it before, the process can seem a bit daunting. But don’t worry, we’re here to help!
The first thing you’ll need to do is locate the battery cover. On most key fobs, this is located on the back of the unit. Once you’ve found the cover, use a small flathead screwdriver or a butter knife to pry it open.
Once the cover is off, you should see the battery. It will be clearly marked with a + or – sign, so you’ll know which way to orient it when you put the new one in.
With the old battery out, it’s time to put the new one in. Again, make sure you orient it correctly so the + or – sign is facing the right way. Once the new battery is in, replace the cover and you’re all set!
If your key fob still isn’t working after you’ve changed the battery, it’s possible that the issue is with the key fob itself and not the battery. In that case, you’ll need to take it to a professional to have it diagnosed and repaired.
What Size Battery Does A Hyundai Sonata Key Fob Take?
A Hyundai Sonata key fob uses a CR 2032 battery. You can find these batteries online and do this entire process at home. It’s very simple. The entire process should take no more than a few minutes and you’ll be back on the road in no time.
Along with, This key fob was used between 2015 and 2020 and uses a CR 2032 battery. You can find these batteries online and do this entire process at home. It’s very simple. You just need to remove the old battery and replace it with a new one.
Can I Replace My Hyundai Sonata Key Fob Myself?
If you’re asking yourself this question, then the answer is probably no. Key fobs are complex little devices, and unless you’re a professional locksmith or car alarm specialist, it’s unlikely that you have the skills and tools necessary to program one yourself. However, if you’re willing to put in a little time and effort, it is possible to learn how to do it.
There are a few different ways to program a Hyundai Sonata key fob, and the specific method you’ll need to use will depend on the year and model of your vehicle. The good news is that there are plenty of resources available online that can walk you through the process step-by-step.
One thing to keep in mind, however, is that programming a key fob can be a bit of a trial-and-error process. So, if you’re not comfortable with potentially making a mistake, it’s probably best to leave it to the professionals.
What Is The Hyundai Key Fob Low Battery Warning?
2. How to change a flat tire on a Hyundai
3. How to use Hyundai’s emergency features
4. What to do if your car won’t start
5. How to jump start a Hyundai
6. How to change a headlight on a Hyundai
7. How to check and add oil to a Hyundai
8. How to replace a Hyundai’s windshield wipers
9. How to use Hyundai’s navigation system
10. How to program a Hyundai’s garage door opener
How To Replace Hyundai Key Fob?
If your Hyundai key fob has stopped working, don’t worry – it’s a relatively easy fix. In this blog post, we’ll show you how to replace your Hyundai key fob battery in just a few simple steps.
First, locate the release button on the back of your key fob. This is usually located near the bottom of the fob. Press the release button and the back of the key fob will pop open.
Next, remove the old battery from the key fob. You may need a small flathead screwdriver to pry the old battery out.
Once the old battery is out, insert the new battery in its place. Make sure the positive ( + ) side of the battery is facing up.
Close the back of the key fob and you’re all set! Your Hyundai key fob should now be working properly.
How Do You Replace The Battery In A Hyundai Key Fob?
If your Hyundai key fob has a dead battery, you’ll need to replace it before you can use it again. Fortunately, this is a relatively easy process that you can do at home with just a few tools.
First, start by removing the key fob from your key ring. You’ll then need to locate the small Phillips screw on the back of the key fob and remove it.
Once the screw is removed, you should be able to gently pry the back cover off of the key fob. Be careful not to lose the small spring that may be attached to the back cover.
With the back cover off, you should now see the dead battery. Use a small screwdriver or a knife to gently pry the old battery out of the key fob.
Now it’s time to install the new battery. Most key fobs use CR2032 batteries, which can be found at most stores that sell batteries. Once you have the new battery, simply insert it into the key fob and replace the back cover.
Screw the back cover back on, and your key fob should now be working again. If it’s not, you may need to take it to a dealer or locksmith to have it reprogrammed.
What Type Battery Keyless Entry Remote Use?
If you’ve ever wondered what type of battery your keyless entry remote uses, you’re not alone. Many people are curious about this topic, and for good reason. After all, keyless entry remotes are an essential part of our lives, and we rely on them to work properly every day.
The most common type of battery used in keyless entry remotes is the lithium ion battery. These batteries are known for their high energy density and long life span. They are also rechargeable, which means you won’t have to replace them as often as you would with other types of batteries.
Another type of battery used in keyless entry remotes is the alkaline battery. These batteries are less expensive than lithium ion batteries, but they don’t last as long. They also have a lower energy density, which means they won’t work as well in cold weather.
If you’re not sure which type of battery your keyless entry remote uses, the best way to find out is to consult the owner’s manual. It should be listed in there. If you can’t find it, you can always call the manufacturer and ask.
In general, keyless entry remotes use either lithium ion batteries or alkaline batteries. Both types have their advantages and disadvantages, so it’s up to you to decide which one is right for you.
How To Replace The Hyundai Sonata “Flip” Key Fob Battery (2015, 2016, 2017, 2018, 2019, 2020)?
If you own a Hyundai Sonata from the years 2015-2020, you may have noticed that your key fob is starting to act a little funky. Maybe it’s not working as well as it used to, or the battery is dying faster than it used to. If that’s the case, then it’s probably time to replace the battery in your key fob.
Here’s a quick and easy guide on how to do just that:
1. Start by removing the key fob from your key ring. There should be a small release button on the side that you can press to remove the fob.
2. Once the key fob is removed, take a look at the back. You should see a small screw that is holding the back cover in place. Use a small screwdriver to remove this screw.
3. With the screw removed, you should now be able to pop the back cover off of the key fob. Be careful not to lose the small spring that may be attached to the back cover.
4. Once the back cover is off, you will see the battery inside. It is usually held in place by a small piece of tape. Use your fingernail or a small flathead screwdriver to carefully pry the battery out.
5. Take your new battery and place it in the key fob, making sure that the positive ( + ) side is facing up. If there was a piece of tape holding the old battery in place, you can use that to secure the new battery.
6. Replace the back cover and screw, then give the key fob a test. If it’s working properly, you’re all set! If not, then you may need to consult a professional.
And that’s all there is to it! Replacing the battery in your Hyundai Sonata key fob is a quick and easy process that anyone can do.
How Much Does It Cost To Replace A Fob’S Battery?
If you’re like most people, you probably don’t think about your car key fob’s battery until it’s too late. You’re either in a hurry to get somewhere and your key fob doesn’t work, or you’re stranded somewhere with a dead key fob. Either way, it’s frustrating and inconvenient. So, how much does it cost to replace a key fob battery?
The cost to replace a key fob battery will vary depending on the make and model of your car as well as the type of key fob. Some key fobs can be as cheap as $20 to replace, while others can cost up to $100. To get an accurate estimate, it’s best to contact your local dealership or car locksmith.
If you find yourself in a situation where you need to replace your key fob battery, there are a few things you can do to make the process go as smoothly as possible. First, be sure to have your car’s make, model, and year handy. This will help the locksmith or dealership identify the correct key fob for your car.
Next, be sure to have your VIN (vehicle identification number) handy. This will help the locksmith or dealership confirm that the key fob they’re giving you is indeed for your car.
Finally, be sure to ask for a receipt. This will help you keep track of the cost of the replacement key fob battery and will also come in handy if you need to file a warranty claim.
How Do You Know If Your Remote Key Fob Needs A Battery Replacement?
If your car remote key fob starts to act up, it might be time for a battery replacement. Here are a few signs that your remote key fob needs a new battery:
-The key fob feels “sluggish” when you press the buttons
-The key fob’s range is shorter than it used to be
-The key fob doesn’t work as consistently as it used to
-The key fob’s buttons feel “sticky” or unresponsive
If you’re experiencing any of these issues, it’s probably time for a new battery. Most key fobs use CR2032 batteries, which are widely available at most stores that sell batteries.
What Kind Of Battery Does A 2019 Hyundai Sonata Keyless Entry Remote Take?
Assuming you are asking about the key fob battery:
The 2019 Hyundai Sonata keyless entry remote takes a CR2032 3V coin-type battery.
Final Word
If your Hyundai Sonata’s key fob battery is dead, don’t panic! Changing the battery is a quick and easy process that anyone can do. Here’s how:
1. Start by removing the key fob from your keychain.
2. Locate the small screw on the back of the key fob.
3. Using a small screwdriver, unscrew the screw and remove the back cover of the key fob.
4. Inside the key fob, you will see a small battery.
5. Using a small flathead screwdriver, gently pry the old battery out of the key fob.
6. Insert the new battery into the key fob, making sure that the positive and negative sides are facing the correct way.
7. Replace the back cover of the key fob and screw it back into place.
8. That’s it! You’ve successfully changed the battery in your Hyundai Sonata’s key fob.
FAQ
Where Can I Find A Replacement Battery For My 2018 Hyundai Sonata Key Fob?
If you’re looking for a replacement battery for your 2018 Hyundai Sonata key fob, you’ll need to head to your local Hyundai dealership. Once there, you’ll be able to purchase the correct battery and have it installed by a professional.
Related Post:
