How To Change Battery In Equinox Key Fob?

As an Amazon Associate, I Earn From Qualifying Purchases.

Last Updated on September 11, 2022 by Ellis Gibson (B.Sc. in Mechanical Engineering)

Do you have a Chevrolet Equinox from 2018-2021? If so, then you might be having issues with your key fob. In particular, the battery in your key fob might need to be replaced. Luckily, this is a relatively easy process that you can do at home. In this article, we’ll walk you through the steps of how to change the battery in your Chevrolet Equinox key fob.

So, how to change battery in equinox key fob?

To change the battery in your Chevrolet Equinox key fob, follow these steps:

1. Remove the key fob from the key ring.

2. Locate the small screw on the back of the key fob.

3. Using a small screwdriver, remove the screw.

4. Carefully pry open the back of the key fob.

5. Remove the old battery and insert a new CR2032 battery.

6. Snap the back of the key fob closed.

7. Screw the back of the key fob closed.

Your Chevrolet Equinox key fob should now be working properly.

Let’s dig into it and see if we can get to the bottom of it.

Step By Step Process On: How To Change Battery In Equinox Key Fob?

Here I will explain you step by step process of how to change battery in equinox key fob? let’s see how to change battery in equinox key fob.

Step-01:

To begin, you will need a small flathead screwdriver.

Step-02:

With the key fob remote in your hand, press the button to release the key.

Step-03:

Once the key is released, insert the screwdriver into the key slot and gently pry the key fob open.

Step-04:

You may need to run the screwdriver along the sides of the key fob to get it to open all the way.

Step-05:

Once the key fob is open, remove the key and any other items that may be inside.

Step-06:

Locate the battery inside the key fob. The battery in this key fob is a CR2032.

Step-07:

Use the screwdriver to help pop the old battery out.

Step-08:

To replace the battery, simply snap the new battery into place. Be sure to insert the new battery with the plus side down.

Step-09:

Once the new battery is in place, line the key fob back together and snap it closed.

Step-10:

Replace the key and you’re all set!

If you wanted to watch a youtube video that shows you how to change battery in equinox key fob? I have included a video below:

How Do You Change The Battery In A 2018 Equinox Key Fob?

If your 2018 Equinox key fob starts to act up, it might be time to change the battery. Here’s a quick and easy guide on how to do just that:

1. Start by locating the small screw on the back of the key fob. Use a small screwdriver to remove the screw.

2. Once the screw is removed, you should be able to gently pry open the back of the key fob.

3. Inside, you’ll see the battery. Carefully remove the old battery and replace it with a new one.

4. Once the new battery is in place, simply snap the back of the key fob closed and screw the back on.

That’s it! You should now have a key fob that works like new.

What Kind Of Battery Goes In A Chevy Equinox Key Fob?

If you need to replace the battery in your Chevy Equinox key fob, you’ll need to know what kind of battery to use. The key fob uses a CR2032 3V battery, which can be found at most electronics stores. To replace the battery, first open the key fob and remove the circuit board and buttons. Once you can see the old battery, remove it using a small flathead screwdriver. Install a new CR2032 3V battery, being careful to ensure that the positive side is in the same position as the old battery.

Moreover, In order to change the battery in a key fob, open the fob and remove the circuit board and buttons to reveal the old battery. Using a small flathead screwdriver, remove the old battery and install a new CR2032 3V battery, making sure that the positive side is in the same position as the old battery.

How Do You Change The Battery In A 2011 Chevy Equinox Key Fob?

If you need to change the battery in your 2011 Chevy Equinox key fob, there are a few things you need to know. First, the battery in your key fob is not the same as the one in your car. It is a CR2032 coin-cell battery, and you can find them at most electronics stores. Second, you need to be careful when changing the battery in your key fob. The circuit board and electronic components in the key fob are delicate, and you don’t want to damage them.

To change the battery in your key fob, start by removing the key ring. There is usually a small tab or notch that you can push to release the ring. Once the key ring is off, you will see a small screw holding the back of the key fob together. Use a small screwdriver to remove the screw, and then carefully pry the back of the key fob open. Be careful not to damage the back of the key fob, as you will need to snap it back into place when you are finished.

Once the back of the key fob is open, you will see the battery and the circuit board. Carefully remove the old battery from the circuit board and discard it. Then, take your new CR2032 battery and insert it into the circuit board, making sure that the positive side is facing up. Once the new battery is in place, snap the back of the key fob into place and screw it shut. Then, reattach the key ring and you are all set!

How Do You Change The Battery In A 2020 Chevy Equinox Key Fob?

If you find yourself asking this question, don’t worry, you’re not alone. The 2020 Chevy Equinox key fob is a little different than previous years and can be tricky to change the battery in. Here’s a step-by-step guide on how to do it:

1. Start by finding a small Phillips head screwdriver.

2. Use the screwdriver to remove the two screws on the back of the key fob.

3. Carefully pry open the back of the key fob.

4. Once the back is open, you’ll see the battery.

5. Carefully remove the old battery and replace it with a new one.

6. Put the back of the key fob on and screw it in place.

7. That’s it! You’ve successfully changed the battery in your 2020 Chevy Equinox key fob.

What Is The Procedure For Replacing The Key Fob Battery In A Chevy Equinox?

If you have a Chevy Equinox, you may be wondering how to replace the key fob battery. The process is actually quite simple and only takes a few minutes. Here’s what you need to do:

1. Start by removing the key fob from your keychain.

2. Locate the small hole on the back of the key fob.

3. Insert a small flathead screwdriver or other sharp object into the hole.

4. Gently pry open the back of the key fob.

5. Remove the old battery and replace it with a new one.

6. Snap the back of the key fob closed.

7. You’re all set! Your key fob should now be working properly.

How To Change The Battery In A 2019 Chevy Equinox Key Fob?

If you own a 2019 Chevy Equinox, you may be wondering how to change the battery in your key fob. Here’s a quick guide to help you out.

First, locate the small release button on the back of your key fob. You’ll need a small tool, like a paperclip, to press this button.

Once the button is pressed, the back of the key fob will pop open. Inside, you’ll see the battery. Carefully remove the old battery and replace it with a new one.

Be sure to dispose of the old battery properly. Then, snap the back of the key fob closed and you’re all set!

How To Change The Battery In A 2018 Chevy Equinox Key Fob?

If you own a 2018 Chevy Equinox, you may be wondering how to change the battery in the key fob. The process is actually quite simple and only takes a few minutes.

Here’s what you’ll need:

– A new CR2032 battery

– A small flathead screwdriver

– A Phillips head screwdriver

First, use the small flathead screwdriver to pry open the back cover of the key fob. You’ll see the battery compartment and two small Phillips head screws.

Remove the screws and then pop out the old battery. Be careful not to lose the small metal plate that’s attached to the battery compartment – this is what makes contact with the new battery.

Now, insert the new battery, making sure that the metal plate is in contact with the positive side of the battery. Replace the back cover and screw it in place.

That’s it! You’ve now successfully changed the battery in your Chevy Equinox key fob.

How To Change Battery In 2015 Chevy Equinox Key Fob?

If you’re like most people, you probably don’t think about your car key fob until it stops working. Then you’re stuck with a key that you can’t use to unlock your car doors or start the engine. If your key fob has a dead battery, it’s easy to change it yourself. Here’s a step-by-step guide on how to change the battery in a 2015 Chevy Equinox key fob.

1. Start by locating the small screw on the back of the key fob. Use a small screwdriver to remove the screw.

2. Once the screw is removed, you should be able to pop open the back of the key fob.

3. Inside the key fob, you’ll see a small battery. Use a small flathead screwdriver to pry the old battery out of the key fob.

4. Take the new battery and insert it into the key fob, making sure the positive and negative sides are facing the correct way.

5. Close the back of the key fob and screw it shut.

That’s it! You’ve now successfully changed the battery in your 2015 Chevy Equinox key fob.

How To Replace Battery In 2019 Equinox Key Fob?

It’s 2019 and time to start thinking about replacing the battery in your 2019 Equinox key fob. This is a quick and easy process that anyone can do, and it’s a great way to extend the life of your key fob.

First, start by locating the battery compartment. This is usually on the back of the key fob, and it will be clearly marked. Once you’ve found the compartment, open it up and remove the old battery.

Next, take your new battery and insert it into the compartment. Make sure that the positive and negative sides are lined up correctly, and then close the compartment.

That’s it! You’ve now successfully replaced the battery in your 2019 Equinox key fob.

How To Replace The Battery Video Guide?

Replacing the battery in your car is a pretty simple process, but it’s one that can be easily overlooked. After all, it’s not like you have to do it very often. But when the time comes, it’s good to have a quick and easy guide to follow.

This video will show you how to replace the battery in your car in just a few simple steps. You’ll need a few tools and supplies, but nothing that you probably don’t already have around the house.

First, you’ll need to locate the battery in your car. It’s usually located in the engine bay, but it can also be found in the trunk. Once you’ve found it, disconnect the negative terminal first, and then the positive terminal.

Next, you’ll need to remove the old battery from its tray. This is usually held in place by a few bolts, so you’ll need a wrench to loosen them. Once the old battery is out, you can put the new one in its place.

Be sure to connect the terminals in the correct order, positive first and then negative. Once both terminals are secure, you can close up the battery tray and start your car.

If your car doesn’t start right away, don’t worry. It can sometimes take a few tries for the new battery to get going. But once it does, you’ll be back on the road in no time.

How Regularly Should Keyless Entry Remote Batteries Be Replaced?

If you’re like most people, you probably don’t think about your keyless entry remote batteries very often. After all, they seem to last forever! But the truth is, all batteries have a limited lifespan, and keyless entry remote batteries are no exception. So how often should you replace them?

The answer depends on a few factors, including the type of battery you’re using and how often you use your keyless entry remote. We recommend replacing keyless entry remote batteries every two to three years, or sooner if you notice that your remote isn’t working as well as it used to.

If you want to be extra careful, you can also keep a spare set of batteries on hand so you can replace them as soon as you notice a decrease in performance. That way, you’ll never have to worry about being caught without a working remote!

What Are The Pros And Cons Of Not Making Battery Water?

The pros of not making battery water are that you will save time and money. Also, your battery will last longer because there is no need to constantly top it off with water. The cons of not making battery water are that your battery will eventually sulfate and die. Also, if you live in a hot climate, your battery will not last as long because it will overheat without water to dissipate the heat.

How To Change Battery In 2015 Chevy Equinox Key Fob?

If you’re like most people, you probably don’t think about your car’s key fob until it stops working. Then you’re scrambling to figure out how to change the battery in your Chevy Equinox key fob. Luckily, it’s a pretty simple process that anyone can do.

First, you’ll need to locate the battery cover. On most key fobs, this is located on the back. Once you’ve found the cover, pry it open with a flat head screwdriver or a similar tool.

Once the cover is off, you’ll see the battery inside. It will be clearly marked with a “+” or a “-” sign, indicating the correct orientation. Gently remove the old battery and insert the new one, making sure it’s in the correct orientation.

Once the new battery is in place, replace the cover and screw it back on (if applicable). Test your key fob to make sure it’s working properly. If not, consult your owner’s manual or contact a qualified automotive locksmith or dealer.

And that’s it! You’ve successfully changed the battery in your Chevy Equinox key fob.

Final Word

It’s easy to change the battery in your Chevrolet Equinox key fob, and we’ll show you how! Just follow these simple steps and you’ll have a new battery in no time.

First, locate the battery cover on the back of the key fob. There is usually a small tab or notch that you can pry open with a fingernail or a small flathead screwdriver.

Once the cover is off, remove the old battery and insert the new one, making sure that the positive (+) side is facing up.

Replace the battery cover and you’re all set! If your key fob still isn’t working after changing the battery, you may need to reprogram it.

FAQ

How To Change Battery In 2012 Chevy Equinox Key Fob?

If your 2012 Chevy Equinox key fob starts to act up, it might be time to change the battery. Here’s a quick and easy guide on how to do just that:

1. Start by removing the key fob from the key ring. You’ll need to use a small screwdriver or similar tool to pop open the back of the key fob.

2. Once the back is off, you’ll see the battery inside. Carefully remove the old battery and discard it.

3. Now, it’s time to insert the new battery. Make sure the positive (+) side is facing up, then gently push the battery into place.

4. Close up the back of the key fob and you’re all set! Your 2012 Chevy Equinox key fob should now be working like new.

What Is The Battery Size For A 2017 Chevy Equinox Key Fob?

The answer is that the battery size for a 2017 Chevy Equinox key fob is CR2032. This is a 3 volt battery that is commonly used in key fobs. If you need to replace the battery in your key fob, you can find this information in the owner’s manual or online.

What Is The Process For Replacing A Lost Or Damaged Key Fob For A Chevy Equinox?

If you have lost or damaged your key fob for your Chevy Equinox, you will need to follow a few simple steps in order to get a replacement. First, you will need to locate your local Chevy dealer or locksmith. Once you have found a reputable source, you will need to purchase a new key fob. Be sure to have the make, model, and year of your Chevy Equinox on hand when you make your purchase.

Once you have your new key fob, you will need to program it to your Equinox. This can be done by either using the “Learn” function on your vehicle’s infotainment system, or by following the instructions that came with your new key fob. Once your new key fob is programmed, you will be able to use it just like your old one!

Related Post:

Share
Tweet
Pin
Share