How To Change Battery In Vr Controller?

As an Amazon Associate, I Earn From Qualifying Purchases.

Last Updated on September 15, 2022 by Ellis Gibson (B.Sc. in Mechanical Engineering)

If your virtual reality headset doesn’t work, it might be because the batteries in the controllers are dead. In this article, we’ll show you how to change the batteries in your VR controller so you can get back to gaming.

So, how to change battery in vr controller?

To change the battery in your VR controller, follow these steps:

1. Remove the controller from your VR headset.

2. Remove the battery cover by unscrewing it.

3. Remove the old battery and insert a new one.

4. Screw the battery cover back on.

5. Reattach the controller to your VR headset.

Let’s dig into it and see if we can solve the mystery.

Step By Step Process On: How To Change Battery In Vr Controller?

Here I will explain you step by step process of how to change battery in vr controller? let’s see how to change battery in vr controller.


  1. Phillips head screwdriver

2. Flat head screwdriver

3. New AA batteries

4. VR controller

Step-01: Locate the battery cover on your VR controller.

Step-02: Gently remove the cover by moving it with your fingers.

Step-03: Take out the old battery from the compartment.

Step-04: Insert the new battery into the compartment.

Step-05: Close the battery cover.

If you wanted to watch a youtube video that shows you how to change battery in vr controller? I have included a video below:

Where Is The Battery In Vr Controller?

Assuming you are referring to a virtual reality (VR) controller, the battery is typically located in the back or bottom of the controller. It is important to make sure the controller is turned off before removing the battery.

How Do You Remove A Vr Battery?

Assuming you would like a blog discussing how to remove a VR battery:

“How do you remove a VR battery?” is a question I get a lot, so I figured I would write a quick blog post about it. There are a few different ways to remove a VR battery, and the best way for you will depend on the type of VR headset you have.

If you have an Oculus Rift, you can simply unscrew the battery cover and remove the batteries. For the HTC Vive, you will need to remove the foam face cushion first, and then you can access the batteries.

Once you have removed the batteries, you can either put them back in the headset or keep them out. If you keep them out, you will need to remember to put them back in when you are done using the VR headset.

Do Vr Controllers Take Batteries?

Do VR controllers take batteries?

Yes, the controllers for all major VR headsets use AA batteries by default. However, there are some aftermarket options that allow you to use rechargeable batteries. The Anker Charging dock is one such option that allows you to charge the Quest 2 and rechargeable batteries in the controllers simultaneously.

An additional, The controllers for the Quest 2 use disposable AA batteries by default. This means that when the batteries are depleted, you can replace them. The Anker Charging dock allows you to charge the Quest 2 and the batteries in the controllers at the same time.

Can Oculus Batteries Be Replaced?

The Oculus Quest 2 is a great VR headset, but it has one major downside: the controllers don’t have in-built batteries. This means that you’ll have to replace or charge the batteries once they run out of juice.

There are a few different options for charging the Quest 2 controllers. You can use a standard AA battery charger, or you can buy a Quest 2 battery pack that will charge the controllers while they’re in the headset.

The battery pack is the more expensive option, but it’s definitely the more convenient option. If you’re going to be using your Quest 2 a lot, then it’s worth the investment.

Once you’ve got your Quest 2 controllers charged up, you’ll be able to enjoy all the great features of the headset. Just make sure you keep an eye on the battery life so you don’t run out of juice in the middle of a VR session!

Moreover, The Quest 2 controllers don’t have in-built batteries, so you’ll need to replace or charge them via battery chargers once they run out of power.

Final Word

In conclusion, changing the battery in your VR controller is a relatively easy process. You will need to remove the cover of the controller, locate the battery compartment, and then remove and replace the batteries. Be sure to check that the new batteries are properly seated and the cover is securely in place before using the controller again.

Related Post: