How To Change Battery In Vw Key Fob?

As an Amazon Associate, I Earn From Qualifying Purchases.

Last Updated on September 15, 2022 by Ellis Gibson (B.Sc. in Mechanical Engineering)

If you’re like most people, you depend on your car to get you where you need to go. That’s why it’s important to know how to change the battery in your VW key fob. A key fob that’s not working can leave you stranded, so it’s good to know how to change the battery yourself. This article will show you how to change the battery in your VW key fob, so you can get back on the road.

So, how to change battery in vw key fob?

If your VW key fob starts to act up, one of the first things you should check is the battery. Here’s how to change the battery in a VW key fob.

1. Start by taking off the key ring.

2. Use a small screwdriver or paperclip to pry open the back of the key fob.

3. Take out the old battery and insert the new one, making sure the positive side is facing up.

4. Snap the back of the key fob closed and reattach the key ring.

Let’s dig into it and see where it takes us.

Step By Step Process On: How To Change Battery In Vw Key Fob?

Here I will explain you step by step process of how to change battery in vw key fob? let’s see how to change battery in vw key fob.

REQUIRED TOOLS:

  1. Flathead screwdriver or knife
  2. New battery (Panasonic CR2025)

Step-01:

First, locate the small button on your key fob. This is usually located on the side or back of the fob.

Step-02:

Press the button to release the key from the fob.

Step-03:

Using a small flathead screwdriver or knife, pry open the back of the key fob to reveal the battery.

Step-04:

Note the type of battery that is in your key fob. For this particular key fob, you will need a Panasonic CR2025 battery.

Step-05:

Remove the old battery from the key fob and replace it with the new battery, making sure that the positive side is facing up.

Step-06:

Snap the back of the key fob closed and test the key to make sure that it is working properly.

If you wanted to watch a youtube video that shows you how to change battery in vw key fob? I have included a video below:

How Do You Change The Battery In A Volkswagen Key Fob?

If you’re like most people, you probably don’t think much about the battery in your key fob. But if you’ve ever been stranded with a dead key fob, you know how frustrating it can be. Here’s a quick and easy tutorial on how to change the battery in your Volkswagen key fob.

First, eject the emergency key by pushing the button on your VW key fob. Then, use your fingers to create a space between the base and the lid of the key fob. Next, pry them apart with your screwdriver. Finally, take out the old battery before inserting a new one in its place.

That’s all there is to it! With a new battery in your key fob, you can rest assured that you’ll never be stranded with a dead key fob again.

An additional, If your VW key fob isn’t working properly, you may need to replace the battery. Here’s how:

First, eject the emergency key by pushing the button on your key fob. Then, use a screwdriver to pry apart the seam between the base and lid of the key fob. Once you’ve done that, you can remove the old battery and insert a new one in its place.

How Do You Change The Battery In A 2020 Vw Key Fob?

If you find yourself in need of changing the battery in your 2020 VW Key Fob, don’t worry, it’s a quick and easy process! Here’s what you’ll need to do:

1. Start by locating the release button on the back of the key fob. This is usually located near the bottom of the fob.

2. Use a small tool, like a paperclip, to press and hold the release button.

3. While holding the release button, use your other hand to twist the back cover of the key fob open.

4. Once the back cover is open, you’ll see the battery inside. Carefully remove the old battery and replace it with a new one.

5. Once the new battery is in place, reattach the back cover of the key fob and you’re all set!

What Battery Goes In A Vw Key?

Volkswagen car keys have come a long way in recent years, but if you drive an older model VW, chances are you still have a key fob that looks like a simple car key. If that’s the case, you’re probably wondering what kind of battery goes in a VW key.

The answer is that most older VW keys use a CR1632 battery, while most newer models use a CR2032 battery. If you’re not sure which battery you need, consult your VW’s owner’s manual or contact a VW dealership.

Once you know which battery you need, replacing it is a relatively simple process. Just remove the old battery from your key fob and insert the new one, making sure that the positive and negative terminals are properly aligned.

If you find yourself in need of a new VW key battery, don’t worry – it’s a relatively inexpensive and easy fix. Just be sure to get the right battery for your particular key fob, and you’ll be back on the road in no time.

Moreover, If you drive a Volkswagen car that is older, the key might just look like a simple key. However, if the key is a fob that looks like a small pod with buttons, then you likely need a CR2032 Battery. Those types of keys are mostly used after 1999. There is also an emergency key that can be used as a backup.

How Do You Change The Battery In A 2017 Vw Passat Key Fob?

If you’re like most people, you probably don’t think about your car key fob until it’s time to change the battery. And then you’re left wondering, how do you change the battery in a 2017 VW Passat key fob?

Fortunately, it’s not as difficult as you might think. Here’s a step-by-step guide to changing the battery in your Passat’s key fob:

1. Start by removing the key fob from your key ring. Most key fobs have a small release button that you can press to detach them from the key ring.

2. Once the key fob is detached from the key ring, take a look at the back of it. You should see a small screw or tab that you can use to open the key fob.

3. Use a small screwdriver or a knife to pry open the key fob. Be careful not to damage the key fob as you do this.

4. Once the key fob is open, you should see the battery inside. It will be clearly marked with a plus sign (+) and a minus sign (-).

5. Use a small screwdriver to remove the old battery from the key fob.

6. Insert the new battery into the key fob, making sure that the plus sign (+) is facing up.

7. Close the key fob and screw or snap it shut.

8. Reattach the key fob to your key ring and you’re all set!

Changing the battery in your Passat’s key fob is a simple process that anyone can do. Just follow the steps above and you’ll have a new battery in no time.

Final Word

Thanks for reading! Changing the battery in your VW key fob is easy and only takes a few minutes. Be sure to have a new battery on hand before you begin. With a few simple steps, you’ll have your key fob working like new again.

Related Post:

Share
Tweet
Pin
Share