Change Battery In Women's Invicta Watch: Step-by-Step Guide For Pro Diver & Angel Models [Updated On- 2025]

To change the battery in a women’s Invicta watch, like the Invicta Angel or Invicta Pro Diver, use an EZ Watch Repair Kit, which includes a small screwdriver and tweezers. Remove the screws to open the watch back. Replace the old battery with a Renata 371 battery. Clean the inside if necessary, then secure the back.

Use the case opener to gently pry off the back cover. Be cautious to avoid damaging the watch. Once the back cover is removed, locate the battery. Note its position carefully, as this will help during replacement. Use the small screwdriver to remove the battery holder clip. Lift out the old battery and insert the new one, ensuring it fits snugly in the same orientation as the old one.

Reattach the battery holder clip, pressing it down securely. Finally, place the back cover onto the watch and press it back into place. Ensure it seals tightly to maintain water resistance.

After changing the battery in your women’s Invicta watch, test its functionality. If everything works, you’re ready to enjoy your timepiece again. Next, we will discuss tips for maintaining your watch to prolong its lifespan.

# Table of Contents

What Tools Do You Need to Change the Battery in Your Women’s Invicta Watch?

To change the battery in your Women’s Invicta Watch, you need specific tools designed for watch maintenance.

Watch case opener
Screwdriver set (micro)
Tweezers (non-magnetic)
Soft cloth or mat
Replacement battery (check watch model)
Magnifying glass (optional)

Having the right tools for battery replacement is crucial to avoid damage. Each tool serves a distinct purpose in ensuring a smooth battery change process.

Watch Case Opener:
The watch case opener allows you to carefully open the back of your watch without scratching or damaging it. There are various types, including case knives and case-lever openers, each suited for different watch designs. Use a case opener that fits your Invicta model.
Screwdriver Set (Micro):
A micro screwdriver set is essential for loosening and removing tiny screws found in many watch cases. Make sure to select a screwdriver that fits properly to avoid stripping the screws. This tool is vital for models where the back is secured with screws rather than clips.
Tweezers (Non-Magnetic):
Non-magnetic tweezers help handle the small components of the watch without causing damage or interference with any electronic parts. Precision is key, especially when positioning the new battery or removing delicate components.
Soft Cloth or Mat:
Using a soft cloth or a dedicated watchmaker’s mat provides a safe surface to work on. It helps prevent scratches on your watch and keeps components organized. This is particularly important to avoid losing small parts.
Replacement Battery:
Having the correct replacement battery is crucial. Consult the manual for your specific Invicta model to find the battery type required. Different models may use different battery sizes, so double-checking is essential.
Magnifying Glass (Optional):
A magnifying glass can help you see tiny components more clearly, making it easier to handle delicate parts during the battery replacement. While not essential, it can enhance precision, especially for those not used to working with small items.

By using these tools effectively, you can change your Women’s Invicta Watch battery while minimizing the risk of damaging it or any internal components. Follow the instructions step-by-step, and if necessary, consult additional resources or watch repair guides for more detail.

How Can You Identify the Correct Battery Type for Your Women’s Invicta Watch?

You can identify the correct battery type for your women’s Invicta watch by checking the user manual, looking for engraved model numbers, or using a battery cross-reference tool online.

User manual: The user manual provided with your watch usually specifies the battery type required. It will provide information on the correct battery size and part number. If you don’t have the manual, it may be available online on the official Invicta website.

Model number: Every Invicta watch has a unique model number engraved on the case back. This number can help identify the correct battery type. You can search online using this model number to find detailed specifications, including battery type.

Online battery cross-reference tools: Various websites and watch repair services offer cross-reference tools. You can enter either the watch model or current battery number to find corresponding battery types. This method ensures that you select the correct battery for your specific watch model.

Local jeweler or watch repair shop: If you’re unsure, visiting a local jeweler or watch repair shop can help. Skilled professionals can quickly determine the right battery and even replace it for you. They often have experience with different watch brands and models, including Invicta.

Battery size: Common battery types for Invicta watches include CR2016, SR626SW, and others. Knowing the size will help when searching for replacement batteries. Always verify the battery’s specifications before purchasing to ensure compatibility with your watch.

How Do You Safely Open the Case of Your Women’s Invicta Watch?

To safely open the case of your women’s Invicta watch, you need to gather the right tools, protect the watch, and follow specific steps to avoid damage.

Gather the right tools. You will need:
– A case opener, which is designed to safely pry open watch cases.
– A soft cloth to prevent scratches.
– A small screwdriver for additional screws, if present.
Protect the watch. Lay the soft cloth on a flat surface. Place the watch face down on the cloth. This helps prevent scratches on the watch face and protects it while you work.
Locate the case back. Observe the back of the watch. Identify whether it has a screw-down case back or a snap-back design.
Open the case.
– If it’s a screw-down case back, carefully insert the case opener into the slots around the edge. Gently twist or lift to unscrew the back.
– For a snap-back case, find a small groove along the edge. Carefully insert the case opener and pry the back off gently.
Remove the case back. Once opened, carefully lift off the case back without forcing it. Be cautious to avoid damaging any seals or components inside.

By following these steps, you can safely open the case of your women’s Invicta watch, ensuring you avoid potential damage to the watch and its components.

What Steps Should You Follow to Remove the Old Battery from Your Women’s Invicta Watch?

To remove the old battery from your women’s Invicta watch, follow these steps:

Gather the necessary tools (case opener, tweezers, new battery).
Remove the watch band or strap.
Open the case back.
Take out the old battery.
Insert the new battery.
Close the case back.
Reattach the watch band or strap.

Given that some watch models may differ in design, it’s important to consider alternative views on how to handle battery replacement. Some may suggest visiting a professional jeweler to avoid potential damage, while others advocate for DIY methods to save costs.

Now, let’s explore each step in detail.

Gather the necessary tools: To change the battery in your women’s Invicta watch, gather essential tools like a case opener, tweezers, and the new battery. A case opener is a small tool designed to pry open the watch back safely. Tweezers help you handle the small battery without risking damage to the watch.
Remove the watch band or strap: Before starting the battery replacement, remove the watch band or strap if your watch model allows for this. Doing so provides easier access to the case back and prevents damage to the strap during the process.
Open the case back: Use the case opener tool to gently pry open the case back of your Invicta watch. Some models may have screws or tabs, while others feature a snap-on back. Follow the specific instructions for your model to avoid damaging the case.
Take out the old battery: Once the case back is open, locate the old battery. Use tweezers to carefully lift the battery out of its slot. Take note of the battery’s orientation, as the new battery must be placed in the same direction.
Insert the new battery: Place the new battery into the slot, ensuring it sits securely and correctly oriented. Make sure the battery is fully pressed into position for proper connection.
Close the case back: After inserting the new battery, carefully replace the case back of the watch. Ensure the back is sealed properly to maintain the watch’s water resistance and overall functionality.
Reattach the watch band or strap: Finally, if you removed the watch band or strap, reattach it securely. Make sure the strap is fastened correctly for comfort and proper wear.

Following these steps will ensure a successful battery replacement for your women’s Invicta watch. Always refer to your watch’s manual for model-specific instructions for the best results.

How Can You Properly Install the New Battery in Your Women’s Invicta Watch?

To properly install a new battery in your Women’s Invicta watch, follow these essential steps: gather necessary tools, remove the case back, replace the old battery with a new one, and reattach the case back securely.

Gather necessary tools: You will need a case back wrench, a small screwdriver, and a new battery compatible with your watch model. Tools like a soft cloth can protect the watch from scratches during the replacement.
Remove the case back: Use the case back wrench to gently twist and open the back of the watch. Be careful to avoid damaging the case. If your watch has screws, use the small screwdriver to remove them first, then lift the case back off.
Replace the old battery: Take out the existing battery using a pair of tweezers. Note its orientation, as it is crucial to place the new battery in the same direction. Insert the new battery securely in its place, ensuring it fits snugly.
Reattach the case back securely: Once the new battery is installed, align the case back correctly. If necessary, screw it back in place or press it down until it clicks, depending on your watch model. Ensure all parts fit properly to maintain water resistance.

Following these steps will help you successfully change your watch battery, restoring its functionality while preserving its aesthetic integrity. Proper battery installation is vital to ensure the longevity of your watch and its accurate performance.

How Do You Close the Case Back Securely After Battery Replacement?

To close the case back securely after replacing a battery, follow these steps to ensure a proper seal and prevent damage to the watch.

First, align the case back with the watch casing. Then, gently press it down from the outer edges while ensuring it is fully seated. Finally, use a case-back press tool or a flat surface to secure it evenly. This method helps maintain water resistance and ensures that the internal mechanisms are protected.

Align the case back: Ensure that the notches or grooves on the case back match with those of the watch casing. Proper alignment prevents any gaps that could lead to water ingress or dust accumulation.
Press down gently: Start pressing down on the case back from the outer edges. This distributes the pressure evenly and helps avoid damaging the internal components.
Use a case-back press tool: If available, a case-back press tool can provide consistent pressure. Place the tool on the case back, and apply pressure evenly until you hear a slight click, indicating it is secure.
Inspect the seal: After closing the case back, inspect the perimeter for any visible gaps. An acceptable seal ensures that the watch remains resistant to moisture and dust.
Test the functionality: Finally, check that the watch functions correctly after sealing. Adjust the time if necessary to confirm the battery replacement was successful.

Taking care to close the case back properly enhances the longevity and performance of the watch and protects it from external elements.

What Common Mistakes Should You Avoid When Changing the Battery?

When changing a battery in a watch, avoid common mistakes to ensure proper function and maintain the watch’s integrity.

Not Using the Right Tools
Forgetting to Clean the Inside
Ignoring the Gasket Replacement
Failing to Note Battery Orientation
Not Testing the Watch After Replacement

To navigate these common mistakes effectively, it’s crucial to understand each aspect of the battery replacement process.

Not Using the Right Tools: Failing to use the appropriate tools can lead to damaging the watch casing or mechanism. Tools like a case opener, tweezers, and a small flathead screwdriver are essential for safely changing the battery.
Forgetting to Clean the Inside: Dust and debris can accumulate inside the watch casing over time. When changing the battery, it is important to carefully clean the internal components to prevent potential damage or malfunction.
Ignoring the Gasket Replacement: The gasket helps maintain the watch’s water resistance. If the gasket is not replaced or properly adjusted during battery changes, the watch may become susceptible to moisture damage, which can impair its function.
Failing to Note Battery Orientation: Installing the battery incorrectly can prevent the watch from working. It’s necessary to note the battery orientation before removing the old battery to ensure correct installation of the new one.
Not Testing the Watch After Replacement: After changing the battery, always test the watch to confirm function. This step ensures that the battery is properly installed and that the watch operates as expected.

By adhering to these guidelines, you can successfully change a watch battery while preventing potential issues.

How Can You Maintain the Water Resistance of Your Women’s Invicta Watch After Changing the Battery?

To maintain the water resistance of your women’s Invicta watch after changing the battery, ensure proper resealing and testing of the watch.

First, perform resealing correctly. After replacing the battery, the watch’s case must be resealed to prevent water from entering. This can be done by following these steps:

Inspect the gasket: The gasket is a rubber or silicone ring that helps create a waterproof seal. Ensure that it is in good condition, free from cracks, and is properly seated in its groove.
Lubricate the gasket: Apply a small amount of silicone grease to the gasket. This helps create a better seal and prevents the gasket from drying out over time.
Close the case properly: Ensure the watch case back is securely tightened. Use the appropriate tool to avoid damaging the threads.

Next, perform a water resistance test. After resealing, it is essential to verify that your watch can withstand water pressure. You can follow these steps:

Use a pressure tester: Many jewelers or watch repair shops have equipment to test the water resistance of watches. This device measures how well the watch can hold up under water pressure.
Conduct a simple water test: Submerge the watch in water for a short period. If it remains dry inside after the test, it indicates the seal is intact.

Regular maintenance helps preserve the water resistance. Over time, even watches that are designed to be water-resistant can experience wear and tear.

Replace gaskets every few years: Gaskets can deteriorate due to age and exposure to water. Regular replacement can help maintain effective seals.
Avoid exposing your watch to extreme conditions: Limit the watch exposure to hot water, steam, or extreme temperature changes, as these conditions can weaken the seals.
Store your watch properly: Keep your watch in a cool, dry place when not in use. This helps preserve its components and maintains water resistance.

By following these steps, you can effectively maintain the water resistance of your women’s Invicta watch after battery changes.

Related Post: