How To Change Battery In Wyze Motion Sensor?

As an Amazon Associate, I Earn From Qualifying Purchases.

Last Updated on September 15, 2022 by Ellis Gibson (B.Sc. in Mechanical Engineering)

If you’re like me, you’re probably wondering how to change the battery in your Wyze Motion Sensor. It’s a common problem, but don’t worry, I’m here to help. In this article, I’ll show you how to change the battery in your Wyze Motion Sensor in just a few simple steps.

So, how to change battery in wyze motion sensor?

The Wyze Motion Sensor uses two CR2032 batteries for power. To change the batteries:

1. Remove the Wyze Motion Sensor from its mount.

2. Flip open the battery door on the bottom of the sensor.

3. Remove the old batteries and insert new ones, making sure to match the (+) and (-) symbols.

4. Close the battery door and re-attach the sensor to its mount.

Let’s dig into it and see where it takes us.

Step By Step Process On: How To Change Battery In Wyze Motion Sensor?

Here I will explain you step by step process of how to change battery in wyze motion sensor? let’s see how to change battery in wyze motion sensor.

REQUIRED TOOLS:

  1. Phillips head screwdriver
  2. Two AA batteries

Step-01:

First and foremost, you’ll need to grab a Phillips head screwdriver. With that in hand, locate the Wise Motion Sensor Version 2 (it’s all black and says “Wise” on the front). There will be two small screws near the bottom of the device – go ahead and unscrew those.

Step-02:

With the screws removed, the top portion of the Wise Motion Sensor Version 2 will come right off. Set that aside for now, as we’ll need to access the batteries inside.

Step-03:

You should now see two AA batteries inside the Wise Motion Sensor Version 2. Go ahead and remove those, being careful not to lose the small plastic tab that’s attached to the positive end of one of the batteries.

Step-04:

With the old batteries out, it’s time to insert the new ones. Be sure to line up the positive and negative ends correctly, then push the batteries back into place.

Step-05:

Once the new batteries are in, go ahead and put the top portion of the Wise Motion Sensor Version 2 back on. Screw it in place using the two screws you removed earlier.

Step-06:

That’s it! Your Wise Motion Sensor Version 2 should now be good to go. Test it out by walking in front of it, and you should see the lights turn on just like before.

If you wanted to watch a youtube video that shows you how to change battery in wyze motion sensor? I have included a video below:

How Do I Change A Wyze Sensor Battery?

If your Wyze Sensor is starting to run low on battery, don’t worry – changing the battery is a quick and easy process! Here’s how to do it:

1. Start by removing the back cover of the Wyze Sensor. You can do this by gently pushing on the top or bottom of the cover until it pops off.

2. Once the back cover is off, you’ll see the battery compartment. Inside, there will be a small tab that you need to push in order to release the battery.

3. Before you remove the old battery, make note of which way it is facing. This is important, as you’ll need to insert the new battery in the same direction.

4. Once the old battery is out, simply insert the new one in its place. Make sure that it is facing the same way as the old battery, then close the back cover.

And that’s it! Your Wyze Sensor will now have a fresh battery, and should be good to go for another few months.

How Do You Change A Motion Sensor Battery?

If you have a motion sensor that is running on batteries, you will eventually need to change them. Here is a quick guide on how to do that:

1. Locate the motion sensor. This is usually easy to do as they are often placed in strategic locations.

2. Once you have found the motion sensor, you will need to find the battery compartment. This is usually located on the back or bottom of the sensor.

3. Open the battery compartment and remove the old batteries.

4. Insert new batteries into the compartment, making sure they are properly aligned.

5. Close the battery compartment and test the motion sensor to see if it is working properly.

What Batteries Do Wyze Sensors Use?

Wyze sensors use four AAA batteries. According to the company, these batteries should last for six or more months. If you need to replace the batteries, you can do so by opening the scale’s back panel.

Besides this, If your Wyze Scale’s batteries are running low, you can replace them by opening the back panel and inserting four AAA batteries. With new batteries, your Wyze Scale should work for at least six months.

How Long Does Wyze Sensor Battery Last?

The WyzeSensor is a battery-powered, wireless sensor that Wyze Labs designed to monitor things like movement, temperature, and light. The WyzeSensor has an expected battery life of 12 months with normal use. However, based on environmental factors and use, your mileage may vary.

Some of the things that can affect the WyzeSensor’s battery life include:

– The WyzeSensor’s location: If the WyzeSensor is placed in an area with a lot of activity, it will use battery power more quickly than if it were in a location with less activity.

– The WyzeSensor’s environment: If the WyzeSensor is placed in a hot or cold environment, its battery life will be shorter than if it were in a moderate environment.

– The WyzeSensor’s use: If the WyzeSensor is used frequently, its battery life will be shorter than if it were used less often.

If you find that your WyzeSensor’s battery life is shorter than expected, there are a few things you can do to help extend its life:

– Place the WyzeSensor in a location with less activity.

– Place the WyzeSensor in a moderate environment.

– Use the WyzeSensor less frequently.

An additional, The sensors in the device have a battery life of 12 months. However, depending on how often the device is used and other environmental factors, the battery life may be shorter or longer.

Final Word

Thanks for reading! We hope this article was helpful in explaining how to change the battery in your Wyze Motion Sensor. As always, if you have any questions or comments, feel free to reach out to us at support@wyze.com.

Looking for more Wyze content? Check out our blog for more helpful articles, or follow us on social media for the latest Wyze news!

Related Post:

Share
Tweet
Pin
Share