How To Change Battery In Xena Disc Lock?

As an Amazon Associate, I Earn From Qualifying Purchases.

Last Updated on September 15, 2022 by Ellis Gibson (B.Sc. in Mechanical Engineering)

If you’re like me, you want to keep your motorcycle safe. That’s why you’ve invested in a XENA disc-lock alarm. But what happens when the battery starts to die? In this article, I’ll show you how to change the battery in your XENA disc-lock alarm, so you can keep your motorcycle safe and sound.

So, how to change battery in xena disc lock?

To change the battery in a XENA disc lock alarm, first remove the back cover of the alarm using a Phillips head screwdriver. Next, remove the old battery from the alarm and insert the new battery, making sure that the positive and negative ends are facing the correct way. Finally, screw the back cover back on and test the alarm to make sure it is working properly.

Let’s dig into it and see what’s inside.

Step By Step Process On: How To Change Battery In Xena Disc Lock?

Here I will explain you step by step process of how to change battery in xena disc lock? let’s see how to change battery in xena disc lock.

REQUIRED TOOLS:

  1. Allen Wrench
  2. Socket Head Screwdriver
  3. New CR2 Camera Type Battery

Step-01:

If you’re like most people, the thought of changing a battery in a disc lock alarm may seem daunting. But fear not! With a little bit of know-how, you can easily change the battery in your Xena disc lock alarm.

Step-02:

To begin, you’ll need to gather a few tools. First, you’ll need an Allen wrench and a socket head screwdriver. These will be used to remove the alarm module from the lock.

Next, you’ll need a new CR2 camera type battery. This is the type of battery that is used in most disc lock alarms.

Step-03:

Now that you have all the necessary tools, it’s time to get started. Begin by opening the disc lock. Once the lock is open, you’ll see a small button in the center. This button is used to release the alarm module from the lock.

Pressing the button will cause the module to pop out. Be careful not to lose the small rubber gasket that is located on the back of the module. This gasket helps to make the module waterproof.

Step-04:

With the module removed, it’s now time to change the battery. Simply remove the old battery and replace it with the new one. Be sure to orient the new battery so that the positive and negative terminals are in the correct position.

Once the new battery is in place, you can reassemble the alarm module. Be sure to line up the small mirror that is located in the module with the slot in the lock. This mirror is used by the sensor to arm the alarm only when the module is correctly in place.

Screw the module back into the lock using the Allen wrench and socket head screwdriver. Be sure not to overtighten the screws.

Step-05:

Once the module is back in place, you can replace the cover on the lock. And that’s it! You’ve successfully changed the battery in your Xena disc lock alarm.

If you wanted to watch a youtube video that shows you how to change battery in xena disc lock? I have included a video below:

How Do I Change The Battery In A Disk Lock?

If you’re like most people, you probably don’t know how to change the battery in a disk lock. Here’s a quick and easy guide on how to do it.

First, you’ll need to find the right type of battery for your lock. Most disk locks use CR2032 batteries, which are widely available.

Once you have the right battery, simply remove the old one and insert the new one in its place. Make sure that the new battery is inserted in the correct direction, as indicated by the + and – symbols on the battery.

That’s it! You’ve now successfully changed the battery in your disk lock.

How Do I Lock My Xena Disc With Alarm?

If you’re looking to lock your Xena disc with an alarm, there are a few things you’ll need to do. First, you’ll need to find a good alarm system that will fit your needs. There are a variety of alarm systems on the market, so you’ll need to do some research to find the one that’s right for you.

Once you’ve found an alarm system, you’ll need to install it on your Xena disc. This can be a bit tricky, so you’ll need to follow the instructions carefully. Once the alarm system is installed, you’ll need to set it up so that it’s activated when you want it to be.

Once the alarm system is set up, you’ll need to test it to make sure it’s working properly. You can do this by locking your Xena disc with the alarm system and then trying to open it. If the alarm goes off, then you know it’s working properly.

If you’re looking to lock your Xena disc with an alarm, there are a few things you’ll need to do. First, you’ll need to find a good alarm system that will fit your needs. There are a variety of alarm systems on the market, so you’ll need to do some research to find the one that’s right for you.

Once you’ve found an alarm system, you’ll need to install it on your Xena disc. This can be a bit tricky, so you’ll need to follow the instructions carefully. Once the alarm system is installed, you’ll need to set it up so that it’s activated when you want it to be.

Once the alarm system is set up, you’ll need to test it to make sure it’s working properly. You can do this by locking your Xena disc with the alarm system and then trying to open it. If the alarm goes off, then you know it’s working properly.

How Do I Know If My Xena Disc Lock Is Still Under Warranty?

If you’re not sure if your Xena disc lock is still under warranty, the best way to find out is to contact the company directly. You can find their contact information on their website or in the owner’s manual.

Who Do I Contact If I Have Questions About Changing The Batteries In My Xena Disc Lock?

If you have questions about changing the batteries in your Xena disc lock, you can contact Xena Security.

Final Word

The Xena disc-lock alarm is a great way to keep your motorcycle secure. The alarm is triggered when someone tries to remove the disc-lock without the key, and it emits a loud siren that will deter would-be thieves. The battery in the disc-lock alarm needs to be changed every few years to ensure that the alarm will continue to work properly. Here’s how to change the battery in your Xena disc-lock alarm:

1. Remove the disc-lock from the motorcycle.

2. Use a coin or a small screwdriver to unscrew the battery cover on the back of the disc-lock.

3. Remove the old battery and insert a new CR2032 battery, making sure that the “+” side is facing up.

4. Screw the battery cover back on and re-attach the disc-lock to the motorcycle.

That’s all there is to it! Changing the battery in your Xena disc-lock alarm is a quick and easy process that will ensure that your alarm continues to work properly.

Related Post:

Share
Tweet
Pin
Share