How To Change Battery In Zurn Faucet?

As an Amazon Associate, I Earn From Qualifying Purchases.

Last Updated on September 15, 2022 by Ellis Gibson (B.Sc. in Mechanical Engineering)

If your faucet is leaking or not working as efficiently as it used to, it may be time to change the battery. This can be a quick and easy fix that you can do yourself without having to call a plumber. In this article, we’ll show you how to change the battery in your Zurn faucet.

So, how to change battery in zurn faucet?

1. Locate the screws that hold the zurn faucet handle in place. Unscrew these screws with a Phillips head screwdriver.

2. Remove the handle from the zurn faucet.

3. Locate the battery compartment on the zurn faucet. This is usually located under the handle.

4. Remove the old batteries from the battery compartment and dispose of them properly.

5. Insert new batteries into the battery compartment. Make sure that the batteries are inserted correctly.

6. Replace the handle on the zurn faucet and screw it back into place.

7. Turn on the water to test the zurn faucet.

Let’s dig into it and see where it takes us.

Step By Step Process On: How To Change Battery In Zurn Faucet?

Here I will explain you step by step process of how to change battery in zurn faucet? let’s see how to change battery in zurn faucet.

REQUIRED TOOLS:

  1. Phillips screwdriver
  2. Flat-head screwdriver
  3. Soft cloth
  4. Replacement batteries (if necessary)
  5. Power supply cable (if necessary)
  6. Pliers (if necessary)

Step-01: Test your faucet by placing your hand in front of the sensor for a few seconds. If you hear the solenoid click, it means that the electronics are most likely working properly and you probably have a water supply issue.

Step-02: If the solenoid does not click in response to your hand after a few tests, check for water supply issues. Make sure that both water supply valves are in the fully open position. If the problem persists, locate the l filter below the electronics module and unscrew the bottom cap of the l filter to access the mesh screen filter. Inspect and clean the filter as needed, then reassemble the l-filter.

Step-03: If the water supply issue is still not resolved, it is likely that the solenoid valve is obstructed or inoperative. First, turn off the water supply valves. Disconnect and remove the electronics module from the spout shank and disconnect the l-filter and water lines so you can work above deck. Remove the solenoid assembly from the electronics module by removing the four screws.

Step-04: Inside the solenoid assembly, you will find the diaphragm, the plunger, and spring. Inspect and clean all the components as needed to remove all debris. Reassemble the clean solenoid assembly and reinstall on the electronics module.

Step-05: Reinstall the electronics module, l-filter, and water lines. Turn on the water supply valves and test the faucet.

If the faucet still does not operate properly, there may be an issue with the electronics. Check the batteries first, replacing them if necessary. If the batteries are not the issue, check the power supply cable for any loose or damaged connections. If the power supply cable is damaged, call Xern customer care for assistance. Finally, if the sensor lens is dirty or scratched, clean it with a soft cloth.

If you wanted to watch a youtube video that shows you how to change battery in zurn faucet? I have included a video below:

How Do I Change The Battery In My Sensor Faucet?

If your faucet has a sensor, there is a battery inside that needs to be changed every few months. The battery is usually located in the handle of the faucet. To change it, you will need a Phillips head screwdriver.

1. Unscrew the handle of the faucet.

2. Remove the battery cover.

3. Take out the old battery and insert the new one.

4. Replace the battery cover and screw the handle back on.

Where Are The Batteries On A Touch Faucet?

This is a question that we get asked a lot, and it can be a bit tricky to answer. The thing is, there are a lot of different types of touch faucets out there, and each one has its own battery location. So, in order to help you out, we’ve put together a quick guide on where to find the batteries on a touch faucet.

For most touch faucets, the batteries are located in the base of the faucet. To access them, you’ll need to remove the cover plate from the base of the faucet. Once you’ve done that, you should see a small compartment that houses the batteries.

However, there are some touch faucets that have the batteries located in the handle. To access the batteries in this type of faucet, you’ll need to remove the handle from the faucet. Once you’ve done that, you should see a small compartment that houses the batteries.

If you’re still having trouble finding the batteries, consult the owner’s manual for your specific touch faucet. The manual should have detailed instructions on where to find the batteries.

How Do You Reset A Zurn Sensor Faucet?

If you’re asking yourself how to reset a Zurn sensor faucet, you’re not alone. Many people have questions about how to properly reset their Zurn sensor faucets. Here’s a quick guide on how to do it:

First, turn off the water supply to the faucet. Next, remove the battery cover and take out the batteries. Once the batteries are removed, press and hold the reset button for three seconds. Finally, replace the batteries and turn on the water supply.

If you have any further questions about how to reset a Zurn sensor faucet, feel free to contact our customer service team. We’re always happy to help!

Why Did My Motion Sensor Faucet Stop Working?

Why did my motion sensor faucet stop working?

There could be a few reasons why your motion sensor faucet has stopped working, but the most likely culprit is a faulty sensor. When the sensor is damaged or malfunctioning, it can cause the faucet to use up battery power quickly, which will eventually lead to the faucet shutting off.

To fix this problem, you’ll need to replace the sensor. This is a relatively easy task, but it will require you to disassemble the faucet. Once you’ve replaced the sensor, your faucet should be back to working properly.

Along with, The batteries in your faucet may run out quickly if the sensor is faulty. This is because the faulty sensor causes the faucet to use up more power, which drains the batteries. You can fix this problem by replacing the sensor. If the sensor is working properly, the batteries should last for several years. To replace the sensor, you will need to take the faucet apart.

Final Word

That’s all there is to it! Now you know how to change the battery in your Zurn faucet. We hope this tutorial was helpful. If you have any questions or comments, please feel free to leave them below. Thanks for reading!

Related Post:

Share
Tweet
Pin
Share