How To Change Battery Jeep Cherokee Key Fob?

As an Amazon Associate, I Earn From Qualifying Purchases.

Last Updated on September 15, 2022 by Ellis Gibson (B.Sc. in Mechanical Engineering)

If your Jeep Cherokee key fob battery starts to die, don’t worry – changing it is a quick and easy process. All you need is a small flat-head screwdriver and a new CR2032 battery. To start, press down lightly on the top of the screwdriver to force the two key fob segments apart at the seam. Make sure you don’t use a twisting action – this could damage the plastic. Next, remove the old battery from its housing and insert the new CR2032 battery, making sure the negative side is down. That’s it! You’ve now successfully changed the battery in your Jeep Cherokee key fob.

So, how to change battery jeep cherokee key fob?

To change the battery in a Jeep Cherokee key fob, use a small screwdriver to pry the two halves of the fob apart at the seam. Be careful not to twist or damage the plastic. Remove the old battery from its housing and insert the new CR2032 battery, making sure the negative side is down.

Let’s dig into it and see if we can figure it out.

Step By Step Process On: How To Change Battery Jeep Cherokee Key Fob?

Here I will explain you step by step process of how to change battery jeep cherokee key fob? let’s see how to change battery jeep cherokee key fob.

REQUIRED TOOLS:

  1. A very small and slim screwdriver
  2. A new battery

Step-01: Take out your Jeep Cherokee key fob key by sliding down the side part.

Step-02: With a very small and slim screwdriver, pry open the side of the key fob to reveal the battery.

Step-03: Take out the old battery and replace it with a new one.

Step-04: Put the soft piece back in place and cover the key fob back up.

That’s it! You’ve now successfully replaced the battery in your Jeep Cherokee key fob.

If you wanted to watch a youtube video that shows you how to change battery jeep cherokee key fob? I have included a video below:

What Kind Of Battery Does A Jeep Cherokee Key Fob Take?

A jeep cherokee key fob takes a lithium CR2032 battery. This type of battery is also known as an “Energizer 2032” battery. There are six of them in a pack. They are used in watches and other small electronic devices.

Along with, Energizer 2032 Batteries are lithium CR2032 watch batteries that come in a pack of six. They are designed for long-lasting performance and are ideal for watches, calculators, and other electronic devices.

How Do You Change The Battery In A 2017 Jeep Cherokee Key Fob?

If you’re like most people, you probably don’t think about your car key fob until it stops working. And then you’re left scrambling to figure out how to change the battery. If you have a 2017 Jeep Cherokee, you’re in luck. Here’s a quick and easy guide to changing the battery in your Jeep Cherokee key fob.

First, you’ll need to locate the battery cover. On the back of the key fob, there is a small tab that says “battery cover.” Pry this open with a flathead screwdriver or a similar tool.

Once the battery cover is open, you’ll see the battery. It will be a small, round, silver coin-like battery. Gently pry this out with your fingers or a small flathead screwdriver.

Now, take your new battery and insert it into the key fob, making sure that the positive ( + ) side is facing up. Once the new battery is in place, snap the battery cover back into place.

That’s it! You’ve now successfully changed the battery in your 2017 Jeep Cherokee key fob.

How Do You Change The Battery In A 2019 Jeep Key Fob?

Assuming you would like a blog titled “How to change the battery in a 2019 Jeep Key Fob”, here you go:

“How to change the battery in a 2019 Jeep Key Fob”

If you’re like most people, you probably don’t think about your car key fob until it stops working. Then you’re scrambling to figure out how to change the battery. Luckily, it’s not too difficult to change the battery in a Jeep key fob. Here’s a quick guide on how to do it.

First, you’ll need to find a small Phillips head screwdriver. Once you have that, locate the small screw on the back of the key fob. It’s usually located near the bottom. Use the screwdriver to remove the screw, and then pry open the back of the key fob.

Inside, you’ll see the battery. It will be clearly marked with a “+” and a “-” sign. Use a small flathead screwdriver to carefully pry the old battery out. Take note of which way the battery is facing before you remove it so you can put the new one in the same way.

Now, it’s time to put in the new battery. Again, make sure you put it in the same orientation as the old one. Once the new battery is in, screw the back of the key fob back on. And that’s it! You’ve successfully changed the battery in your Jeep key fob.

How Do You Open The Key Fob On A 2016 Jeep Cherokee?

If you’re like most people, you probably don’t think about your key fob very often. But when you need to use it, you want to know how to open the key fob on a 2016 Jeep Cherokee.

There are a few different ways to open the key fob on a 2016 Jeep Cherokee. The first way is to simply press the button on the top of the key fob. This will open the key fob so that you can insert the key.

The second way to open the key fob on a 2016 Jeep Cherokee is to press the button on the side of the key fob. This will open the key fob so that you can insert the key.

The third way to open the key fob on a 2016 Jeep Cherokee is to press the button on the bottom of the key fob. This will open the key fob so that you can insert the key.

Whichever way you choose to open the key fob on a 2016 Jeep Cherokee, be sure to insert the key into the keyhole before you close the key fob. Otherwise, you may have to start the process all over again.

Final Word

Thanks for following along! Your new battery should be working great. If you have any other questions about Jeep key fobs, be sure to check out our other blog posts or contact us.

Related Post:

Share
Tweet
Pin
Share