How To Change Battery Kawasaki Vulcan 900?

As an Amazon Associate, I Earn From Qualifying Purchases.

Last Updated on September 15, 2022 by Ellis Gibson (B.Sc. in Mechanical Engineering)

If you’re like most people, you rely on your Kawasaki Vulcan 900 to get you around. But what happens when your battery dies? You may be thinking that you’ll have to call a tow truck or take the bus, but changing your battery is actually a pretty simple process. In this article, we’ll show you how to change your battery in just a few easy steps.

So, how to change battery kawasaki vulcan 900?

1. Park your Kawasaki Vulcan 900 on a level surface and turn off the engine.

2. Remove the seat by unscrewing the bolts that hold it in place.

3. Locate the battery under the seat. It is held in place by two bolts.

4. Remove the bolts and carefully take out the battery.

5. Install the new battery in the same position and replace the bolts.

6. Put the seat back on and screw in the bolts.

7. Start the engine and let it run for a few minutes to charge the new battery.

Let’s dig into it and find out what’s going on.

Step By Step Process On: How To Change Battery Kawasaki Vulcan 900?

Here I will explain you step by step process of how to change battery kawasaki vulcan 900? let’s see how to change battery kawasaki vulcan 900.

REQUIRED TOOLS:

  1. Knee
  2. Screwdriver
  3. Wrench
  4. Pliers
  5. New Battery

Step-01:unlock the seat

In order to replace the battery on your Kawasaki Vulcan 900, you will first need to unlock the seat. This can be done by putting your knee on the passenger seat and pushing it down to unlock it.

Step-02: remove the tool box

Next, you will need to remove the tool box in order to access the battery. To do this, you will need to unscrew the two bolts that hold it in place, and then disconnect the cables and wiring from the tool box.

Step-03: disconnect the battery

Once the tool box is removed, you will then need to disconnect the battery. To do this, you will need to unscrew the terminal screw and disconnect the negative battery cable from the negative terminal. Next, remove the cover from the positive terminal, unscrew the terminal screw, and disconnect the positive cable.

Step-04: remove the old battery

With the battery disconnected, you can now remove it from the battery box. Once the old battery is removed, you can then install the new battery.

Step-05: install the new battery

When installing the new battery, make sure that the terminals are facing forward. Then, connect the positive cable to the positive terminal, and the negative cable to the negative terminal. Once the cables are connected, you can then screw the terminals back in place.

Step-06: install the tool box

With the new battery installed, you can now install the tool box. To do this, simply slide it back into place and screw the bolts back in.

Step-07: put the seat back

Once the tool box is installed, you can then put the seat back. Simply slide it forward and push it down into place.

Step-08: test the new battery

Now that the new battery is installed, you can test it to make sure it is working properly. To do this, simply turn on the ignition and start the engine. If the new battery is working properly, the engine should start without any issues.

If you wanted to watch a youtube video that shows you how to change battery kawasaki vulcan 900? I have included a video below:

What Battery Does A Kawasaki Vulcan 900 Take?

Do you have a Kawasaki Vulcan 900 Classic and are looking for a new battery? If so, you may be wondering what battery your bike takes. Kawasaki Vulcan 900 Classics take a YTX12-BS 12V 10AH battery. This battery is designed specifically for Kawasaki Vulcan 900 Classics and will provide your bike with the power it needs to start and run properly.

As well as that, This battery is for a Kawasaki Vulcan 900 Classic 900CC 06-09. It is a 12V 10AH battery.

Where Is The Battery In A Kawasaki Motorcycle?

This is a question that we get asked a lot here at Kawasaki. While the answer may seem obvious to some, it’s not always so clear to everyone. So, in order to help out those who may not know, we’ve put together a quick guide on where to find the battery in a Kawasaki motorcycle.

The first thing you’ll need to do is locate the main fuse box. This is usually located under the seat, near the battery. Once you’ve found the fuse box, you’ll need to remove the seat to access it. Once the seat is removed, you’ll see the battery located under the seat.

If you have any further questions about the location of the battery in a Kawasaki motorcycle, feel free to contact us and we’ll be happy to help.

What Size Battery Does A Kawasaki Vulcan Take?

The Kawasaki Vulcan is a powerful motorcycle that requires a strong battery to start it. The battery size that is required depends on the model of Kawasaki Vulcan that you have. For example, the Kawasaki Vulcan 900 Classic requires a 12 volt, 18 amp-hour battery. The Kawasaki Vulcan 2000 requires a 12 volt, 28 amp-hour battery.

How Do You Change The Battery?

If you’re like most people, you probably don’t think about your car’s battery until it’s time to change it. And if you’re like most people, you probably don’t know how to change it. That’s why we’re here to help.

Changing a car battery is a pretty simple process, but it’s one that can be a little tricky if you’ve never done it before. But don’t worry, we’ll walk you through the entire process step-by-step.

First, you’ll need to gather a few tools. You’ll need a ratchet, a socket, and a wrench. You’ll also need a battery terminal cleaning brush.

Next, you’ll need to locate the battery. It’s usually located in the engine compartment, close to the fender. Once you’ve found the battery, you’ll need to remove the negative terminal first. To do this, simply loosen the nut with your wrench and then remove the terminal.

Now, you’ll need to remove the positive terminal. Again, loosen the nut with your wrench and then remove the terminal.

With the terminals removed, you can now remove the old battery. Simply lift it out of the battery tray and set it aside.

Now, it’s time to install the new battery. Start by setting the new battery in the battery tray. Then, attach the positive terminal first. To do this, simply place the terminal on the post and then tighten the nut with your wrench.

Next, attach the negative terminal. Once both terminals are secure, you can now close the hood and start your car.

Final Word

If your Kawasaki Vulcan 900 is in need of a new battery, follow these simple steps and you’ll have it changed in no time! First, locate the battery under the seat. Next, disconnect the negative terminal first, followed by the positive terminal. Once the terminals are disconnected, you can remove the old battery and install the new one. Be sure to connect the terminals in the reverse order, positive first and then negative. With the new battery in place, give your Kawasaki Vulcan 900 a test ride to make sure everything is working properly.

Related Post:

Share
Tweet
Pin
Share