How To Change Battery Kidde Smoke Detector?

As an Amazon Associate, I Earn From Qualifying Purchases.

Last Updated on September 15, 2022 by Ellis Gibson (B.Sc. in Mechanical Engineering)

If you are like most people, the battery in your Kidde smoke detector is dead. You may not even know how to change it. This article will show you how to change the battery in your Kidde smoke detector and keep your family safe.

So, how to change battery kidde smoke detector?

To change the battery in a Kidde smoke detector, remove the detector from the mounting bracket and twist the unit open. Remove the old battery and insert a new 9-volt battery. Close the unit and twist to lock. Replace the detector on the mounting bracket.

Let’s dig into it and see if we can solve the mystery.

Step By Step Process On: How To Change Battery Kidde Smoke Detector?

Here I will explain you step by step process of how to change battery kidde smoke detector? let’s see how to change battery kidde smoke detector.

REQUIRED TOOLS:

  • A 9Volt Battery
  • Screwdriver (+)
  • ADDITIONAL TOOLS LIST:
  • Test Button

Step-01:

To open the Kidde smoke detector, rotate it anti-clockwise. This unlocks the back clips and the top plate.

Step-02:

To remove the wired connection, press on the sides and shake the detector. The battery door is located on the back side.

Step-03:

Press the battery door to open it. The battery in this smoke detector is a 9 volt battery. To take it out, hold the yellow strip and remove the battery.

Step-04:

Get a new battery of any brand. Make sure it is a 9 volt battery.

Step-05:

When you are putting the new battery back, put the yellow strip back in. Then, clip the battery down. This means it is locked in.

Step-06:

Turn the yellow strip in and push the door back inside. This means the detector is properly installed.

Step-07:

There is a test button on the detector. Press it for one second to run a test for all the smoke detectors.

If you wanted to watch a youtube video that shows you how to change battery kidde smoke detector? I have included a video below:

How Do You Change Battery In Kidde Smoke Alarm?

If you have a Kidde smoke alarm, you may be wondering how to change the battery. The process is actually quite simple and only takes a few minutes. Here’s what you need to do:

1. Locate the smoke alarm. It should be mounted on the ceiling or high on a wall.

2. Remove the smoke alarm from its mount. There should be a release tab or lever that you can press or pull to release the alarm.

3. Open the battery compartment. This is usually located on the back of the alarm.

4. Remove the old battery and insert a new one. Make sure the new battery is inserted in the correct direction.

5. Close the battery compartment and re-mount the smoke alarm.

That’s it! You’ve now successfully changed the battery in your Kidde smoke alarm.

How Do I Remove The Cover From My Kidde Smoke Detector?

If you’re wondering how to remove the cover from your Kidde smoke detector, you’ve come to the right place. In this blog post, we’ll show you how to do just that.

First, locate the release tab on the side of the smoke detector. Gently press down on the tab and rotate the cover counterclockwise until it comes off.

Once the cover is off, you’ll see the battery compartment. Remove the batteries and then put the cover back on.

That’s it! You’ve now successfully removed the cover from your Kidde smoke detector.

How Do You Change The Battery In A Kidde Smoke And Carbon Monoxide Alarm Hardwired?

If you have a Kidde smoke and carbon monoxide alarm that is hardwired, you will need to know how to change the battery. This is not a difficult task, but it is important to follow the instructions carefully.

First, you will need to find the battery compartment. This is usually located on the back of the alarm. Once you have found the battery compartment, you will need to remove the cover.

Next, you will need to disconnect the old battery. To do this, you will need to remove the two wires that are connected to the battery. Once you have disconnected the old battery, you can now remove it from the compartment.

Now, you will need to insert the new battery. Make sure that the new battery is inserted in the same direction as the old one. Once the new battery is in place, you can now reconnect the two wires.

Finally, you will need to replace the cover on the battery compartment. Once you have replaced the cover, your Kidde smoke and carbon monoxide alarm will be ready to use.

How Do You Open A Kidde Smoke Alarm?

When it comes to fire safety, there is no such thing as being too prepared. Smoke alarms are an essential part of any fire safety plan, and knowing how to open and change the batteries in your Kidde smoke alarm can mean the difference between life and death in the event of a fire.

Changing the batteries in your Kidde smoke alarm is a simple process that only takes a few minutes. Here’s how to do it:

1. Locate the battery compartment door on the smoke alarm.

2. Press down on the door to release it, then pull the door open.

3. Remove the old battery from the compartment by pulling it straight out.

4. Insert the new battery into the compartment, making sure the battery’s connectors (+ -) are facing out.

5. Close the battery compartment door, then test the smoke alarm to make sure it’s working properly.

By following these simple steps, you can ensure that your Kidde smoke alarm is always in good working order – and that you and your family are prepared in the event of a fire.

As well as that, To open the battery compartment on a device, press down on the battery compartment door to release it and then pull the battery straight out. To insert a new battery, make sure the battery’s connectors are facing out and then insert it into the compartment.

Final Word

Now that you know how to change the battery in your Kidde smoke detector, be sure to check the batteries regularly and replace them as needed. By doing so, you can help ensure that your smoke detector will be there to protect you and your family in the event of a fire.

Related Post:

Share
Tweet
Pin
Share