How To Change Battery Nixon Watch?

As an Amazon Associate, I Earn From Qualifying Purchases.

Last Updated on September 15, 2022 by Ellis Gibson (B.Sc. in Mechanical Engineering)

If your Nixon watch has stopped working, it may just need a new battery. In this article, we’ll show you how to change the battery in a Nixon watch. With a few simple tools, you can have your watch up and running in no time.

So, how to change battery nixon watch?

To change the battery in a Nixon watch, you will need a small screwdriver and a new battery. First, remove the screw from the back of the watch casing with the screwdriver. Next, pry open the back of the casing with the screwdriver. Be careful not to damage the watch. Inside the casing, you will see the battery. Remove the old battery and replace it with the new one. Finally, screw the back of the casing back on and you’re done!

Let’s dig into it and see where it takes us.

Step By Step Process On: How To Change Battery Nixon Watch?

Here I will explain you step by step process of how to change battery nixon watch? let’s see how to change battery nixon watch.

REQUIRED TOOLS:

  1. Watch back plate removal tool
  2. New Sony 626 SW or 377 battery
  3. Screwdriver (for screwing back plate on)

Step-01:

First, you’ll need to remove the back plate from the watch in order to access the battery. There are no exposed screws, so you’ll need a special tool to do this. You can find this tool online or at your local hardware store.

Step-02:

Once you have the back plate off, you’ll see the battery. It’s a small Sony 626 SW or 377 equivalent. To remove the battery, there is a tiny lever on the side. Gently push the lever up and the battery will pop out.

Step-03:

Now, take your new battery and insert it into the watch, making sure the flat side is facing you. Once the battery is in, push the lever back down to secure it.

Step-04:

Now, you can screw the back plate back on and reverse the process. Make sure everything is tight and secure before you put your watch back on.

And that’s it! You’ve successfully changed the battery in your Nixon watch.

If you wanted to watch a youtube video that shows you how to change battery nixon watch? I have included a video below:

How Do I Change The Battery In My Nixon?

If your Nixon watch has a screw-down crown, the battery is most likely located behind the crown. To access the battery, unscrew the crown and pull it away from the watch. You should see a small hole in the watch case. Insert a small screwdriver or penknife into the hole and twist to release the back of the watch. The battery will be located beneath the watch back.

How Do You Take Off A Nixon Watch?

It’s not difficult to take off a Nixon watch, but it’s important to do it carefully so you don’t damage the watch or the band. First, place your watch face down on a soft cloth or pad. Then, take a spring bar tool and place the v-shaped prong in the small hole of the spring bar outside of the lug (the metalloop where the band attaches to the watch). Use the tool to depress the bar and release the pin. Carefully remove the band. If your watch has a leather band, you may need to use a leather punch to remove the band.

That’s all there is to it! With a little care, you can easily remove your Nixon watch band.

Also, Place your watch face down on the cloth or pad. Take the spring bar tool and place the v-shaped prong in the small hole of the spring bar outside of the lug. Use the tool to depress the bar and release the pin. Carefully remove the band.

Does The Nixon 51 30 Have A Battery?

The short answer is yes, the Nixon 51-30 has a battery. The long answer is a little more complicated.

The Nixon 51-30 is a quartz-powered watch, which means that it runs on battery power. The battery in the watch is used to power the quartz movement, which keeps time.

The battery in the Nixon 51-30 will last for around two years with normal use. If you find that the battery is running low, you can replace it yourself with a new battery.

If you have any further questions about the Nixon 51-30, or any other watch, please feel free to contact us.

How Do You Open A Nixon Time Teller Watch?

Nixon Time Teller watches are pretty easy to open, actually. Just grab the small knob on the right side of the watch face and pull it out. The knob will pop out and you can then unscrew the back of the watch. Nixon Time Teller watches use a standard watch battery, so you can easily find a replacement if you need to.

Final Word

After reading this blog post, you now know how to change the battery in your Nixon watch. We hope you found this information helpful and that you’ll share it with your friends. If you have any questions, feel free to contact us and we’ll be happy to help. Thanks for reading and happy watch battery changing!

Related Post:

Share
Tweet
Pin
Share