How To Change Battery On Blackberry Dtek50?

As an Amazon Associate, I Earn From Qualifying Purchases.

Last Updated on September 15, 2022 by Ellis Gibson (B.Sc. in Mechanical Engineering)

If you’re like me, than you’re probably always on your phone and rely on it to stay connected with the world. So, when your battery starts to die it can be really frustrating. You may be wondering how to change the battery on your BlackBerry dtek50. Well, don’t worry, I’m here to help. In this article, I’ll walk you through the steps to change your battery, so you can get back to using your phone.

So, how to change battery on blackberry dtek50?

Assuming you would like tips on how to change the battery on a BlackBerry DTEK50:

1. Start by ensuring that your BlackBerry DTEK50 is turned off. 2. Next, remove the back panel of the phone. On the back of the phone, locate the small notch near the bottom left corner. Use a small tool to pry off the back panel. 3. With the back panel removed, locate the battery. The battery will be attached to the phone via two small metal connectors. 4. Use a small tool to gently disconnect the battery from the phone. 5. Take your new battery and insert it into the phone, making sure that the metal connectors are properly aligned. 6. Use a small tool to reconnect the battery to the phone. 7. Finally, reattach the back panel to the phone.

Let’s dig into it and see if we can solve the mystery.

Step By Step Process On: How To Change Battery On Blackberry Dtek50?

Here I will explain you step by step process of how to change battery on blackberry dtek50? let’s see how to change battery on blackberry dtek50.


  1. Small Phillips head screwdriver 2. pry tool 3. new battery for BlackBerry DTEK50 4. heat gun or hair dryer

OPTIONAL TOOLS LIST: 1. replacement NFC pad 2. replacement capacitive buttons 3. replacement programmable convenience button 4. replacement volume rocker


Before you begin, make sure you have the following tools and materials:

– A small Phillips head screwdriver – A pry tool (I suggest a thin metal one) – A new battery for your BlackBerry DTEK50 – A heat gun or hair dryer


Start by removing the back cover of your phone. There are no screws holding it on, so simply insert your pry tool at the top or bottom of the phone and gently pop the cover off.


Underneath the back cover, you’ll find the NFC pad. NFC stands for “near field communication.” This allows your phone to communicate with other devices that are close by.

Because of this, the NFC pad needs to be shielded from other electronic noise or interference from the phone’s internal circuits. This is what the big black rectangle of metallic tape is for.

Carefully peel off the tape, being careful not to damage the NFC pad underneath.


There are five screws holding down a metal plate over the battery. Remove these screws and set the plate aside.


Now you can unsnap the battery and the charging port ribbons. They simply snap in and out like Legos.


There are two more snaps along the side of the motherboard, at the top and bottom. These hold in the front capacitive buttons and the programmable convenience button.


Remove the four screws holding down the top black plastic piece. This will give you access to the earpiece and the front sensors.


To remove the motherboard, unclip the big ribbon cable and the black signal wire. The motherboard will now lift up and away from the phone.


One cool thing about the BlackBerry DTEK50 is that the LED flash is built into the motherboard.


The small 8 megapixel camera is also attached to the motherboard.


Now that the motherboard is out of the way, you can see what the little side ribbons do. The bottom one is for the front capacitive buttons, the middle one is for the programmable convenience button, and the top ribbon is for the volume rocker.

If you wanted to watch a youtube video that shows you how to change battery on blackberry dtek50? I have included a video below:

How To Remove Battery From Dtek50?

If you’re having trouble removing the battery from your Dtek50, don’t worry, you’re not alone. Many people have difficulty removing the battery from their Dtek50, but it is actually quite simple once you know how.

First, locate the small notch on the bottom of the phone. This is where you will insert the tool to pry the battery cover off.

Next, insert the tool into the notch and apply pressure to pry the cover off. The cover should come off easily, revealing the battery underneath.

Finally, grasp the battery with your fingers and pull it out of the phone. Be careful not to damage the battery contacts as you remove it.

With a little bit of practice, you should be able to remove the battery from your Dtek50 with ease.

How Do I Remove Battery From Blackberry?

Assuming you would like tips on how to remove the battery from a BlackBerry:

1. Start by powering off your device. If you can’t power it off, you can remove the battery while the device is still on, but we don’t recommend it.

2. Locate the small hole on the back of the device. This is the hole you will use to remove the battery.

3. Using a small tool, like a paperclip, insert it into the hole and gently pry the back cover off.

4. Once the back cover is off, you should see the battery.

5. Gently lift the battery out of the device.

6. To replace the battery, simply reverse the process. Place the battery back into the device and then snap the back cover back on.

How Do You Change A Blackberry Battery?

If you’re like most people, you probably don’t think about changing your BlackBerry battery until it’s too late. After all, why would you? The battery is one of the most important parts of your phone, and it’s not exactly easy to replace.

But when your battery starts to die, you’ll be glad you know how to change it. Here’s a step-by-step guide to changing your BlackBerry battery:

1. Start by removing the back cover of your phone. This will give you access to the battery compartment.

2. Next, remove the battery from the compartment. You may need to use a small tool, like a paperclip, to help you remove the battery.

3. Now, take your new battery and insert it into the compartment. Make sure the positive and negative sides of the battery are facing the correct way.

4. Finally, replace the back cover of your phone.

And that’s it! You’ve now successfully replaced your BlackBerry battery.

How Do I Reset My Dtek50?

If you’re looking to reset your DTEK50, there are a few things you’ll need to do. First, you’ll need to back up your data. Once you’ve done that, you can follow the steps below to reset your device.

1. From the home screen, swipe down from the top of the screen. 2. Tap the Settings icon. 3. Tap Security. 4. Tap Reset Device. 5. Tap Reset Device. 6. Enter your BlackBerry ID password 7. Tap Reset. 8. When prompted, tap Continue. 9. Your device will now restart and begin the reset process.

Final Word

If your BlackBerry DTEK50 is running low on battery, follow these steps to change the battery:

1. Power off your BlackBerry DTEK50.

2. Remove the back cover.

3. Remove the battery.

4. Insert the new battery.

5. Replace the back cover.

6. Power on your BlackBerry DTEK50.

And that’s all there is to it! Changing the battery on your BlackBerry DTEK50 is a quick and easy process.

Related Post: