How To Change Battery On Toyota Prius Key Fob?

If your Toyota Prius key fob has a dead battery, you’re going to need to replace it. Luckily, this is a pretty easy process that anyone can do. All you need is a small screwdriver and a new CR2032 battery.

First, start by locating the small screw on the back of the key fob. Use your screwdriver to remove this screw, then pry the back of the key fob open. You should now see the dead battery.

Remove the dead battery and replace it with the new one. Make sure the “+” side is facing up. Once the new battery is in place, screw the back of the key fob back on and you’re all done!

Let’s dig into it and see if we can get to the bottom of it.

Step By Step Process On: How To Change Battery On Toyota Prius Key Fob?

Here I will explain you step by step process of how to change battery on toyota prius key fob? let’s see how to change battery on toyota prius key fob.

Step-01:Open the Key Fob

Using a small Phillips head screwdriver, remove the four screws that hold the back cover in place.

Step-02: Remove the Battery

Using a small flat blade screwdriver, pry the battery out of the key fob.

Step-03: Install the New Battery

Install the new battery in the key fob, making sure that the positive (+) side is facing up.

Step-04: Close the Key Fob

Replace the back cover and screw it in place.

Step-05: Test the Key Fob

Press the button on the key fob to test it. If it doesn’t work, make sure that the battery is installed correctly.

If you wanted to watch a youtube video that shows you how to change battery on toyota prius key fob? I have included a video below:

What Kind Of Battery Does A Prius Key Use?

The 2032 button cell battery is a small, round battery that is commonly used in small electronic devices, such as keyless entry fobs and digital thermometers. This battery type is also known as a coin cell battery.

The 2032 button cell battery gets its name from its size; it is 20 mm in diameter and 3.2 mm thick. This battery type is often used in devices that require a small amount of power, such as keyless entry fobs, which only need to power a small LED light.

The 2032 button cell battery is made up of two electrodes, a positive and a negative, that are separated by an electrolyte. When the battery is being used, electrons flow from the negative electrode to the positive electrode through the electrolyte.

This battery type is not rechargeable, so once it is depleted, it will need to be replaced. The average lifespan of a 2032 button cell battery is about two to three years, but this will vary depending on the brand and how often the battery is used.

Also, A button cell battery is a type of battery that is often used in small electronic devices. It is a small, round battery that can be found in many different types of devices, including watches, calculators, and some hearing aids.

How Do You Change A Toyota Prius Key Battery?

If you own a Toyota Prius, chances are you’re well aware of how great of a car it is. Not only is it fuel efficient, but it’s also packed with features that make it a joy to drive. One feature that you may not be aware of, however, is the key battery. Just like any other battery, the key battery will eventually need to be changed. Here’s a quick guide on how to do just that.

First, start by taking out the old battery. You’ll find it located in the key fob, and it will likely be a CR2032 battery. Once you have the old battery out, simply insert the new one in its place. Be sure to orient the battery correctly so that the positive and negative terminals are in the correct positions.

Once the new battery is in place, simply put the key fob back together and you’re done! It’s really that simple. Changing the key battery in your Toyota Prius is a quick and easy process that anyone can do. So if your key fob starts acting up, don’t hesitate to give it a new battery.

How Do I Change The Battery In My Prius Key Fob 2015?

If you own a Prius, chances are you’re familiar with the battery-operated key fob. This little gadget is responsible for locking and unlocking your doors, as well as opening your trunk. Over time, the battery in your key fob will begin to die, and when it does, you’ll need to know how to change it.

Luckily, changing the battery in your Prius key fob is a relatively easy process. All you’ll need is a small screwdriver and a new CR2032 battery. Here’s a step-by-step guide on how to change the battery in your Prius key fob:

1. Start by removing the key chain from your key fob. This will give you easier access to the back of the key fob.

2. Using a small screwdriver, remove the screw that’s holding the back cover in place.

3. Carefully remove the back cover, being careful not to lose the small spring that’s underneath.

4. Take out the old battery and replace it with a new CR2032 battery.

5. Replace the back cover and screw, then reattach your key chain.

And that’s it! You’ve now successfully changed the battery in your Prius key fob.

How Do I Change The Battery In My Prius Key Fob 2018?

If you’re the owner of a 2018 Toyota Prius, you may be wondering how to change the battery in your key fob. After all, the key fob is an essential part of the car, and if the battery dies, you won’t be able to use it. Fortunately, changing the battery in your Prius key fob is a relatively easy process. Here’s a step-by-step guide on how to do it:

1. Start by locating the release button on the back of the key fob. This button is usually located near the bottom of the fob.

2. Press the release button to open the key fob.

3. Once the key fob is open, you’ll see the battery located inside.

4. Use a small flathead screwdriver to carefully pry the old battery out of the key fob.

5. Insert the new battery into the key fob, making sure that the positive and negative ends are correctly oriented.

6. Close the key fob and you’re done!

What Is The Average Cost To Replace The Key Fob Battery In A 2014 Toyota Prius?

The average cost to replace the key fob battery in a 2014 Toyota Prius is about $50. However, the cost can vary depending on the type of battery and the make and model of the car.

How To Change Prius Key Battery 2012?

If you own a 2012 Toyota Prius, you may be wondering how to change the key battery. The process is actually quite simple and only takes a few minutes. Here’s a step-by-step guide on how to do it:

1. Start by removing the key from the ignition.

2. Locate the small hole on the back of the key.

3. Insert a small screwdriver or other pointed object into the hole.

4. Gently twist the screwdriver until you feel the key release from the casing.

5. Carefully pull the key apart to expose the battery.

6. Use a small coin or other object to pry the old battery out of the casing.

7. Insert the new battery into the casing, making sure that the positive (+) side is facing up.

8. Gently press the key back together.

9. Test the new battery by inserting the key into the ignition and starting the car.

And that’s it! You’ve now successfully changed the battery in your 2012 Toyota Prius key.

How To Change Prius Key Battery 2010?

If your key fob battery is dead, you may be wondering how to change it. Here are some simple instructions on how to change the battery in your Prius key fob.

1. Start by removing the key fob from your key ring. You’ll need to use a small flathead screwdriver to pry open the case.

2. Once the case is open, you’ll see the battery inside. It will be a small, round coin cell battery.

3. Use a small pair of tweezers to remove the old battery from the key fob.

4. Insert the new battery in the key fob, making sure that the positive (+) side is facing up.

5. Close the key fob case and give it a good snap to make sure it’s closed tightly.

And that’s it! You’ve now successfully changed the battery in your Prius key fob.

What Is The Toyota Prius Key Fob Battery Replacement Procedure For A 2010 Model?

The Toyota Prius is a hybrid electric vehicle that was first introduced in 1997. The vehicle has a gasoline engine and an electric motor. The vehicle uses a battery to power the electric motor. The battery is located under the rear seats. The battery is charged by the gasoline engine and by regenerative braking. The vehicle has a key fob that is used to unlock the doors and start the vehicle. The key fob has a battery that needs to be replaced when it dies. The following is the procedure for replacing the battery in the key fob for a 2010 Toyota Prius.

1. Open the key fob. There is a small button on the back of the key fob that is used to release the back cover. Press the button and pull the back cover off of the key fob.

2. Remove the old battery. There will be a small metal tab that is holding the battery in place. Use a small flathead screwdriver to pry the tab up and then pull the battery out.

3. Insert the new battery. Make sure that the positive side of the battery is facing up. Replace the metal tab to hold the battery in place.

4. Close the key fob. Snap the back cover back into place.

What Type Battery Does 2019 Toyota Prius Key Fob Required?

One of the benefits of owning a 2019 Toyota Prius is the key fob. The key fob not only opens and closes the doors and trunk, but it also has a built in keyless entry system. The key fob also has a panic button that will emit a loud sound if you are in danger. The key fob batteries usually last around three to five years, but it is always good to know how to replace them. The 2019 Toyota Prius key fob uses a CR2032 battery.

How To Replace The Toyota Prius “Rounded Rectangle” Key Fob Battery (2010, 2011, 2012, 2013, 2014, 2015)?

If you drive a Toyota Prius, you know that the key fob is an important part of your car. The key fob not only allows you to start your car, but it also allows you to lock and unlock your doors. The key fob is also what allows you to open your trunk and activate the panic alarm. In other words, it’s a pretty important little device.

The key fob for the Toyota Prius is powered by a battery, and like all batteries, it will eventually need to be replaced. If you find that your key fob is not working as well as it used to, or if it stops working altogether, it’s probably time to replace the battery.

Fortunately, replacing the battery in your Toyota Prius key fob is a pretty easy process. In most cases, it’s a matter of opening up the key fob and popping in a new battery. In this article, we’ll show you how to replace the battery in your Toyota Prius key fob.

What You’ll Need

In order to replace the battery in your Toyota Prius key fob, you’ll need a few things:

– A small flathead screwdriver – A new CR2032 battery

Step 1: Remove the Back Cover

The first step is to remove the back cover of your key fob. There are two small Phillips head screws that hold the back cover in place. Use your small screwdriver to remove these screws.

Once the screws are removed, the back cover should come right off. If it’s stuck, you can use your screwdriver to pry it off.

Step 2: Remove the Old Battery

With the back cover off, you should now be able to see the old battery. Using your finger or a small flathead screwdriver, gently pry the old battery out of its socket.

Step 3: Insert the New Battery

Now it’s time to insert the new battery. Take your new CR2032 battery and insert it into the socket, making sure that the positive side (the side with the + sign) is facing up.

Step 4: Replace the Back Cover

Once the new battery is in place, you can replace the back cover. Start by aligning the cover with the opening in the key fob. Then, insert the two Phillips head screws and tighten them in place.

Your key fob should now be working properly. If it’s not, you may need to replace the battery in your key fob transmitter.

What Kind Of Battery Does A 2019 Toyota Prius Remote Key Fob Take?

Assuming you are asking about the Toyota Prius (2019 model year), the answer is that it takes a CR2032 battery.

The CR2032 is a 3 volt battery that is commonly used in small electronic devices, like calculators, cameras, and remote key fobs. It is a lithium battery that is round with a flat top, and it is about the size of a quarter.

If you need to replace the battery in your Toyota Prius remote key fob, you can purchase a CR2032 battery at most electronics or convenience stores.

How To Replace The Toyota Prius “Rectangular” Key Fob Battery (2004, 2005, 2006, 2007, 2008, 2009)?

If you have a 2004-2009 Toyota Prius, chances are you’ve noticed that the key fob is starting to look a little worn out. The battery inside is probably getting weak, too. Luckily, it’s easy to replace the battery in your Prius key fob. Here’s how:

First, find a replacement battery. You’ll need a CR2032 battery, which you can find at most hardware stores or online.

Next, use a small screwdriver or a knife to pry open the back of the key fob. Be careful not to damage the plastic.

Once the back is open, you’ll see the old battery. Carefully remove it and replace it with the new one.

Finally, snap the back of the key fob closed and you’re done! Your key fob should now be working like new.

How To Replace The Toyota Prius “Fixed” Key Fob Battery (2012, 2013, 2014, 2015, 2016)?

If you own a Toyota Prius from the years 2012, 2013, 2014, 2015, or 2016, then you know that the key fob battery is not the easiest thing to replace. The good news is, we have a helpful tutorial that will make the process a whole lot easier for you.

First, you’ll need to locate the small release button on the back of the key fob. Once you’ve found it, use a paperclip or a small screwdriver to depress the button. This will release the back cover of the key fob.

Next, you’ll need to remove the old battery. Be careful not to touch the electrical contacts with your fingers, as this could damage the key fob. Once the old battery is out, you can insert the new one. Make sure that the positive (+) side is facing up.

Now, simply replace the back cover of the key fob and you’re all done! With a new battery in your key fob, you’ll be able to enjoy years of worry-free use.

Final Word

If your Toyota Prius key fob has lost its luster, it might be time to change the battery. Here’s a quick and easy guide on how to do just that.

You’ll need a small Phillips head screwdriver and a new CR2032 battery. First, use the screwdriver to remove the screw on the back of the key fob. Next, pry open the case and replace the old battery with the new one. Make sure the positive side (marked with a plus sign) is facing up. Finally, screw the back of the key fob back on and you’re good to go!

If your key fob starts acting up, changing the battery is a quick and easy fix. So don’t wait until it’s too late – give it a try today.

FAQ

How Do I Replace The Battery In My 2017 Toyota Prius Key Fob?

Assuming you have a 2017 Toyota Prius, the replacement process is as follows:

1. Find the release button on the back of the key fob.

2. Use a small flat-head screwdriver to pry open the key fob.

3. Remove the old battery and insert the new one.

4. Snap the key fob back together.

5. Test the new battery by pressing the button on the key fob.

How Do You Change The Battery In A Prius Key?

If you’re like most people, you probably don’t know how to change the battery in your Prius key. And that’s perfectly fine, because there’s really no need to. The battery in your key fob is designed to last for many years, and it’s not something that you need to worry about changing very often.

However, there may come a time when you need to change the battery in your key fob. Perhaps you’ve had it for a while and it’s starting to show signs of age, or maybe you just want to be prepared in case the battery does die. Either way, it’s not difficult to change the battery in your Prius key, and we’re here to show you how.

First, you’ll need to locate the battery cover. This is usually located on the back of the key fob, and it may be held in place with a small screw or clip. Once you’ve found the cover, you can remove it to access the battery.

Next, you’ll need to remove the old battery. This is usually a CR2032 or CR2025 coin-cell battery, and you can find it at most electronics stores. Once you’ve removed the old battery, you can install the new one by following the same process in reverse.

That’s all there is to it! Changing the battery in your Prius key is a quick and easy process that anyone can do. Just be sure to use the correct type of battery, and you’ll be back to using your key fob in no time.

What Is The Average Lifespan Of A Prius Key Fob Battery?

The average lifespan of a car key battery is around two years. However, depending on how often you use your car keys, the battery life can vary. For example, if you use your car key fob regularly to unlock your car doors, the battery will die faster. If you only use it occasionally, the battery will last longer. There are also other factors that can affect the lifespan of a car key battery, such as the type of battery and the brand of key fob.

Related Post: