How To Change Battery Ram Key Fob?

As an Amazon Associate, I Earn From Qualifying Purchases.

Last Updated on September 23, 2022 by Ellis Gibson (B.Sc. in Mechanical Engineering)

If you’re like most people, you rely on your key fob to unlock your car doors and get you into your Jeep or RAM truck. So what do you do when your key fob starts acting up? You could take it to a dealer and have them replace the battery, or you could save yourself some time and money by doing it yourself.

In this article, we’ll show you how to replace the battery in your Jeep or RAM key fob quickly and easily. We’ll also provide some tips on how to extend the life of your key fob battery.

So, how to change battery ram key fob?

To replace the battery in your Jeep or RAM truck key fob, follow these easy steps: 1. Start by removing the key fob from the key ring. 2. Look for a small Phillips head screw on the back of the key fob. 3. Using a small Phillips head screwdriver, remove the screw. 4. Gently pry the back of the key fob open with a small flathead screwdriver. 5. Once the back is pried open, you will see the battery. 6. Carefully remove the old battery and replace it with a new CR2032 battery. 7. Close the back of the key fob and screw it shut. 8. Test the key fob to make sure it is working properly.

Let’s dig into it and see if we can find a solution.

Step By Step Process On: How To Change Battery Ram Key Fob?

Here I will explain you step by step process of how to change battery ram key fob? let’s see how to change battery ram key fob.

REQUIRED TOOLS:

  1. Small screwdriver
  2. New battery (CR2032 3 volt)

OPTIONAL TOOLS LIST: 1. Key

Step-01:

First things first, you’ll want to remove the key from the key fob. To do that, simply slide the key to the side and then pull it out.

Step-02:

Once the key is removed, you’ll see that there is a small screw in the opening. Take a small screwdriver and unscrew the screw. Be careful not to lose the screw, as it is very small.

Step-03:

Once the screw is removed, you can pry the two pieces of the key fob apart. You can use your hand or a key to pry it apart.

Step-04:

Once the key fob is pried apart, you’ll see the battery. It is a cr2032 battery with a 3 volt rating. To remove the battery, simply slide it out.

Step-05:

To install the new battery, simply slide it into place. Make sure that the battery is oriented properly.

Step-06:

Once the new battery is in place, you can pry the two pieces of the key fob back together. Make sure that everything is lined up before you start squeezing it back together.

Step-07:

Once the key fob is back together, take the screw and screw it back into place. Be careful not to over-tighten the screw.

Step-08:

Once the screw is back in place, you can slide the key back into the key fob. You’ll hear it click into place.

That’s it! You’ve successfully changed the battery in your Dodge Ram key fob.

If you wanted to watch a youtube video that shows you how to change battery ram key fob? I have included a video below:

How Do You Change The Battery In A 2019 Ram Limited Key Fob?

If you’re like most people, you probably don’t think about your car key fob until it’s time to change the battery. And if you’ve never done it before, you might be wondering how to change the battery in a 2019 Ram Limited key fob.

Here’s a quick and easy guide to changing the battery in your Ram key fob:

1. Start by removing the key fob from your key ring. Most key fobs have a small release button that you can press to detach the fob.

2. Once the key fob is detached, take a look at the back. You should see a small screw or panel that you can remove.

3. Use a small screwdriver or other tool to remove the screw or panel. Once you’ve done that, you should be able to see the battery inside the key fob.

4. Use a small coin or other tool to pry the old battery out of the key fob.

5. Once you’ve removed the old battery, insert the new one making sure that the positive and negative sides are facing the correct way.

6. Replace the screw or panel that you removed in Step 2 and reattach the key fob to your key ring.

And that’s it! You’ve now successfully changed the battery in your Ram key fob.

How Do You Change The Battery In A 2019 Ram 2500 Key Fob?

If you’re like most people, you probably don’t think about your car key fob until it stops working. Then you’re left scrambling to figure out how to change the battery. If you have a 2019 Ram 2500, the process is actually pretty simple. Here’s a step-by-step guide to changing the battery in your Ram key fob:

1. Start by finding the right size battery. Your key fob uses a CR2032 battery, which is a 3-volt coin cell battery. You can find these batteries at most electronics stores.

2. Remove the old battery from the key fob. There is a small tab on the back of the key fob that you need to press in order to release the battery compartment. Once the compartment is open, you can simply remove the old battery and replace it with the new one.

3. Put the key fob back together. Once you have the new battery in place, simply snap the key fob back together and you’re done!

That’s all there is to it! Changing the battery in your Ram key fob is a quick and easy process that anyone can do.

How Do I Change The Battery In My 2016 Dodge Key Fob?

If your 2016 Dodge key fob starts to act up, it might be time to change the battery. Here’s how to do it:

1. Start by taking off the key fob’s cover. There should be a small notch or tab that you can pry open with your fingernail.

2. Once the cover is off, you should see the battery. It will be a small, round coin-type battery.

3. Use a small screwdriver or other tool to pry the old battery out.

4. Put the new battery in, making sure that the positive (+) side is facing up.

5. Put the cover back on and give it a snap to close.

That’s it! Your key fob should be as good as new.

How Do You Open A Key Fob On A 2016 Dodge Ram?

Assuming you would like tips on how to open a key fob on a 2016 Dodge Ram:

First, identify the type of key fob you have. There are two types of key fobs for the 2016 Dodge Ram: the standard key fob and the remote keyless entry (RKE) fob. The standard key fob is a basic key fob that unlocks and locks the doors and starts the engine. The RKE fob is a more advanced key fob that also allows you to remotely start the engine, open the trunk, and activate the panic alarm.

If you have the standard key fob, there is a small button on the back of the fob that you can press to release the key. If you have the RKE fob, there is a small button on the front of the fob that you can press to release the key.

Once you have released the key, you can insert it into the ignition and start the engine.

What Are Some Dodge Ram Key Fob Tricks?

Some dodge ram key fob tricks include holding down the lock or unlock button to roll all the windows up or down, and pressing the panic button to activate the car’s alarm.

How Do You Program A Dodge Ram Key Fob?

If you need to know how to program a Dodge Ram key fob, you’ve come to the right place. At KeylessEntryRemoteFob.com, we sell a wide variety of key fobs for all sorts of vehicles, including the Dodge Ram. Whether you need a replacement key fob or just want a spare, we can help you out.

Programming a Dodge Ram key fob is actually quite simple. In most cases, it can be done in just a few minutes using nothing more than the key fob itself. We’ll walk you through the process step-by-step so you can get your key fob programmed and get back on the road.

What Is The Average Life Of A 2450 Key Fob Battery?

The average life of a 2450 key fob battery is approximately two years.

What Can Be Done If The Key Fob For A Dodge Ram Is Too Sensitive?

There are a few things that can be done if the key fob for a Dodge Ram is too sensitive. One thing that can be done is to adjust the sensitivity. Another thing that can be done is to replace the key fob.

How Do You Troubleshoot A Key Fob?

There are a few ways to troubleshoot a key fob. First, check the batteries. If the batteries are dead, then the key fob will not work. Second, check to see if the key fob is properly programmed. If the key fob is not programmed, then it will not work. Third, check to see if the key fob is within range of the car. If the key fob is not within range of the car, then it will not work.

How Do You Reset A Key Fob?

To reset a key fob, you will need to consult your car’s owners manual. Each car is different, but the process is generally similar. You will need to locate the reset button on the key fob, and then press and hold it for a few seconds.

How Do You Reprogram A Key Fob?

If you need to reprogram your key fob, there are a few easy steps to follow. First, find the program button on your key fob. This is usually a small button that is recessed into the key fob. Next, locate the program button on your car. This is usually located near the ignition. Once you have found both buttons, press and hold the program button on your key fob while pressing the program button on your car. Hold both buttons down until the car’s lights flash, indicating that the key fob has been successfully programmed.

How Do You Clean A Key Fob?

To clean a key fob, you will need a damp cloth and some rubbing alcohol. First, wipe down the key fob with the damp cloth to remove any dirt or grime. Then, use the rubbing alcohol to clean any areas that are still dirty. Be sure to dry the key fob off completely before using it again.

How Do You Store A Key Fob?

To store a key fob, first find a small, flat surface like a shelf or a dresser drawer. Next, locate a keychain or other type of ring and loop the ring through the key fob’s hole. Finally, secure the key fob to the ring so it doesn’t fall off.

Final Word

If your Jeep or RAM truck key fob has stopped working, it might just need a new battery. Replacing the battery is a pretty simple process that anyone can do with just a few tools.

Here’s what you’ll need to do to change the battery in your Jeep or RAM truck key fob:

1. Start by removing the key fob from the key ring.

2. Use a small flathead screwdriver or a knife to pry open the key fob.

3. Take out the old battery and replace it with a new CR2032 battery.

4. Snap the key fob back together and you’re all set!

If your key fob still isn’t working after you’ve changed the battery, it might be time to get a new one from your local Jeep or RAM dealership.

FAQ

What Is The Reason Why The Dodge Key Fob Is Not Working After The Battery Change?

The dodge key fob is not working after the battery change because the key fob needs to be reprogrammed.

Related Post:

Share
Tweet
Pin
Share