How To Change Battery Smoke Detector Kidde?

As an Amazon Associate, I Earn From Qualifying Purchases.

Last Updated on September 23, 2022 by Ellis Gibson (B.Sc. in Mechanical Engineering)

If your Kidde smoke detector is acting up, it might be time to change the battery. This process is simple and only takes a few minutes. Plus, it’s a great opportunity to test your smoke detector to make sure it’s working properly.

So, how to change battery smoke detector kidde?

To change the battery in your Kidde smoke detector, first locate the detector unit. On the side or back of the unit, there will be a small door that opens to reveal the battery compartment. Insert fresh batteries into the compartment according to the (+/-) markings, and close the door. Test the detector to ensure that it is working properly.

Let’s dig into it and find out what’s going on.

Step By Step Process On: How To Change Battery Smoke Detector Kidde?

Here I will explain you step by step process of how to change battery smoke detector kidde? let’s see how to change battery smoke detector kidde.

REQUIRED TOOLS:

  1. Kidde carbon monoxide detector
  2. 9-volt battery
  3. Phillips head screwdriver

Step-01:

First, identify the Kidde carbon monoxide detector that is in need of a new battery. These units will have a small, round door on the front, with a small hole in the center.

Step-02:

Next, locate a new 9-volt battery. These can be found at most hardware or general stores.

Step-03:

Now, using a small Phillips head screwdriver, remove the two screws that are holding the door in place.

Step-04:

Once the screws are removed, the door can be lifted off of the unit.

Step-05:

Inside, you will see the battery compartment. There will be a small metal tab in the center, holding the battery in place.

Step-06:

Using the screwdriver, carefully pry the tab up and out of the way.

Step-07:

With the tab out of the way, the old battery can now be removed from the compartment.

Step-08:

To install the new battery, simply insert it into the compartment, making sure that the positive (+) side is facing up.

Step-09:

Once the new battery is in place, replace the metal tab, and then screw the door back into place.

Step-10:

That’s it! Your Kidde carbon monoxide detector is now ready to keep your family safe.

If you wanted to watch a youtube video that shows you how to change battery smoke detector kidde? I have included a video below:

Where Is The Battery In My Kidde Smoke Detector?

If you’re like most people, you probably don’t think about your smoke detector very often – that is, until the battery starts beeping in the middle of the night! Then, of course, you can’t help but wonder where the battery is located so you can quickly silence the annoying sound.

If you have a Kidde smoke detector, the battery is located in the back of the unit. To access the battery, simply unscrew the unit from the wall or ceiling and remove the cover. The battery will be clearly visible and can be easily removed and replaced.

So next time your Kidde smoke detector starts beeping, you’ll know exactly where to find the battery and how to quickly silence the sound.

How Do I Remove The Kidde Smoke Alarm Cover?

If you need to remove the Kidde smoke alarm cover, there are just a few simple steps you need to follow. First, you’ll need to remove the alarm from the trim ring by rotating it counter-clockwise in the direction of the OFF arrow on the cover. Next, you’ll need to disconnect the AC power harness by squeezing the locking arms on the sides of the quick connector while pulling the connector away from the bottom of the alarm. Finally, you can remove the Kidde smoke alarm cover by gently pulling it away from the bottom of the alarm. With these simple steps, you can easily remove the Kidde smoke alarm cover whenever you need to.

An additional, To remove the alarm from the trim ring, rotate the alarm counter-clockwise in the direction of the OFF arrow on the cover. To disconnect the AC power harness, squeeze the locking arms on the sides of the quick connector while pulling the connector away from the bottom of the alarm.

Why Is My Smoke Detector Chirping After I Changed The Battery?

Why Is My Smoke Detector Chirping After I Changed The Battery?

It’s normal for your smoke detector to chirp for up to 10 seconds after you change the batteries. This chirping sound signals that the device is receiving fresh power. The same thing may happen to hardwired alarms when you turn on the device’s power.

Besides this, When you change the batteries in your smoke detector, it may make a short, high-pitched sound called chirping. This is normal and means that the device is getting new power. The same thing can happen to hardwired alarms when you turn on the power.

How Do I Change The Battery In My Hardwired Smoke Detector?

If you have a hardwired smoke detector, it is important to know how to change the battery. This is because the battery is what powers the detector and if it goes dead, the detector will not work.

To change the battery in a hardwired smoke detector, you will need to first find the battery compartment. This is usually located on the back of the detector. Once you have found the battery compartment, you will need to remove the old battery and insert a new one. Be sure to follow the instructions that come with the new battery to ensure that it is installed correctly.

How To Change Battery In Smoke Detector Hardwired?

To change the battery in a smoke detector that is hardwired, you will need to first disconnect the power. Once the power is disconnected, you can then remove the cover of the smoke detector. Inside the smoke detector, you will see the battery. You will need to remove the old battery and then insert a new battery. Once the new battery is in place, you can then put the cover back on the smoke detector and reconnect the power.

How To Change Battery In Kidde Smoke Detector Hardwired?

To change the battery in a Kidde smoke detector hardwired, first remove the detector from the mounting bracket. Next, twist the top of the detector counterclockwise to remove the battery compartment cover. Finally, insert the new batteries and twist the top of the detector clockwise to close the battery compartment cover.

What Is The Kidde Smoke Detector No Battery Beeping?

The kidde smoke detector no battery beeping is an important safety feature in many homes. However, some people find the beeping noise annoying. If the beeping is bothersome, there are a few things you can try to reduce the noise. One option is to move the smoke detector to a different location in the home. Another option is to purchase a battery-operated smoke detector.

What Is The Kidde Smoke Alarm Battery Replacement Youtube?

There are many videos on YouTube that show how to replace the battery in a Kidde smoke alarm.

How Long Does A Smoke Detector Battery Last?

A smoke detector battery will last for about a year. However, if you live in an area with a lot of smog or other air pollutants, you may need to replace the battery more often.

Do All Smoke Detectors Have The Same Battery Life?

No, all smoke detectors do not have the same battery life. Some smoke detectors have a battery life of up to 10 years, while others only have a battery life of 1-2 years.

What Are The Consequences Of A Smoke Detector Not Working?

If a smoke detector is not working, the consequences can be severe. A fire can start and spread quickly, and people may not be able to escape in time. Smoke detectors are an important part of fire safety, so it is important to make sure they are working properly.

What Is The Purpose Of A Smoke Detector?

A smoke detector is a device that detects the presence of smoke in a room and raises an alarm to alert people to a fire.

What Should You Do If Your Smoke Detector Is Beeping?

If your smoke detector is beeping, you should replace the batteries.

Final Word

Now that you know how to change the battery in your Kidde smoke detector, be sure to test it regularly to ensure it is working properly. By doing so, you can help keep your family safe in the event of a fire.

FAQ

How Do You Replace The Battery In A Kidde Smoke Alarm Model S1816?

First, you’ll need to remove the Kidde smoke alarm from the wall or ceiling. To do this, twist the alarm counterclockwise until it comes loose from the mounting bracket. Next, disconnect the power supply by removing the 9-volt battery. With the power supply disconnected, you can now twist the alarm open to access the battery compartment. Inside, you’ll find the old battery which you can replace with a new 9-volt battery. Once the new battery is in place, simply close the alarm and twist it back into the mounting bracket.

How Do You Reset A Kidde Smoke Alarm When The Battery Is Low?

To reset a Kidde smoke alarm when the battery is low, you need to press and hold the test/silence button for at least 8 seconds.

1) How Do I Open The Battery Door On A Kidde Smoke Alarm?

To open the battery door on a Kidde smoke alarm, simply press the tab on the side of the alarm and the door will pop open.

Related Post:

Share
Tweet
Pin
Share