How To Change Battery Suunto Hr Belt?

As an Amazon Associate, I Earn From Qualifying Purchases.

Last Updated on September 23, 2022 by Ellis Gibson (B.Sc. in Mechanical Engineering)

If you’re like most people, you’ve probably had your share of frustrating experiences with dead batteries. You know the drill: you’re in the middle of something and your battery dies, leaving you unable to continue. It’s especially frustrating when it happens with your Suunto HR Belt, because it’s not always easy to change the battery. But don’t worry, we’re here to help. In this article, we’ll show you how to change the battery in your Suunto HR Belt, so you can get back to your workouts without any interruption.

So, how to change battery suunto hr belt?

To change your Suunto HR belt, you’ll need to remove the old one and then thread the new one through the slots on the back of the watch. Make sure that the new belt is tight enough that it won’t come off, but not so tight that it’s uncomfortable to wear.

Let’s dig into it and see if we can figure it out.

Step By Step Process On: How To Change Battery Suunto Hr Belt?

Here I will explain you step by step process of how to change battery suunto hr belt? let’s see how to change battery suunto hr belt.

REQUIRED TOOLS:

  1. Knife
  2. CR2032 battery
  3. CR2025 battery

Step-01:Open the HR belt

To begin, you will need to open up your HR belt. There is a small piece on the belt that needs to be removed in order to access the battery cover. Once you have removed this piece, you will see the battery cover behind it.

Step-02: Remove the battery cover

Use a knife or something similar to pop out the battery cover. Inside, you will see a CR2032 battery. It is recommended that you replace this battery with a CR2025 battery. The CR2032 batteries tend to last longer.

Step-03: Replace the battery

Once you have replaced the battery, make sure that the positive side is facing up. Then, put the cover back in place and press it down firmly. There is no wrong side to the cover, so you can put it back on the belt in any orientation.

Step-04: Close the HR belt

To close the HR belt, simply put the small piece back in place. Make sure that it is pushed in firmly so that it doesn’t come loose.

And that’s it! You have now successfully changed the battery in your Suunto HR belt.

If you wanted to watch a youtube video that shows you how to change battery suunto hr belt? I have included a video below:

How Do I Change The Battery In My Suunto Belt?

Are you the owner of a Suunto watch? If so, you may be wondering how to change the battery in your watch. Here are some simple instructions to help you out.

First, find a small Phillips head screwdriver. Next, locate the two small screws on the back of your watch. These screws hold the back of the watch in place.

Using your screwdriver, remove the two screws. Carefully remove the back of the watch. Inside, you will see the battery. Using a small coin, gently pry out the old battery.

Now, take your new battery and place it in the watch. Make sure that the positive side of the battery is facing up. Once the new battery is in place, replace the back of the watch and screw it in place.

Your watch should now be working again. If it isn’t, you may need to take it to a watch repair shop.

What Battery Does Suunto Heart Rate Monitor Take?

Your Suunto heart rate monitor uses a 3-volt lithium cell battery, which is also known as a CR 2025. This type of battery is common in many small electronic devices, such as watches, calculators, and key fobs. To replace the battery in your heart rate monitor, you will need to remove the Suunto Smart Sensor module from the chest strap. The module is located on the back of the strap, near the bottom. To remove it, simply unscrew the two screws that hold it in place. Once the module is removed, you will be able to access the battery compartment. Simply pop out the old battery and insert a new one in its place. Make sure the positive side of the battery (the side with the plus sign) is facing up. Screw the module back into place and you’re good to go!

Additionally, The Suunto Smart Heart Rate Belt uses a 3-Volt lithium cell (CR 2025). To replace the battery: Remove the Suunto Smart Sensor module from the chest strap. Turn the module over and unscrew the back cover. Remove the old battery and insert the new battery. Make sure the positive side of the battery is facing up. Screw the back cover on and reattach the module to the chest strap.

Why Is My Suunto Heart Rate Not Working?

If you’re a fitness enthusiast, there’s a good chance you’re using a heart rate monitor to track your progress and ensure you’re working hard enough to reach your goals. However, sometimes heart rate monitors can be temperamental, and you may find yourself wondering why your Suunto heart rate monitor isn’t working.

There are a few potential reasons why your Suunto heart rate monitor may not be working correctly. First, make sure that the electrodes on the heart rate monitor belt are wet. If they’re not, it’s possible that the monitor isn’t picking up your heart rate correctly.

Another potential reason why your Suunto heart rate monitor may not be working is that the belt isn’t tight enough. Heart rate monitors need to be snug against your chest in order to work properly, so if your belt is too loose, it may not be picking up your heart rate correctly.

If you’re still having trouble with your Suunto heart rate monitor, try contacting customer service for assistance.

Also, If the Suunto Smart Heart Rate Belt isn’t working, try making sure the contact areas are wet and the belt is tight against your chest.

How Do I Use The Suunto Hr Belt?

There’s no need to be intimidated by the Suunto HR belt – it’s actually quite simple to use! Just put it on so that it fits tightly and the Suunto logo is facing up. The belt turns on automatically when it detects a heart beat. TIP: Wear the belt against your bare skin for best results. Suunto Smart module sensor can also be used with Movesense compatible sports garment.

As well as that, Put the belt on so that it fits tightly and the Suunto logo is facing up. The belt turns on automatically when it detects a heart beat. TIP: Wear the belt against your bare skin for best results. Suunto Smart module sensor can also be used with Movesense compatible sports garment.

What Size Battery Does A Cr2032 3V Coin Cell Lithium Battery Have?

A CR2032 3V coin cell lithium battery has a diameter of 20 mm and a height of 3.2 mm.

What Size Battery Does A Cr2025 Fit?

A CR2025 coin cell battery is a 3 volt battery that is often used in small electronic devices, such as watches, calculators, and keyless entry remote controls. This battery size is also known as a 2025 battery.

Why Is My Suunto Heart Rate Monitor Not Working?

One possible reason why your Suunto heart rate monitor is not working is that the battery may be low. Try replacing the battery to see if that solves the problem. If not, then there may be an issue with the monitor itself.

Why Is My Suunto 9 Heart Rate Monitor Not Working?

The reason your Suunto 9 heart rate monitor is not working is most likely because the battery is dead. Try replacing the battery to see if that solves the problem.

How Can I Ensure That The Battery In My Suunto Hr Belt Is Always In Good Working Condition?

To ensure that the battery in your Suunto HR belt is always in good working condition, you should:

– Always use the charger that came with your device. – Only charge your device when the battery is low. – Keep the device and charger clean and free of debris. – Never leave your device charging for more than 24 hours. – If you’re not using your device for an extended period of time, discharge the battery completely and then store the device in a cool, dry place.

What Are Some Tips For Changing The Battery In My Suunto Hr Belt?

First, make sure that your Suunto HR belt is turned off. Next, remove the battery cover by gently prying it off with your fingernail. Once the cover is off, remove the old battery by gently pulling it out. Finally, insert the new battery into the slot, making sure that the plus side is facing up. Replace the battery cover, and your Suunto HR belt should be good to go!

What Are Some Common Problems That Can Occur When Changing The Battery In My Suunto Hr Belt?

Some common problems that can occur when changing the battery in my Suunto HR belt are:

-The watch may lose some of its data -The watch may not work as accurately -The watch may need to be reset

What Should I Do If I Experience A Problem With My Suunto Hr Belt After Changing The Battery?

If you experience a problem with your Suunto HR belt after changing the battery, you should contact Suunto customer service.

Is There Anything Else I Should Know About Changing The Battery In My Suunto Hr Belt?

In addition, be sure to check the water resistance of your watch before changing the battery.

Final Word

If your Suunto HR belt needs a new battery, don’t despair! With a few simple tools and a little know-how, you can change the battery yourself. Here’s how:

1. Remove the old battery. Use a small screwdriver to carefully pry out the old battery.

2. Insert the new battery. Make sure the new battery is inserted in the same orientation as the old one.

3. Replace the cover. Screw the cover back on, making sure it is snug and secure.

4. Test the new battery. Turn on your Suunto HR and make sure the new battery is working properly.

That’s all there is to it! With a new battery in place, your Suunto HR should be good as new.

FAQ

What Can I Do If My Suunto 7 Heart Rate Monitor Is Not Working?

If your Suunto 7 heart rate monitor is not working, you can try the following:

-Restart your watch and try again.

-Make sure the heart rate sensor is properly attached to your body.

-Check if the heart rate sensor is wet or dirty.

-Try using a different heart rate sensor.

Related Post:

Share
Tweet
Pin
Share