How To Change Battery Tcl Remote?

As an Amazon Associate, I Earn From Qualifying Purchases.

Last Updated on September 22, 2022 by Ellis Gibson (B.Sc. in Mechanical Engineering)

If you are like me, then you are probably always misplacing your TCL remote. And, when you finally find it, the battery is always dead. If you are sick of having to search high and low for your remote, only to find that the battery is dead, then this article is for you. In this article, I will show you how to change the battery in your TCL remote in just a few simple steps.

So, how to change battery tcl remote?

There isn’t a definitive answer, as it depends on the model of remote. However, in general, most TCL remotes use AA or AAA batteries. To change the batteries, first locate the battery compartment, which is usually on the back of the remote. Once you have found it, use a small screwdriver or other tool to open the compartment. Then, simply replace the old batteries with new ones, being sure to match the correct polarity. Finally, close the compartment and test the remote to see if it is working properly.

Let’s dig into it and see where it takes us.

Step By Step Process On: How To Change Battery Tcl Remote?

Here I will explain you step by step process of how to change battery tcl remote? let’s see how to change battery tcl remote.


  1. TCL Android Smart TV remote
  2. Two new batteries
  3. Back cover for the remote

Step-01:First of all, take the back cover off of the TCL Android smart TV remote. For this, hold the remote in your hand and press down on the back cover. The back cover should come right off.

Step-02: Once the back cover is off, you will see the batteries. There are two batteries, one on the top and one on the bottom. The battery on the top is the positive side and the battery on the bottom is the negative side.

Step-03: To change the batteries, simply take out the old batteries and put in the new ones. Make sure that the positive side is on the top and the negative side is on the bottom.

Step-04: Once the new batteries are in, simply put the back cover back on and press down until it snaps into place.

If you wanted to watch a youtube video that shows you how to change battery tcl remote? I have included a video below:

How Do I Take The Back Off My Tcl Remote?

There are a few different ways to take the back off of your TCL remote, depending on the model that you have. The most common way is to use a small screwdriver or a paperclip to remove the two screws that hold the back cover in place. Once the screws are removed, the back cover should come right off. If your remote has a battery compartment, you may need to remove the batteries before the back cover will come off.

Another way to take the back off of your TCL remote is to pry it off with a flathead screwdriver. This is not the recommended method, as it could damage your remote. However, if you are careful, you should be able to pry the back off without damaging it.

Once you have the back cover off, you should be able to see the circuit board and the batteries. If you need to replace the batteries, simply remove the old ones and insert new ones in their place. If you are having trouble getting the back cover off, consult the manual for your specific model of TCL remote.

How Do I Change The Battery In My Tcl Roku Remote?

If you find yourself asking this question, don’t worry, you’re not alone. Many people struggle with how to change the batteries in their TCL Roku remote. While it may seem like a difficult task, it’s actually quite simple. Here’s a step-by-step guide on how to do it:

1. Locate the battery cover on the back of the remote.

2. Using a small object like a paperclip or a toothpick, gently pry open the battery cover.

3. Remove the old batteries from the remote.

4. Insert new batteries into the remote, making sure to match the positive (+) and negative (-) ends.

5. Close the battery cover and you’re done!

We hope this guide was helpful. If you have any other questions about your TCL Roku TV or remote, feel free to reach out to us on social media or our support website.

How Do I Open The Back Of My Roku Remote?

If you’re like most people, you probably don’t think too much about the little black remote that comes with your Roku player. But did you know that there’s a little secret compartment hidden on the back of the remote? Here’s how to open it:

Press and hold the black tab above the battery compartment. While holding down the tab with your left hand, slide down the battery compartment cover with your right hand to remove it.

You’ll now see a small hole in the back of the remote. This is where you can insert a paperclip or other small object to reset the remote if it ever gets out of sync with your Roku player.

So there you have it! The next time you’re looking for a paperclip, don’t forget to check the back of your Roku remote!

Furthermore, To open the battery compartment on your remote control, press and hold the black tab above the compartment. While holding down the tab with your left hand, slide the compartment cover down with your right hand to remove it.

How Do You Change The Batteries In A Smart Tv Remote?

If you’re like most people, you probably don’t think about the batteries in your TV remote control until they stop working. Then you’re left scrambling to find a replacement, which can be a pain.

If you have a smart TV, the process of changing the batteries in your remote is a little different. But don’t worry, it’s still pretty easy.

Here’s a step-by-step guide to changing the batteries in your smart TV remote:

1. Locate the battery cover. This is usually on the back of the remote.

2. Remove the cover. This will expose the batteries.

3. Remove the old batteries.

4. Insert the new batteries. Make sure they are inserted correctly.

5. Replace the cover.

6. Test the remote.

And that’s it! Now you know how to change the batteries in your smart TV remote.

How To Remove Battery From Tcl Phone?

First, locate the battery cover on the back of your TCL phone. Second, remove the battery cover by sliding it off. Third, remove the battery by gently pulling it out.

What Is The Average Battery Size For A Tcl Remote Control?

The average battery size for a TCL remote control is CR2032. This size is commonly used in many small electronic devices.

What Is Tcl Remote App?

There is not enough information provided to answer the question.

Can I Replace The Battery In My Haier Tv Remote?

Yes, you can replace the battery in your Haier TV remote.

How To Remove The Back Of My Remote To Replace Batteries?

To remove the back of your remote to replace batteries, first locate the battery compartment. Once you have found the battery compartment, use a small Phillips head screwdriver to remove the screws. After the screws have been removed, the back of the remote should come off easily. If it does not, check to see if there are any other screws that need to be removed.

How Can You Extend The Life Of Your Tcl Remote Battery?

You can extend the life of your TCL remote battery by following these simple tips:

-Avoid exposing the battery to extreme temperatures. -Remove the battery from the remote when it is not in use. -Avoid letting the battery become completely discharged.

What Are Some Things To Avoid When Changing The Battery In A Tcl Remote?

When changing the battery in a TCL remote, avoid getting the battery wet, dropping the battery, or leaving the battery in the remote for too long.

What Should You Do If Your Tcl Remote Isn’T Working After You Change The Battery?

If your TCL remote isn’t working after you change the battery, you should replace the batteries.

Final Word

If your TCL remote has stopped working, it may be time to change the battery. Here’s a quick and easy guide on how to do just that:

1. Start by removing the back cover of the remote. This will expose the battery compartment.

2. Next, remove the old battery from the compartment.

3. Now, insert the new battery into the compartment. Be sure to orient it correctly so that the positive and negative terminals match up.

4. Finally, replace the back cover and you’re all set!

Your TCL remote should now be working properly. If it’s still not working, you may need to consult the user manual or contact customer support.


How To Use Tcl Remote Control?

To use Tcl remote control, first connect the Tcl remote to the TV. Next, use the TV remote to select the input that the Tcl remote is connected to. Finally, point the Tcl remote at the TV and press the appropriate button to control the TV.

What Is The Best Tcl Remote Replacement?

There is no best Tcl remote replacement, but many Tcl enthusiasts prefer to use the Tclkit because it is small and easy to use.

What Could Be Causing My Tcl Remote To Stop Working?

There are a few things that could be causing your TCL remote to stop working. It could be a problem with the batteries, the remote itself, or the TV.

How Do Tcl Aaa Batteries Compare To Other Aaa Batteries On The Market?

In addition, TCL batteries AAA can be used in a variety of devices.

Related Post: