How To Change Battery Vf Commodore Key?

As an Amazon Associate, I Earn From Qualifying Purchases.

Last Updated on September 22, 2022 by Ellis Gibson (B.Sc. in Mechanical Engineering)

If you’re like most people, you probably don’t know how to change the battery in your vf commodore key. Don’t worry, it’s not as difficult as it sounds. With a little bit of know-how, you can easily change the battery in your vf commodore key. In this article, we’ll show you how to change the battery in your vf commodore key. We’ll also provide some tips on how to prolong the life of your vf commodore key.

So, how to change battery vf commodore key?

1. Locate the battery cover on the back of the key.

2. Pry open the battery cover with a small flathead screwdriver or a fingernail.

3. Insert a new battery into the key, making sure that the positive ( + ) side is facing up.

4. Replace the battery cover and snap it into place.

5. Test the key to make sure that the new battery is working.

Let’s dig into it and see what secrets it holds.

Step By Step Process On: How To Change Battery Vf Commodore Key?

Here I will explain you step by step process of how to change battery vf commodore key? let’s see how to change battery vf commodore key.

REQUIRED TOOLS:

  1. Small screwdriver
  2. Old battery
  3. New battery
  4. Locks

Using a small screwdriver, pry off the cover on the back of the key fob to expose the battery.

-On the first key fob style, the battery is located behind a cover at the back and bottom of the fob.

-On the second key fob style, the battery is located in the same location, but there is a small screwdriver.

-Remove the old battery and note the lip that the battery is tucked under.

-Slip the new battery in against the metal connections toward the bottom of the fob and under the plastic lip.

-If there is a backing on the new battery, peel it off.

-Snap the cover back into place with either fob. It should only go on one way.

-Test the locks and you should be good to go!

If you wanted to watch a youtube video that shows you how to change battery vf commodore key? I have included a video below:

What Battery Goes In A Commodore Key?

Do you have a Holden Commodore car key remote? If so, you may be wondering what battery goes in it. The good news is that you don’t have to worry about that, because the CR2032 battery is the perfect fit.

This battery is often used in key fobs and other small electronic devices, and it’s easy to find at most stores. Plus, it’s affordable and will last for a long time. So, if you need to replace the battery in your Holden Commodore car key remote, the CR2032 is the way to go.

Furthermore, The Holden Commodore is a car that uses a remote to lock and unlock the doors. The remote uses batteries, and when they run out, you have to replace them. You can buy the batteries online and have them shipped to you for free.

How Do I Start A Vf Commodore With A Key?

If you are having trouble starting your VF Commodore with a key, there are a few things you can try. First, make sure that the key is inserted all the way into the ignition. Sometimes the key will only go in part of the way, and this can prevent the car from starting. If the key is inserted all the way and the car still won’t start, try turning the key to the “on” position and then back to the “off” position a few times. This sometimes clears any electronic issues that may be preventing the car from starting. If the car still won’t start, you may need to have it towed to a mechanic to have it checked out.

How Do You Program A Holden Commodore Key?

If you’re looking to program a Holden Commodore key, there are a few things you’ll need to know. First, you’ll need to have all the keys you want to program on hand. You’ll also need a scan tool, which you can usually find at your local auto parts store.

Once you have everything you need, the programming process is fairly straightforward. Just follow the prompts on the scan tool, and make sure to turn the ignition on and off as instructed. After you’ve programmed all the keys you want, you’re all set!

As well as that, In order to program all of the transponder keys for a vehicle, you first have to select the “programming” option on the scan tool. Then, you have to read and accept the disclaimer before continuing. Once you do that, you have to press the F1, F2, F3, and F4 keys on the scan tool. After that, you have to turn the ignition on and press the “enter” key. Please note that all keys that were programmed before will have to be programmed again or they will be deleted from the system.

Where Is The Battery In A Vf Commodore?

This is a question that we get asked a lot here at the Commodore Workshop. The battery in a VF Commodore is located in the engine bay, on the passenger side. It is located under the plastic cover that is held in place by two 10mm bolts.

What Is The Vf Commodore Key Battery Voltage?

The VF Commodore key battery voltage is 3 volts.

How Do I Replace The Key Button On My Vf Commodore?

If you have a VF Commodore, you may have noticed that the key button is missing. This is because the key button is actually a separate piece that can be replaced.

To do this, you will need to purchase a new key button from a Holden dealer or an aftermarket supplier. Once you have the new key button, simply follow these steps:

1.Using a small flat-head screwdriver, gently pry off the old key button.

2.Remove the old key button from the key fob.

3.Slide the new key button into the key fob.

4.Snap the new key button into place.

Your VF Commodore should now have a new key button!

How Do I Replace The Battery On A Vf Commodore?

To replace the battery on a VF Commodore, you will need to:

1. open the bonnet

2. disconnect the negative terminal of the battery

3. disconnect the positive terminal of the battery

4. remove the battery

5. install the new battery

6. connect the positive terminal of the battery

7. connect the negative terminal of the battery

8. close the bonnet

How To Change The Battery In A Holden Commodore Key?

To change the battery in a Holden Commodore key, first locate the small release button on the back of the key. Press the release button and slide the cover off the key. Inside the key, you will find the battery. To remove the old battery, simply pry it out with a flathead screwdriver. To install the new battery, insert it into the key and snap the cover back into place.

Can I Change The Battery In My Vf Commodore Key Myself?

Yes, you can change the battery in your VF Commodore key yourself. However, it is important to note that you should only attempt to do so if you are confident in your ability to do so. Additionally, if you are not comfortable with changing the battery yourself, you can always take the key to a local dealership or locksmith and have them change the battery for you.

Do I Need To Take My Vf Commodore Key To A Dealer Or Locksmith To Have The Battery Changed?

No, you don’t need to take your VF Commodore key to a dealer or locksmith to have the battery changed. You can do it yourself by following these steps:

How Much Does It Cost To Have The Battery In My Vf Commodore Key Changed?

It costs around $100 to have the battery in my VF Commodore key changed.

I Think The Battery In My Vf Commodore Key Is Dead, But The Key Still Works. Is This Normal?

Yes, this is normal. The key still works because it is using a wireless signal to communicate with the car. The battery in the key just provides power to that wireless signal.

I Think The Battery In My Vf Commodore Key Is Dead, And Now The Key Doesn’T Work. What Should I Do?

First, check the battery in your VF Commodore key to see if it is dead. If it is, then you should replace it with a new one. If the key still doesn’t work, then you should take it to a locksmith or a dealership to have it checked out.

Final Word

Thanks for reading! We hope this guide was helpful in explaining how to change the battery in your VF Commodore key. For more helpful tips and tricks, be sure to check back soon!

FAQ

Can You Replace The Battery In A Vf Commodore Key Fob?

Yes, the battery in a vf commodore key fob can be replaced.

What Is The Key Battery Type For A Ve Commodore?

The key battery type for a ve commodore is a CR2032 battery.

Related Post:

Share
Tweet
Pin
Share