How To Change Gba Battery?

As an Amazon Associate, I Earn From Qualifying Purchases.

Last Updated on September 22, 2022 by Ellis Gibson (B.Sc. in Mechanical Engineering)

If your Game Boy Advance won’t hold a charge, it might be time to replace the battery. This guide will show you how to replace the battery in your Game Boy Advance. You will need a Phillips #00 screwdriver and a small flat-head screwdriver.

So, how to change gba battery?

To replace the battery in a Game Boy Advance cartridge, you will need a small Phillips screwdriver and a soldering iron.

1. Remove the four screws from the back of the cartridge using the Phillips screwdriver.

2. Carefully remove the back plate, being careful not to damage the circuit board.

3. Locate the battery on the circuit board. It will be a small, silver-colored rectangle.

4. Using the soldering iron, carefully remove the two wires that are attached to the battery.

5. Insert the new battery, making sure that the positive and negative terminals are aligned correctly.

6. Solder the two wires back onto the new battery.

7. Replace the back plate and screw it into place.

Let’s dig into it and see where it takes us.

Step By Step Process On: How To Change Gba Battery?

Here I will explain you step by step process of how to change gba battery? let’s see how to change gba battery.

REQUIRED TOOLS:

  1. Tri-wing screwdriver
  2. Flux
  3. Soldering Iron
  4. Plastic tweezers or scalpel tool
  5. Desolder braid
  6. Isopropyl alcohol
  7. Cotton swabs
  8. New CR2032 coin cell battery

Step-01:

Start by removing the PCB from the cartridge shell. To do this, remove the tri-wing screw from the back of the cartridge. Then, slide down the front of the cartridge shell and pull it away. Finally, remove the PCB inside.

Step-02:

Next, prep the cartridge battery tabs with some flux to clean off surface oxidation. Then, use your soldering iron (in conjunction with some plastic tweezers or a scalpel tool) to melt the solder joints on the tabs and lift the old battery away from the PCB.

Step-03:

With the old battery now gone, apply some more flux to the remaining solder joints and then use your iron and some desolder braid to remove all of the old solder from the pads.

Step-04:

Once you’ve removed as much of the old solder as you can, use some isopropyl alcohol and cotton swabs to clean the residue left behind.

Step-05:

Now it’s time to install the new battery. Prep the cleaned pads on the PCB with some fresh flux, because of the orientation of the save battery over the mask ROM chip on the PCB it’s helpful to slightly bend the tabs on the new battery downwards so that they’ll be in closer contact with the pads on the board.

Step-06:

With the legs on the new cell now bent, place the new battery onto your game PCB in the proper orientation with the positive tab of the battery connecting to the positive battery pad on the PCB as shown here. Then, use your iron to heat each pad in corresponding tab and add some solder.

Step-07:

Once the new battery is in place, apply some more alcohol and clean up the flux residue from your game board with the cotton swab. Also use this time to clean the slot connector pins of your cartridge as well since they’re easy to clean this way.

Step-08:

All that’s left is to reassemble your cartridge in its shell. Place the PCB in the back half and slide the front half on over it. Then, reinsert and secure the single screw in the back of the cartridge.

Step-09:

Your game boy advance game cartridge now has a new battery. Once a new battery is installed you should test it to see if your save data stays on the cartridge now. For

If you wanted to watch a youtube video that shows you how to change gba battery? I have included a video below:

Can You Change The Battery On Gba Game?

No, you cannot change the battery on a GBA game. The battery is sealed inside the cartridge and cannot be replaced.

How Do You Change The Battery In A Gba Without Soldering?

If you’re wondering how to change the battery in a GBA without soldering, the answer is actually quite simple. All you need is a small Phillips head screwdriver and a replacement CR2032 coin cell battery.

First, use the screwdriver to remove the four screws from the back of the GBA. Next, carefully remove the back cover, being careful not to lose any of the small springs or other components.

Once the back cover is off, you’ll see the battery compartment. Simply remove the old battery and insert the new one, making sure that the positive (+) side is facing up.

Replace the back cover and screw it back on, and you’re all done! Your GBA should now have a new battery and be good as new.

What Happens If A Gba Battery Dies?

When the battery in your Gameboy Advance dies, it means two things for your gaming experience. First, any games you have in progress will no longer be able to save, so you’ll have to start over from your last save point. Second, any games you have already beaten and saved will also be lost; you’ll have to beat them again if you want to play them.

However, it’s important to note that, while the battery is dead, you can still play games on your Gameboy Advance. They just won’t be saved. So if you’re willing to sacrifice your progress, you can still get some enjoyment out of your old games.

Of course, if you’re planning on playing any of your Gameboy Advance games for the long term, you’ll want to get a new battery. The lifespan of a Gameboy Advance battery is only a few years, so if your console is more than a few years old, it’s likely that the battery is already dead. Fortunately, they’re not too expensive to replace.

An additional, The battery in a Gameboy Advance console powers the games and allows them to save. When the battery dies, the games can no longer be saved and any previous saved games are lost. However, as long as the console has power, you can still save the game. The Gameboy Advance has been around for many years, so the battery might not last much longer.

How Long Does A Gba Battery Last?

How long does a GBA battery last?

This is a question that is often asked, and unfortunately, there is no easy answer. The average battery life is approximately 15 hours when playing Game Boy Advance games. This is somewhat less when playing Game Boy Color or Game Boy (original) games. Battery life can also vary depending on the Game Pak being used and the volume setting (louder=less play time).

There are a few things that you can do to help extend the life of your GBA battery. First, make sure that the unit is turned off when not in use. Also, avoid leaving the GBA in direct sunlight or in excessively hot or cold environments. And finally, if you are not planning on using the unit for an extended period of time, it is best to remove the batteries altogether.

With proper care, your GBA should give you many hours of enjoyment. So go out and have fun, and don’t worry too much about the battery life.

Moreover, When playing Game Boy Advance games, the average battery life is approximately 15 hours. When playing Game Boy Color or Game Boy (original) games, the average battery life is somewhat less. Battery life can also vary depending on the Game Pak being used and the volume setting (louder=less play time).

How Do You Replace A Gameboy Advance Cartridge Battery Without Soldering?

There are a few ways to replace a gameboy advance cartridge battery without soldering. One way is to use a battery replacement kit. These kits usually come with a new battery, a battery cover, and instructions. Another way is to find a tutorial online or in a gaming forum that will show you how to replace the battery without soldering.

Where Can I Purchase A Gba Cartridge Battery Holder?

There are a few places you can purchase a GBA cartridge battery holder. One option is to purchase it online through a site like Amazon. Another option is to purchase it through a local video game store. Finally, you could try to find one through a local electronics store.

How Do I Replace The Battery In A Gba Sp?

To replace the battery in a GBA SP, you will need a screwdriver and a new CR2032 battery. First, remove the back cover of the GBA SP by unscrewing the two screws on the back. Next, use the screwdriver to remove the battery cover by unscrewing the two screws on the cover. Once the cover is removed, take out the old battery and replace it with the new battery. Finally, screw the battery cover back on and screw the back cover back on.

How Long Does The Average Gba Cartridge Battery Last?

The average GBA cartridge battery lasts for about 10 hours. However, this may vary depending on the game and how often you play it. If you play your GBA regularly, you may need to replace the battery more often.

Can You Change The Battery Without Voiding The Warranty?

Yes, you can change the battery without voiding the warranty, but you’ll need to take the phone to a certified technician to do so. The battery is not a user-replaceable part, so if you attempt to change it yourself, you could damage the phone or void the warranty.

Is It Difficult To Change The Battery?

No, it is not difficult to change the battery. You will need a screwdriver to remove the back cover, and then you can simply pop the old battery out and replace it with a new one.

What Are Some Tips For Changing The Battery?

There are a few things to keep in mind when changing a battery:

– Make sure the new battery is compatible with your device. – If possible, discharge the old battery before replacing it. – Be careful not to damage the device when replacing the battery.

How Do You Properly Dispose Of The Old Battery?

There are a few things you need to do when disposing of an old battery. First, you need to find out if the battery is rechargeable or not. If it is, you need to discharge it completely before disposing of it. You can do this by using it until it is completely dead. Once it is discharged, you need to remove the battery from the device it is in.

Next, you need to find out what type of battery it is. There are three main types of batteries: lead-acid, nickel-cadmium, and lithium-ion. Each type has a different way of being disposed of. Lead-acid batteries need to be taken to a recycling center. Nickel-cadmium batteries need to be taken to a special recycling center. Lithium-ion batteries can be disposed of in the regular trash.

After you have determined what type of battery it is, you need to properly package it. You don’t want the battery to leak, so make sure it is wrapped tightly in plastic. You also want to label the battery so that anyone who finds it knows what it is and how to properly dispose of it.

Once the battery is properly packaged, you can dispose of it in the appropriate way. Lead-acid and nickel-cadmium batteries need to be taken to special recycling centers. Lithium-ion batteries can be thrown away in the regular trash.

What Do You Do If The Gba Won’T Turn On After Changing The Battery?

If the Game Boy Advance won’t turn on after changing the battery, the first thing you should do is check the battery to make sure it’s properly seated. If the battery is loose, try tightening the battery compartment cover. If the battery is properly seated and the Game Boy Advance still won’t turn on, try resetting the device by pressing the reset button. If the Game Boy Advance still won’t turn on, the problem may be with the power supply. Try plugging the device into a different outlet to see if that solves the problem. If none of these solutions work, the Game Boy Advance may need to be serviced.

Final Word

The Nintendo Game Boy Advance is a handheld video game console that was released in 2001. It uses removable cartridges that contain batteries to power the console. The batteries in these cartridges can die after a few years, and when they do, the console will no longer work.

To replace the batteries in a Game Boy Advance cartridge, you will need a small screwdriver, a pair of pliers, and a replacement CR2032 battery. First, use the screwdriver to remove the screw from the back of the cartridge. Next, use the pliers to carefully pull the old battery out of the cartridge. Finally, insert the new battery into the cartridge and screw the back of the cartridge back on.

If you have a dead battery in your Game Boy Advance cartridge, don’t despair! With a little bit of effort, you can replace it yourself and get your console working again.

FAQ

What Is The Cr1616 Battery Gameboy?

The cr1616 battery is a gameboy battery that is used to power up the device. It is a lithium ion battery that is rechargeable and has a capacity of 3.7 volts.

How To Gba Battery Mod?

If you want to mod your Game Boy Advance to use AA batteries, you’ll need to follow these steps:

1. Start by opening up the GBA. You’ll need to remove the battery cover and unscrew the four screws that hold the back plate in place.

2. Once the back plate is removed, you’ll be able to access the GBA’s innards. Locate the battery compartment and disconnect the battery connector.

3. Cut two pieces of electrical tape, each about 3 inches long.

4. Wrap one piece of tape around the positive terminal of the battery connector, and the other around the negative terminal.

5. Cut two more pieces of electrical tape, each about 6 inches long.

6. Wrap one of these pieces of tape around the positive terminal of an AA battery, and the other around the negative terminal.

7. Connect the AA battery to the battery connector, making sure that the positive and negative terminals are lined up correctly.

8. Screw the back plate back onto the GBA, and replace the battery cover.

Your GBA should now be able to run on AA batteries!

What Is The Cr2025 Gameboy Battery?

The cr2025 gameboy battery is a 3 volt coin-type battery that is used in some gameboys. It is also known as a CR2032 battery. This battery is used to power the gameboy’s LCD screen.

Related Post:

Share
Tweet
Pin
Share