Change Relic Watch Battery: Easy Step-by-Step Replacement Methods And Tips [Updated On- 2025]

To change a Relic watch battery, use a watch wrench to loosen the back casing. Remove the old battery with tweezers. Insert a new battery, either CR2430 or type 377, depending on your model. Carefully replace the back casing. For detailed instructions, contact Customer Care with your watch’s style number for clarity and accuracy.

Next, identify the battery inside. Carefully note its orientation before removing it. Insert the new battery in the same orientation as the original. After placing the battery, reattach the back cover securely. Ensure it clicks into place to protect the internal mechanism.

If you encounter difficulty during the process, consider referring to your watch’s manual for specific instructions. Also, take care to avoid touching the battery terminals, as this may affect performance.

Now that you know how to change a Relic watch battery, you may wonder about additional maintenance tips. Maintaining the watch regularly can extend its life and ensure accurate timekeeping. In the following section, we will explore essential care techniques that complement battery changes and keep your watch in optimal condition.

# Table of Contents

What Tools Do You Need for Changing a Relic Watch Battery?

To change a Relic watch battery, you need specific tools to ensure a smooth and effective process.

Essential Tools for Changing a Relic Watch Battery:
1. Small Phillips screwdriver
2. Case back opener (or a knife)
3. Tweezers
4. New watch battery (typically a CR2032 or similar)
5. Clean cloth
6. Magnifying glass (optional)

Transitioning from the list to detailed explanations, it’s important to understand how each tool contributes to changing the battery safely and effectively.

1. Small Phillips Screwdriver:
A small Phillips screwdriver is essential for removing the screws that hold the watch case back in place. Many Relic watches use screws instead of a snap-on back, making this tool necessary for battery access. Using an appropriately sized screwdriver minimizes the risk of stripping the screws, which can complicate battery replacement.

2. Case Back Opener:
A case back opener is used to safely pry off the watch case back without causing damage. Some Relic watch models may have a screw-down case back that requires a designated tool to open. This tool provides leverage without scratching or damaging the watch.

3. Tweezers:
Tweezers play a critical role in handling small components within the watch, such as the battery. They allow for precise placement and removal of the battery without risking damage to delicate parts. Using tweezers can help avoid short-circuiting the battery with your fingers.

4. New Watch Battery:
A new watch battery, such as a CR2032, is crucial for ensuring your watch operates correctly. It’s important to use the correct battery type specified by the manufacturer. Invalid batteries can lead to malfunction or excessive wear on the watch.

5. Clean Cloth:
A clean cloth helps maintain the watch’s cleanliness during the replacement process. Cleaning the watch surface prevents dirt and oils from entering the casing, which could affect the movement. Using a clean cloth also protects the glass from scratches while you work on the battery.

6. Magnifying Glass (optional):
A magnifying glass can be useful to closely inspect small parts and ensure everything is correctly aligned during the battery replacement process. This tool is especially helpful for those with vision difficulties or when working in poorly lit environments.

Overall, having the right tools is vital for changing a Relic watch battery. Each tool serves a specific purpose, contributing to the overall success of the battery replacement process while ensuring the integrity of the watch is maintained.

How Can You Identify the Battery Type Needed for Your Relic Watch?

To identify the battery type needed for your Relic watch, you can check the owner’s manual, inspect the watch case back, or consult a jeweler or watch technician.

The owner’s manual is a reliable source for battery specifications. It usually lists the exact battery type suitable for your specific watch model. If you do not have the manual, you can often find it online on the manufacturer’s website, which provides detailed product information.

Inspecting the watch case back is another effective method. Most Relic watches have a model number engraved on the back. You can use this number to look up the correct battery type online. Additionally, if the case is easily accessible, you may find the battery reference printed inside.

Consulting a jeweler or watch technician is a practical approach if you prefer professional assistance. Experts can quickly identify the appropriate battery type and handle the replacement. They have the experience to ensure the process is done correctly without damaging the watch.

In conclusion, utilizing these options will help you accurately identify the battery type necessary for your Relic watch, ensuring proper functioning and longevity.

What Are the Safe Steps to Open a Relic Watch Case for Battery Access?

The safe steps to open a Relic watch case for battery access include gathering the right tools, using proper techniques, and handling the watch carefully.

Gather necessary tools: case opener, tweezers, and a soft cloth.
Identify case type: snap-back, screw-down, or quartz models.
Remove the back cover: apply correct technique based on case type.
Handle the battery: observe polarity and avoid touching with metal.
Replace and secure: insert a new battery and ensure the cover is fastened properly.

Following these steps will help ensure safe battery replacement and avoid damaging the watch.

Gather Necessary Tools: The first step to opening a Relic watch case for battery access involves gathering tools like a case opening knife, tweezers, and a soft cloth. A case opening knife allows you to gently pry open the watch back without scratching it. Tweezers assist in battery handling, while a soft cloth protects surfaces from scratches.
Identify Case Type: Knowing the specific type of watch case is crucial. Relic watches may have snap-back cases or screw-down cases. Snap-back cases typically can be pried open, while screw-down cases need careful unscrewing. This identification determines the appropriate technique.
Remove the Back Cover: When removing the back cover, employ the correct technique based on the identified case type. For snap-back cases, wedge the knife between the case and the back cover. For screw-down cases, use the appropriate screwdriver to unscrew the back gently. This step mitigates damage to the watch.
Handle the Battery: When handling the battery, observe its polarity and avoid touching the contacts with metal tools. This helps prevent short circuits and prolongs battery life. Many watch batteries are small, so using tweezers ensures careful placement.
Replace and Secure: After placing the new battery, the final step is ensuring the back cover is securely fastened. For snap-back cases, press firmly until it clicks. For screw-down backs, ensure screws are tightened properly to avoid dust or moisture entering the watch.

Following these detailed steps creates a safer environment for battery replacement, preserving the watch’s functionality and appearance.

How Do You Remove the Old Battery Safely from Your Relic Watch?

To remove the old battery safely from your Relic watch, follow these steps: gather the necessary tools, open the watch case, carefully remove the old battery, and replace it with a new one.

Gather the necessary tools: You will need a small screwdriver, a case knife, or a plastic opening tool. These tools help you access the watch case without damaging it. A magnifying glass can also be useful for seeing small components.
Open the watch case: Use the small screwdriver or case knife to gently pry open the watch back. Insert the tool into the notch around the case back and twist gently. If your watch has screws, carefully remove them first using the screwdriver. Always be cautious to avoid scratching or damaging the watch.
Remove the old battery: Once the case is open, locate the battery. Take note of how it is seated. Use the plastic opening tool to lift the battery out gently. Avoid using metal tools, as they can cause short circuits or damage to the battery compartment.
Replace the battery with a new one: Check the old battery for its type, usually indicated by a code (e.g., SR626SW). Purchase a compatible replacement. Insert the new battery into the compartment in the same orientation as the old one. Ensure it is secured properly.
Close the watch case: After replacing the battery, carefully align the watch back and press it down firmly. If your watch has screws, replace them, ensuring they are tightened appropriately. Check that the watch is functioning before wearing it again.

Following these steps ensures a safe and effective battery replacement, maintaining your Relic watch’s functionality while preventing damage.

What Precautions Should You Observe When Installing a New Battery?

When installing a new battery, several precautions are crucial for safety and efficiency.

Wear protective gear, such as gloves and goggles.
Disconnect the old battery properly.
Avoid short-circuiting the battery terminals.
Handle the battery with care to prevent spills or leaks.
Ensure proper disposal of the old battery.
Check the compatibility of the new battery with your device.
Follow the manufacturer’s installation instructions.

By taking these precautions, you can significantly reduce risks associated with battery installation.

Wearing Protective Gear: Wearing protective gear, such as gloves and goggles, protects you from potential chemical splashes or battery acid exposure. Batteries can contain corrosive materials, making safety gear essential. According to the Consumer Product Safety Commission (CPSC), over 3,000 battery-related injuries happen annually due to improper handling.
Disconnecting the Old Battery Properly: Disconnecting the old battery is vital to prevent electrical shocks or damages. Always remove the negative terminal first and then the positive terminal to ensure electrical safety. This practice minimizes the chances of causing a short circuit while removing the battery.
Avoiding Short-Circuiting the Battery Terminals: A short circuit occurs when the positive and negative terminals connect directly, causing excessive current flow. This can lead to overheating, or even explosions. Keeping tools away from the battery terminals and working carefully will help avoid this situation.
Handling the Battery with Care: Batteries are heavy and can leak harmful chemicals if dropped. Make sure to lift them properly and use both hands. For example, the California Department of Public Health reports that mishandling batteries can lead to serious chemical burns.
Ensuring Proper Disposal of the Old Battery: Batteries often contain toxic materials that can harm the environment when disposed of incorrectly. Check local regulations for battery recycling or disposal options. The EPA emphasizes the importance of proper battery disposal to prevent hazardous waste in landfills.
Checking Compatibility of the New Battery: Using the wrong battery can damage the device. Always ensure that the new battery matches the specifications of the old one. Referencing the user manual or the manufacturer’s website can provide necessary compatibility information.
Following Manufacturer’s Installation Instructions: Each battery and device may have specific installation guidelines. Following these instructions ensures correct placement and minimizes risks. Manufacturers often include important safety tips for handling and installing their batteries.

By considering these precautions, you can safely complete the battery installation process and maintain the longevity of the electronic device.

How Can You Properly Close the Relic Watch Case After Replacement?

To properly close the Relic watch case after battery replacement, you must ensure that the case is aligned, secure, and free of debris. Follow these detailed steps for the best results:

Align the Case Back: Place the case back in the correct position over the watch case. Look for notches or grooves that ensure proper alignment. Misalignment can lead to damage or moisture intrusion.
Check the Gasket: Inspect the gasket (the rubber or silicone ring) for any wear or dirt. A clean, intact gasket is essential for maintaining water resistance. Replace it if damaged.
Applying Pressure: Firmly press down on the case back while it is aligned. Use your hands or a soft tool to avoid scratching the case. Even pressure is key to achieving a secure closure.
Securing the Case Back: If your watch uses screws, use a screwdriver to tighten them. Ensure to follow a star pattern if multiple screws are present to distribute pressure evenly.
Test the Seal: After closing, check for any gaps between the case back and the watch body. Gaps indicate that the case may not be properly sealed.
Function Test: Wind the watch or use the settings to ensure it functions correctly after reassembly. Confirm that the timekeeping is accurate and that all features operate as intended.

Taking these steps helps ensure your Relic watch remains functional and protected from environmental elements. Regular maintenance and attention to detail can extend the life of your timepiece.

What Maintenance Tips Are Essential After Changing a Relic Watch Battery?

To maintain a relic watch effectively after changing its battery, it’s essential to follow proper care practices.

The key maintenance tips to consider are:
1. Clean the watch regularly.
2. Avoid exposure to extreme temperatures.
3. Store the watch properly when not in use.
4. Check the water resistance.
5. Monitor battery life and performance.
6. Seek professional servicing as needed.
7. Keep the watch serviced regularly.

These maintenance tips are crucial for preserving the longevity and functionality of your relic watch after a battery change.

Cleaning the Watch Regularly: Cleaning the watch regularly helps remove dirt and oils that can accumulate over time. Use a soft, lint-free cloth to gently wipe the exterior. For deeper cleanings, consider a professional jewelry cleaner that is safe for your watch material.
Avoiding Exposure to Extreme Temperatures: Extreme heat or cold can damage internal components of the watch. Ensure your watch is not exposed to high temperatures, such as direct sunlight or sources of heat, and avoid extreme cold, which could alter the battery’s performance.
Storing the Watch Properly: When not in use, store your relic watch in a protective case. This helps prevent scratches and exposure to humidity, which can be harmful to the watch’s mechanism over time.
Checking the Water Resistance: Ensure that the water resistance feature of the watch is intact. If the watch has been opened for a battery change, it may require a pressure test or resealing to maintain its water resistance.
Monitoring Battery Life and Performance: After changing the battery, observe how the watch performs. If it starts running slow or stops unexpectedly, it may indicate an issue with the battery installation or the watch’s inner mechanics.
Seeking Professional Servicing as Needed: If you notice any irregularities or if the watch requires cleaning beyond your capabilities, seek help from a professional watchmaker. Regular inspection by a qualified technician is advised.
Keeping the Watch Serviced Regularly: Schedule periodic maintenance with a watch professional. This can include cleaning, lubrication of moving parts, and verification of battery performance, ensuring the watch runs optimally for years to come.

Related Post: