How To Change The Battery In A Honda Key Fob?

As an Amazon Associate, I Earn From Qualifying Purchases.

Last Updated on September 19, 2022 by Ellis Gibson (B.Sc. in Mechanical Engineering)

If your Honda’s key fob remote is not working as it should, it may need a new battery. In this article, we’ll show you how to change the battery in a Honda key fob. You’ll need a new battery, a small Phillips head screwdriver, and a few minutes of time. With these simple tools and instructions, you’ll have your Honda’s key fob working like new in no time.

So, how to change the battery in a honda key fob?

If your Honda key fob remote is not working properly, it may be time to change the battery. Here is a step-by-step guide on how to change the battery in a Honda key fob remote.

1. Start by removing the key from the key fob.

2. Use a small flat head screwdriver to pry open the key fob.

3. Once the key fob is open, you will see the battery inside.

4. Use a small Phillips head screwdriver to remove the battery retaining screw.

5. Carefully remove the old battery and replace it with a new CR2032 battery.

6. Replace the battery retaining screw and close the key fob.

7. Test the key fob to make sure the new battery is working.

Let’s dig into it and see if we can get to the bottom of it.

Step By Step Process On: How To Change The Battery In A Honda Key Fob?

Here I will explain you step by step process of how to change the battery in a honda key fob? let’s see how to change the battery in a honda key fob.

REQUIRED TOOLS:

  1. Small flathead screwdriver
  2. Small pair of pliers
  3. New CR2032 battery

Step-01:First, locate the battery cover on the back of your key fob. The cover is usually held in place with a small screw or tab.

Step-02:

Once you have located the cover, use a small flathead screwdriver or your fingernail to pry it off.

Step-03:

With the cover off, you should now see the battery. Using your fingers or a small pair of pliers, gently remove the old battery.

Step-04:

Now it’s time to install the new battery. Make sure the positive (+) side is facing up and gently insert it into the key fob.

Step-05:

Once the new battery is in place, replace the cover and screw or tab to secure it.

That’s it! You’ve now successfully replaced the battery in your Honda key fob.

If you wanted to watch a youtube video that shows you how to change the battery in a honda key fob? I have included a video below:

What Kind Of Battery Does A Honda Key Fob Take?

A Honda key fob battery is a CR2025, which is a flat, circular 3-volt battery. You can find this type of battery at most automotive parts stores, hardware stores, or big box stores in the Jackson area. Having a spare key fob battery on hand is a good idea so you’re never left stranded if your key fob dies while you’re out and about.

As well as that, A CR2025 battery is a flat, circular 3-volt battery that you can find at many stores in the Jackson area for only a few dollars. It’s a good idea to have one of these batteries on hand so you’re never left unprepared if your key fob dies during your travels.

Does A Honda Key Fob Have To Be Reprogrammed After Replacing The Battery?

If you’ve ever replaced the battery in your Honda key fob, you may have noticed that the process is a little different than with other types of key fobs. That’s because in order to keep your Honda key fob working properly, you’ll need to reprogram it after replacing the battery.

While this may seem like a hassle, the process is actually quite quick and simple. In most cases, you can reprogram your Honda key fob in just a few minutes using nothing more than a paperclip.

Here’s a step-by-step guide to reprogramming your Honda key fob:

1. Start by locating the small button on your Honda key fob. This button is usually located near the bottom of the key fob, and is used to release the key from the key fob.

2. Once you’ve located the button, use a paperclip or other small object to press and hold the button.

3. While continuing to hold the button, press and release the Honda’s power button three times.

4. After pressing the power button three times, release the button you were holding on the key fob.

5. Your Honda key fob should now be programmed and ready to use.

If you have any trouble programming your Honda key fob, you can always consult your Honda’s owner’s manual for more detailed instructions.

Moreover, When you replace your Honda key fob battery, you’ll need to reprogram your Honda key. This is quick and simple.

How Do You Open The Back Of A Honda Key Fob?

If you’re like most people, you probably don’t think about how to open the back of your Honda key fob. But if you ever need to change the battery, you’ll be glad you know how. It’s actually pretty simple.

First, find a small coin or flathead screwdriver. Then, locate the small groove on the back of the key fob. Insert the coin or screwdriver into the groove and twist. The back of the key fob should pop open.

If your key fob has a key ring attached, you may need to remove the key ring before you can open the back. Once you’ve changed the battery, simply snap the back of the key fob closed and reattach the key ring.

Now you know how to open the back of a Honda key fob. Next time your battery starts to die, you can change it yourself in just a few minutes.

How Do You Change The Battery In A 2019 Honda Key?

If you find yourself asking how do you change the battery in a 2019 Honda key, you are not alone. Many Honda owners are unsure of how to change the battery in their key fob, and as a result, their key fob may stop working properly. If your key fob has stopped working, or if the battery is running low, follow these steps to change the battery in your 2019 Honda key.

To begin, locate the small release button on the back of the key fob. This release button is usually located near the top of the key fob, and may be hidden by a small piece of plastic. Once you have located the release button, use a small object, such as a paperclip, to press and hold the button.

Next, use your other hand to gently pry the back cover off of the key fob. Once the back cover is removed, you should see the battery inside the key fob. If you do not see the battery, consult the owner’s manual for your Honda key fob to locate it.

Once you have located the battery, use a small screwdriver to remove the battery from the key fob. Once the battery is removed, take a close look at it to determine which type of battery it is. Most Honda key fobs use CR2032 batteries, but some may use a different type.

Once you know which type of battery your Honda key fob uses, head to your local store and purchase a replacement battery. Once you have the replacement battery, insert it into the key fob and reassemble the key fob. Once the key fob is reassembled, press the release button to test the new battery.

Where To Buy A Replacement Battery For A Honda Key Fob?

There are a few places you can buy a replacement battery for a Honda key fob. One option is to go to a Honda dealership and purchase the battery from them. Another option is to buy the battery from an automotive parts store. Finally, you can also purchase the battery online from a variety of different retailers.

What Should You Do If Your Honda Key Fob Isn’T Working After You Replaced The Battery?

If your Honda key fob isn’t working after you replaced the battery, there are a few things you can try. First, make sure that the new battery is installed correctly. If it is, then try resetting the key fob by pressing the button for a few seconds. If that doesn’t work, you can try reprogramming the key fob.

What Is The Size Of The Battery For A Honda Accord Key Fob?

The Honda Accord key fob battery is a CR2032 battery. This type of battery is 3 volts and is often used in small electronics. The Honda Accord key fob battery is approximately the size of a quarter.

What Is The Key Battery Size For A Honda Civic?

The key battery size for a Honda Civic is CR2032. This type of battery is typically used in small electronics, like key fobs and remote controls.

What Happens If You Don’T Change The Battery In A Honda Key Fob?

If you don’t change the battery in a Honda key fob, the key fob will eventually stop working. The key fob battery is what powers the key fob, and without it, the key fob will not be able to function.

Can You Change The Battery In A Honda Key Fob Yourself?

You can change the battery in a honda key fob yourself, but it is not a difficult process. You will need a small Phillips head screwdriver and a new CR2032 battery. First, remove the keychain ring from the key fob. Then, use the screwdriver to remove the screw in the back of the key fob. Next, pry open the back of the key fob with the screwdriver. Be careful not to damage the key fob. Once the back is open, you will see the old battery. Remove it and replace it with the new battery. Finally, close the back of the key fob and screw it shut.

How Much Does It Cost To Change The Battery In A Honda Key Fob?

The cost to change the battery in a honda key fob can vary depending on the specific model of honda key fob. However, in general, the cost to replace the battery in a honda key fob is between $20 and $50.

Where Can You Get A New Battery For A Honda Key Fob?

There are a few places you can get a new battery for a honda key fob. One place is at a honda dealership. Another place is at a honda service center. A third place is at a honda parts store.

What Should You Do If Your Honda Key Fob Stops Working After Changing The Battery?

If your Honda key fob stops working after changing the battery, you should first check to see if the battery is properly installed. If it is, then you should check the key fob’s fuse. If the fuse is blown, then you will need to replace it. Finally, if none of these solutions work, you may need to replace the key fob.

Final Word

It’s easy to change the battery in your Honda key fob remote! Just follow these simple steps:

1. Find the release button on the back of the key fob.

2. Press the release button to open the key fob.

3. Remove the old battery and replace it with a new one.

4. Close the key fob and you’re done!

If your Honda key fob remote isn’t working properly, changing the battery is a quick and easy fix. So don’t wait, change that battery today!

FAQ

How To Replace The Battery In A 2015 Honda Civic Key Fob?

If your 2015 Honda Civic key fob starts to malfunction, it may be time to replace the battery. Here is a step-by-step guide on how to do so:

1. Find a small flat-head screwdriver.

2. Gently pry open the key fob case. Be careful not to damage the case.

3. Remove the old battery and insert the new one. Make sure the new battery is installed in the correct orientation.

4. Close the key fob case and screw it shut.

5. Test the key fob to make sure it is working properly.

Related Post:

Share
Tweet
Pin
Share