How to Replace the Battery on ASUS Transformer Tablets: A Step-by-Step Guide

To change the battery on an ASUS Transformer tablet, orient the device with the top screen facing you. Use a plastic opening tool to detach the battery. The battery wire harness will disconnect as you lift the battery. Reassemble by following these steps in reverse. Handle all parts carefully during the process.

Once the cover is removed, locate the battery. Disconnect the battery cable from the motherboard by gently lifting it at the connector. Carefully slide the battery out of its compartment. Insert the new battery in the same position and reconnect the battery cable to the motherboard. Press down firmly to ensure a secure connection.

After replacing the battery, reattach the back cover. Make sure it fits snugly without any gaps. Finally, power on your ASUS Transformer tablet and check if it recognizes the new battery.

With the battery replaced, your tablet should now function smoothly again. Next, let’s discuss tips on maintaining your tablet’s battery health to prolong its lifespan and ensure optimal performance.

What is an ASUS Transformer Tablet, and Why Might You Need to Replace Its Battery?

An ASUS Transformer Tablet is a hybrid device that combines the features of a tablet and a laptop. It typically features a detachable keyboard, allowing users to switch between tablet mode for portability and laptop mode for productivity. These devices are popular for their versatility, lightweight design, and the ability to run Windows or Android operating systems, depending on the model.


You might need to replace the battery of an ASUS Transformer Tablet for several reasons:

Reason for ReplacementDescription
Battery PerformanceThe battery no longer holds a charge effectively, leading to shorter usage times.
DegradationFrequent charging cycles can degrade the battery’s performance over time.
Physical DamagePhysical damage or swelling of the battery can pose safety risks.
Software IssuesSoftware issues may lead to battery drain, but if the issue persists after troubleshooting, a replacement might be necessary.

What Tools Are Necessary for Replacing the Battery on an ASUS Transformer Tablet?

To replace the battery on an ASUS Transformer Tablet, the following tools are necessary:

ToolDescription
Small Phillips screwdriverFor removing screws
Plastic spudger or opening toolTo safely pry open the tablet casing
TweezersFor handling small components
Replacement batteryTo replace the old battery
Heat gun or hairdryer (optional)For loosening adhesive

Ensure you have a clean workspace and follow safety precautions while handling electronic components.

How Can You Safely Power Off Your ASUS Transformer Tablet Prior to Battery Replacement?

StepAction
1Save any open documents and close all applications to prevent data loss.
2Press and hold the power button until the power options menu appears.
3Select ‘Power off’ from the menu.
4Wait for the tablet to shut down completely before proceeding with the battery replacement.
5Ensure the tablet is unplugged from any power source.
6Remove any external accessories (like cases or keyboards) to prevent damage during battery replacement.

What Are the Step-by-Step Instructions to Open an ASUS Transformer Tablet for Battery Replacement?

Step Action Tools Needed Notes
1 Power off the ASUS Transformer tablet completely. N/A Make sure the device is fully powered off to avoid any electrical issues.
2 Remove any external accessories, such as the keyboard dock, if attached. N/A Ensure all accessories are removed for easier access.
3 Locate the screws on the back cover of the tablet. Use a Torx screwdriver to remove all screws. Torx screwdriver Keep track of the screws for reassembly.
4 Carefully use a plastic opening tool to pry open the back cover. Start from a corner and gently work your way around the perimeter. Plastic opening tool Be gentle to avoid damaging the cover.
5 Once the back cover is removed, locate the battery. It is usually secured with additional screws or adhesive. N/A Note how the battery is secured for proper reinstallation.
6 Disconnect the battery connector from the motherboard by gently lifting it off with a plastic tool. Plastic opening tool Be careful not to damage the connector.
7 If the battery is secured with screws, remove them before taking out the battery. If it’s adhesive, carefully lift the battery out. Torx screwdriver (if screws are present) Ensure the old battery is disposed of properly.
8 Place the new battery in the same position as the old one and reconnect the battery connector to the motherboard. N/A Ensure the connector is securely attached.
9 Reattach any screws that were removed and carefully snap the back cover back into place. Torx screwdriver Double-check that all screws are tightened.
10 Power on the tablet to ensure it functions properly with the new battery. N/A Check for any issues before closing up.

How Do You Safely Remove the Old Battery from an ASUS Transformer Tablet?

To safely remove the old battery from an ASUS Transformer Tablet, follow these steps:


StepDescription
1Power off the device completely and disconnect it from any charging source.
2Use a small Phillips screwdriver to remove the screws on the back panel of the tablet. Keep track of the screws for reassembly.
3Carefully pry open the back panel using a plastic opening tool to avoid damaging the device.
4Locate the battery connection and gently disconnect the battery cable from the motherboard.
5If the battery is secured with adhesive, use a plastic tool or your fingers to carefully lift it out. Avoid using metal tools to prevent damage.
6Once the old battery is removed, dispose of it properly according to local regulations.
7If replacing with a new battery, connect it to the motherboard, secure it in place, and reattach the back panel.
8Insert and tighten the screws to complete the process.

What Steps Should You Follow to Install a New Battery in Your ASUS Transformer Tablet?

Follow these steps to install a new battery in your ASUS Transformer Tablet:


Step NumberActionDetails
1Power off the tabletMake sure the device is completely powered off to avoid any electrical issues.
2Remove protective caseTake off any case or cover to access the battery compartment.
3Locate battery compartmentFind the panel on the back of the tablet that covers the battery.
4Unscrew the panelUse a small screwdriver to remove screws if the panel is secured.
5Disconnect old batteryCarefully pull out the connector to disconnect the old battery.
6Insert new batteryConnect the new battery to the same connector as the old one.
7Replace the panelPut the panel back and screw it in place if it was removed.
8Power on the tabletTurn on the device to check if the new battery works properly.

How Can You Properly Reassemble Your ASUS Transformer Tablet After Replacing the Battery?

To properly reassemble your ASUS Transformer Tablet after replacing the battery, follow these steps:


StepDescription
1Ensure that you have all necessary tools: a small screwdriver, plastic prying tool, and a clean workspace.
2Begin by aligning the back cover with the tablet’s frame, ensuring that all clips and connectors are correctly positioned.
3Gently press down on the edges of the back cover until you hear clicks, indicating that the clips have secured it in place.
4Reconnect any internal cables that may have been detached during the battery replacement. Make sure they are firmly seated in their connectors.
5Replace and tighten any screws that hold the back cover in place.
6Power on the device to ensure the new battery is functioning and the tablet is operating correctly.
7Inspect the tablet for any gaps or misalignments in the back cover to ensure it is securely attached.
8Check the tablet’s functionality, including touch responsiveness and charging capabilities, to confirm everything is working properly.

What Common Mistakes Should Be Avoided When Replacing the Battery on an ASUS Transformer Tablet?

When replacing the battery on an ASUS Transformer tablet, several common mistakes should be avoided:

Common MistakesDescription
Not powering off the device:Ensure the tablet is completely powered off to prevent short-circuits.
Using improper tools:Always use the correct tools to avoid damaging the device or battery.
Ignoring static discharge precautions:Use an anti-static wrist strap to prevent damaging internal components.
Forgetting to disconnect the battery:Always disconnect the old battery before installing a new one.
Not following manufacturer guidelines:Refer to the specific instructions for your model to avoid mistakes.
Over-tightening screws:Be careful not to overtighten screws as this can damage the casing or internal components.
Failing to check compatibility:Ensure the new battery is compatible with your specific ASUS Transformer model.
Not using proper disposal methods:Dispose of the old battery according to local regulations to avoid environmental harm.

What Should You Check If Your ASUS Transformer Tablet Will Not Power On After Battery Replacement?

If your ASUS Transformer Tablet will not power on after battery replacement, consider checking the following:

Check ItemDescription
Battery InstallationEnsure the battery is properly installed and seated in the device.
Charging Cable and AdapterCheck if the charging cable and adapter are functioning correctly by testing them with another device.
Charging PortInspect the charging port for any debris or damage.
Hard ResetPerform a hard reset by holding down the power button for about 10-15 seconds.
Battery CompatibilityVerify if the battery is compatible with your tablet model.
Visible DamageCheck for any visible damage to the tablet or battery.
Charging DurationLeave the tablet plugged in for a while to see if it responds.
User Manual/SupportConsult the user manual or ASUS support for additional troubleshooting steps.
Related Post: