How To Change Yi Dashcam Battery?

As an Amazon Associate, I Earn From Qualifying Purchases.

Last Updated on September 19, 2022 by Ellis Gibson (B.Sc. in Mechanical Engineering)

If you’re anything like me, you’ve grown to rely on your Yi dashcam to capture all the important moments on the road. So when your battery starts to die, it can be a real pain. In this article, I’ll show you how to change your Yi dashcam battery in just a few simple steps. With this knowledge, you’ll be able to keep your dashcam up and running for years to come.

So, how to change yi dashcam battery?

To change the Yi dashcam battery, unscrew the back panel to access the battery compartment. Remove the old battery and insert the new one, making sure the positive and negative terminals are aligned. Screw the back panel back on and press the power button to turn the dashcam back on.

Let’s dig into it and see what we can learn.

Step By Step Process On: How To Change Yi Dashcam Battery?

Here I will explain you step by step process of how to change yi dashcam battery? let’s see how to change yi dashcam battery.


  1. Plastic Knife
  2. Replacement Yi Dashcam Battery
  3. Phillips Screwdriver


To change your Yi Dashcam battery, first locate the battery inside the camera. It is located under the LCD screen.


Using a plastic knife, pry open the side of the camera where the USB port is located. This will allow you to access the battery.


Once the battery is exposed, remove the old battery and replace it with the new one. Make sure the new battery is facing the correct way before replacing the screws.


After the new battery is in place, reassemble the camera and plug it in to the USB port. The camera should power on and remember the date and time you initially configured.

If you wanted to watch a youtube video that shows you how to change yi dashcam battery? I have included a video below:

How Do I Change The Battery In My Yi Dash Cam?

If you’re asking yourself this question, don’t worry – you’re not alone. Many people have difficulty figuring out how to change the battery in their Yi Dash Cam, and it can be a bit tricky. However, once you know how to do it, it’s actually quite easy.

Here’s a step-by-step guide on how to change the battery in your Yi Dash Cam:

1. Locate the battery cover on the back of the dash cam.

2. Remove the battery cover by gently pushing it up and off.

3. Take out the old battery by gently pulling it out of thedash cam.

4. Insert the new battery into the dash cam, making sure that the positive and negative terminals are aligned correctly.

5. Replace the battery cover and snap it into place.

And that’s it! You’ve successfully changed the battery in your Yi Dash Cam.

How Do You Charge A Yi Dashcam?

If you’re like most people, you probably don’t think too much about how you charge your Yi Dashcam. You just plug it into a power source and let it do its thing. However, if you want to get the most out of your camera, it’s important to understand the ins and outs of charging. Here’s a quick rundown of everything you need to know about charging your Yi Dashcam.

When the camera is powered off, use a USB cable to connect to an adapter or external power source (mobile power charger, PC etc.) to recharge. We recommend using our official adapter. Disconnect the USB cable when the power indicator light is off (it means it’s fully charged).

It’s important to note that you should only use the official Yi Dashcam adapter to charge your camera. While you may be tempted to use a different adapter, doing so could damage your camera or shorten its lifespan.

Once your camera is fully charged, you can disconnect it from the power source. Be sure to wait until the power indicator light is off before disconnecting the USB cable; this indicates that the camera is fully charged and ready to use.

Now that you know how to charge your Yi Dashcam, you can keep it powered up and ready to capture all your adventures.

Moreover, When the camera is powered off, you can recharge it by connecting it to an adapter or external power source with a USB cable. We recommend using our official adapter. When the power indicator light is off, it means the camera is fully charged. You can then disconnect the USB cable.

How Do You Open The Mirror Dash Cam On Yi?

There are a few ways to open the mirror dash cam on the Yi Action Camera. The most common way is to use the physical button on the camera. To do this, simply press and hold the power button for 3 seconds. The camera will then turn on and the mirror dash cam will start recording.

Another way to open the mirror dash cam on the Yi Action Camera is to use the Yi Action App. Once you have paired your Yi Action Camera with the app, you can simply open the app and tap on the ‘Dash Cam’ icon. The mirror dash cam will then start recording.

If you are having trouble opening the mirror dash cam on the Yi Action Camera, please contact our customer support team for assistance.

How Do You Charge A Dash Cam Battery?

If you own a dash cam, it’s important to know how to charge the battery properly. After all, you don’t want your dash cam to die in the middle of recording a potentially important event. Here are a few tips on how to charge a dash cam battery:

1. Make sure you’re using the right charger. Some dash cams come with a specific charger that you should use. If you’re not sure, consult the owner’s manual or the manufacturer’s website.

2. Don’t use a fast charger. While it might be tempting to use a fast charger to get your dash cam battery charged up quickly, it’s not a good idea. Fast chargers can damage lithium-ion batteries, so it’s best to avoid them.

3. Use a slow charger. Slow chargers are specifically designed to charge lithium-ion batteries without damaging them. If your dash cam came with a fast charger, you can usually buy a slow charger separately.

4. Follow the manufacturer’s instructions. Every dash cam is different, so it’s important to follow the charging instructions that came with your particular model.

5. Charge the battery regularly. Even if you don’t use your dash cam very often, it’s a good idea to charge the battery on a regular basis. This will help keep it in good condition and prolong its lifespan.

By following these tips, you can be sure that you’re properly charging your dash cam battery and that it will be ready to go when you need it.

My Yi Mirror Dash Camera Is Not Turning On, Why?

There are a few possible reasons why your Yi mirror dash camera is not turning on. First, check to make sure that the camera is properly plugged into the power source. If the camera is plugged in but still not turning on, it could be a problem with the camera itself or with the power source. If you’re using an external power source, such as a car charger, make sure that it is working properly. If you’re using the internal battery, it may be depleted and need to be recharged. Another possibility is that the camera’s firmware may be outdated. To check and update the firmware, you’ll need to connect the camera to a computer. Finally, if none of these solutions work, it’s possible that the camera may be defective and will need to be replaced.

How Do I Properly Care For My Dash Cam’S Internal Battery?

To properly care for your dash cam’s internal battery, you should:

-Store the dash cam in a cool, dry place when not in use.

-Avoid exposing the dash cam to extreme temperatures.

-Regularly check the battery level and charge the dash cam when needed.

Why Does My Dashcam Keep Restarting?

There are several reasons why a dashcam might keep restarting. The most common reason is that the dashcam is not getting enough power from the vehicle’s battery. This can happen if the battery is old or damaged, or if there is a problem with the vehicle’s electrical system. Another possibility is that the dashcam’s memory card is full and needs to be replaced. Finally, the dashcam could be faulty and need to be replaced.

How To Replace The Battery In A Rexing V1 Dash Cam?

If your Rexing V1 Dash Cam is no longer holding a charge, it may be time to replace the battery. Here’s how to do it:

1. Remove the SD card and disconnect the power cord from the dash cam.

2. Use a small screwdriver to remove the two screws from the back of the camera.

3. Carefully remove the back cover of the camera.

4. Disconnect the old battery from the camera.

5. Connect the new battery to the camera.

6. Replace the back cover and screw it into place.

7. Reinsert the SD card and reconnect the power cord.

Your Rexing V1 Dash Cam should now be working properly with the new battery.

How Long Does It Take To Charge The Battery?

How long it takes to charge a battery depends on the type of battery, the type of charger, and the level of discharge. A typical lead-acid battery will take about four to six hours to charge using a standard 10-amp charger. A lithium-ion battery will usually take two to four hours to charge using a fast charger.

How To Charge The Battery Of A Yi Dashcam?

To charge the battery of a Yi Dashcam, first connect the Dashcam to the power adapter. Then plug the power adapter into an outlet. The Dashcam will begin charging automatically. The battery will take approximately 2 hours to fully charge.

What Battery Does A Yi Dashcam Use?

The Yi Dashcam uses a 3.7V 1600mAh Li-ion battery.

How Do I Replace The Battery?

If your car’s battery is dead, you’ll need to replace it. Here’s how:

1. Open the hood and locate the battery.

2. Disconnect the negative terminal first, then the positive terminal.

3. Remove the old battery and put the new battery in its place.

4. Connect the positive terminal first, then the negative terminal.

5. Close the hood and start your car.

Which Car Battery Charger Is The Best?

There are many different types of car battery chargers on the market, so it can be difficult to choose the best one for your needs. Some factors to consider when choosing a car battery charger include the type of battery you have, the size of the battery, and the charging speed.

If you have a small battery, you may not need a very powerful charger. However, if you have a large battery or a battery that is difficult to charge, you may want to choose a charger with more power.

Charging speed is another important factor to consider. Some chargers can charge a battery very quickly, while others may take longer. If you need to charge your battery quickly, you may want to choose a charger with a high charging speed.

Final Word

If you’re like most people, you probably don’t know how to change your Yi dashcam battery. But don’t worry, we’re here to help. Just follow these simple steps and you’ll be up and running in no time.

First, locate the battery cover on the back of your dashcam. You’ll see two small Phillips head screws holding it in place. Remove these screws and the cover will come right off.

Next, locate the battery itself. It’s a small, black, rectangular object. Gently pull it out of its socket and set it aside.

Now, take your new battery and insert it into the socket. Make sure the positive and negative terminals are aligned correctly, then push it gently into place.

Finally, replace the battery cover and screw it back into place. That’s it! You’ve now successfully changed your Yi dashcam battery.


If My Dash Cam Loses Date, Will It Stop Working?

If your dash cam loses date, it will continue to work, but you may not be able to use certain features. For example, if you rely on your dash cam to record your speed or location, you may not be able to access this information if the date is not working. Additionally, some dash cams have features that require an active date in order to work properly.

What Is The Voltage Of A 402035 Battery?

A 402035 battery has a voltage of 12 volts. This is the standard voltage for most car batteries.

What Are The Best Yi 4K Dash Cams?

There are a few different factors to consider when determining which Yi 4k dash cam is best for you. Some of the most important factors include:

– The overall quality of the camera

– The features that are included

– The price

– The warranty

When taking all of these factors into consideration, the best Yi 4k dash cams are the Yi Ultra and the Yi Compact.

The Yi Ultra is the best overall dash cam on the market, thanks to its 4k video quality, advanced features, and competitive price.

The Yi Compact is also a great choice, offering excellent video quality and a wide range of features. However, it is slightly more expensive than the Yi Ultra.

Related Post: