How To Charge Klx140 Battery?

As an Amazon Associate, I Earn From Qualifying Purchases.

Last Updated on September 24, 2022 by Ellis Gibson (B.Sc. in Mechanical Engineering)

If you’re like me, then you’re probably always on the go and constantly using your phone. And, if you’re like me, then you know how frustrating it is when your phone dies and you don’t have a charger. But, luckily, there are ways to charge your phone without a charger. In this article, I will show you how to charge your klx140 battery without a charger.

So, how to charge klx140 battery?

The easiest way to charge a KLX140 battery is to use a standard household outlet. You’ll need to purchase a charger specifically designed for the KLX140, which can be found at most electronics stores. Once you have the charger, simply plug it into the outlet and then into the battery. Most chargers have a light that indicates when the battery is fully charged.

Let’s dig into it and see what secrets it holds.

Step By Step Process On: How To Charge Klx140 Battery?

Here I will explain you step by step process of how to charge klx140 battery? let’s see how to charge klx140 battery.


1.8mm socket 2. 10mm socket 3. 12mm wrench 4. 10mm socket 5. new battery 6. charge port 7. zip ties

Step-01: Start by opening up the seat with an 8mm socket to access the battery.

Step-02: Once the seat is open, you’ll see two nuts holding down the battery. One is a 10mm, and the other is a 12mm.

Step-03: Use a 12mm wrench to loosen and remove the nut on the backside of the fender.

Step-04: Next, use a 10mm socket to remove the nut on the outside of the fender.

Step-05: With the nuts removed, you can now take out the battery.

Step-06: Inspect the battery terminals to make sure they’re clean and free of corrosion.

Step-07: If the terminals are clean, you can now install the new battery.

Step-08: Once the new battery is installed, you can now route the positive and negative wires to the location of your choice.

Step-09: We recommend running the wires to a charge port located underneath the seat.

Step-10: To install the charge port, simply remove the seat and drill a hole large enough to fit the charge port.

Step-11: Once the hole is drilled, insert the charge port and secure it in place with the provided hardware.

Step-12: Route the wires through the hole and connect them to the positive and negative terminals on the battery.

Step-13: We recommend using zip ties to secure the wires in place.

Step-14: Once the wires are secure, you can now reinstall the seat.

Step-15: That’s it! You’ve now successfully installed a charge port on your Kawasaki KLX140.

If you wanted to watch a youtube video that shows you how to charge klx140 battery? I have included a video below:

How Do You Charge A Electric Start Dirt Bike?

It’s easy to charge a electric start dirt bike! Just hook up the positive and negative leads from the battery to the corresponding posts on the bike. If you’re not sure which lead is which, consult your bike’s owners manual. Once the leads are connected, simply turn on the switch and let the bike charge for a few hours.

What Battery Does A Klx 140 Take?

The Kawasaki KLX140 is a great little bike. It’s perfect for beginners or experienced riders alike. But what battery does it take?

The KLX140 takes a 12V 6AH (100 cca) battery. This is a standard size battery that you can find at most auto parts stores.

As well as that, This is a replacement battery for a 2008-2017 Kawasaki KLX140 motorcycle. It is a 12-volt, 6-amp battery with 100 cca (cold cranking amps).

Where Is The Battery On A Kawasaki Klx?

The battery on a Kawasaki KLX is located under the seat.

What Are The Symptoms Of A Klx140 Battery That Needs To Be Charged?

If your klx140 battery is showing any of the following symptoms, it may be time for a charge:

1. Your klx140 battery is taking longer to charge than it used to.

2. Your klx140 battery is not holding a charge as long as it used to.

3. Your klx140 battery is showing signs of physical damage, such as cracks or bulges.

4. Your klx140 battery is leaking fluid.

5. Your klx140 battery is emitting a strange smell.

If you notice any of these symptoms, it’s important to take action right away and charge your klx140 battery. Ignoring the problem could lead to further damage to your battery or even a fire.

Final Word

After reading this article, you should now know how to charge klx140 battery. It is important to remember that the battery must be charged in a well-ventilated area and never left unattended while charging. Be sure to follow the manufacturer’s instructions carefully to ensure a safe and successful charging process.

Related Post: