How To Check Bose Qc35 Battery?

As an Amazon Associate, I Earn From Qualifying Purchases.

Last Updated on October 19, 2022 by Ellis Gibson (B.Sc. in Mechanical Engineering)

It can be frustrating when you’re trying to enjoy your music and your headphones die. Nobody wants to be tethered to a charger, and with the Bose QC35, you don’t have to be. Here’s how to check the remaining battery charge so you can keep on listening.

So, how to check bose qc35 battery?

There are three ways to check the remaining battery charge on your QuietComfort 35 headphones:

1. On the headphones themselves, there is a battery indicator light on the right ear cup. This will show you the current battery level.

2. You can also check the battery level on the Bose Connect app. Simply open the app and look at the “Battery” section.

3. Finally, you can check the battery level on the Bose Connect website. Simply log in and look at the “Battery” section.

Let’s dig into it and see where it takes us.

Step By Step Process On: How To Check Bose Qc35 Battery?

Here I will explain you step by step process of how to check bose qc35 battery? let’s see how to check bose qc35 battery.

REQUIRED TOOLS:

1.Screwdriver 2. Phillips head screws 3. 1.5mm 4. Tweezers 5. Heat gun 6. Flathead screwdriver 7. Replacement battery 8. Tape

Step-01:

To check the battery on your QC 35, first flip the unit over and remove the ear pad. There are two clips holding the mesh in place, so carefully pry them out and set the mesh aside.

Step-02:

Next, use a 1.5mm screwdriver to remove the two Phillips head screws from the bottom of the unit.

Step-03:

Lift up the unit and the bottom cover should pop right off. Set the cover aside.

Step-04:

Now you need to unsolder the battery. There are three wires – red, white, and black. Use tweezers to carefully remove the wires and set them aside.

Step-05:

Flip the unit over and you’ll see a panel that’s held in place by some glue. Use a heat gun to carefully loosen the glue and then pry the panel up with a flathead screwdriver.

Step-06:

Underneath the panel, you’ll see the battery. It’s held in place by a little bit of glue, so carefully pry it up and out. Set the old battery aside.

Step-07:

Grab your replacement battery and make sure the wires are in the correct order – red, black, and white. Place the battery in the slot and then press it into place.

Step-08:

Flip the unit over and solder the wires back into place. Make sure they’re securely soldered and then tuck the wires back under the unit.

Step-09:

Grab the bottom cover and place it back on the unit. Press it into place and then flip the unit over. Grab the two screws you removed in Step 2 and screw them back in place.

Step-10:

Wrap the mesh around the unit and secure it in place with tape.

Step-11:

Enjoy your newly replaced battery!

If you wanted to watch a youtube video that shows you how to check bose qc35 battery? I have included a video below:

How Do I Check The Battery On My Bose Headphones?

It’s actually pretty easy to check the battery level on your Bose headphones. There are two ways to do it.

The first way is to use the Bose Music app. When you open the app, the earbud battery level is displayed on the “My Bose” screen and the home screen.

The second way is to set your Shortcut to check the battery level. To do this, touch and hold the left earbud. A voice prompt will announce the earbud battery level.

That’s all there is to it! Checking the battery level on your Bose headphones is quick and easy.

Also, If you want to check the battery level of your Shortcut, touch and hold the left earbud. A voice will tell you how much battery is left. You can also check the battery level on the “My Bose” screen and the home screen in the Bose Music app.

How Do You Know When Bose Quietcomfort 35 Is Fully Charged?

When you first connect your Bose QuietComfort 35 headphones to a USB charger, the battery light will blink Amber. This indicates that the headphones are charging. Once the headphones are fully charged, the light will turn solid green.

As well as that, In order to charge your product, you must first connect a USB cable from the product to a USB charger. The battery light will blink amber while the product is charging, and will glow solid green once the product is fully charged.

How Long Does The Bose Qc35 Battery Last?

Assuming you would like a blog titled “How Long Does the Bose QC35 Battery Last?”, here is one potential approach:

It’s a question we’ve all asked ourselves at one point or another: how long does the Bose QC35 battery last?

After all, there’s nothing worse than being in the middle of a great jam session only to have your music cut out because your headphones died.

Fortunately, the Bose QC35 battery life is pretty impressive. According to the manufacturer, the battery can last up to 20 hours on a single charge.

That’s pretty impressive, especially when you compare it to other wireless headphones on the market.

Of course, your actual mileage may vary depending on how you use your headphones. If you have the volume cranked up to 11 the entire time, you probably won’t get 20 hours of battery life.

But if you use them more moderately, you should be able to get pretty close to that 20-hour mark.

And if you do find yourself running low on juice, a quick 15-minute charge will give you another 2.5 hours of battery life, which should be enough to get you through the day.

So there you have it: the lowdown on the Bose QC35 battery life. Now you can rock out without worrying about your headphones dying on you.

Along with, This product has a long battery life, so you can use it for a long time before it needs to be charged again.

How Do I Check The Battery On My Bose App?

It’s easy to check the battery level of your Bose product using the Bose Connect app. Simply open the app and connect your product. Once connected, the battery level will appear in a circle in the lower-right corner.

If you have more than one Bose Bluetooth® product, you can swipe left or right to find the desired product. Checking the battery level of all your Bose products is a great way to ensure that you’re never caught without power.

Moreover, The Bose Connect app is used to check the battery level of your Bose Bluetooth product. Once you have connected your product to the app, the battery level will appear in a circle in the lower-right corner. You can also swipe left or right to find the desired product if you have more than one Bose Bluetooth product connected.

Final Word

1. Make sure your headphones are turned off. 2. Press and hold the power button for two seconds. The battery status indicator will show how much charge remains.

When it’s time to recharge, simply connect the included USB cable to your headphones and plug it into a USB port. The LED will glow red when charging and turn off when complete.

Related Post:

Share
Tweet
Pin
Share