How To Check Ebike Battery Health?

As an Amazon Associate, I Earn From Qualifying Purchases.

Last Updated on October 19, 2022 by Ellis Gibson (B.Sc. in Mechanical Engineering)

If you’re like me, you love your ebike. You take it on all your adventures, and it’s become a trusty companion. But just like any battery-powered device, your ebike’s battery will eventually start to degrade. So how can you tell if your ebike battery is still healthy, or if it’s time for a replacement?

In this article, I’ll show you how to check your ebike battery health, so you can keep riding for years to come. I’ll also share some tips on prolonging your battery’s life.

So, how to check ebike battery health?

There are a few ways to check the health of your ebike battery. One way is to check the voltage of the battery with a voltmeter. A healthy battery should have a voltage of around 12.6 volts. Another way to check the health of your ebike battery is to check the charge time. A healthy battery should take around 4-6 hours to fully charge.

Let’s dig into it and see what secrets it holds.

Step By Step Process On: How To Check Ebike Battery Health?

Here I will explain you step by step process of how to check ebike battery health? let’s see how to check ebike battery health.

REQUIRED TOOLS:

1.A voltmeter 2. The ebike battery 3. The ebike charger 4. A battery key (if applicable)

Step-01:

First, you need to gather the following materials: – A voltmeter – The ebike battery – The ebike charger

Step-02:

Next, you will want to check the charger by using the voltmeter. To do this, you will want to set the voltmeter to the “DC” or direct current setting. Once you have done this, you will want to touch the black lead of the voltmeter to the negative terminal of the charger, and the red lead of the voltmeter to the positive terminal of the charger. If the voltmeter reads zero, this means that there is no power going to the charger and it is not working. If the voltmeter reads a voltage other than zero, then the charger is working properly.

Step-03:

After you have checked the charger, you will want to check the ebike battery. To do this, you will want to touch the black lead of the voltmeter to the negative terminal of the battery, and the red lead of the voltmeter to the positive terminal of the battery. If the voltmeter reads zero, this means that the battery is not working. If the voltmeter reads a voltage other than zero, then the battery is working properly.

Step-04:

Once you have checked both the charger and the battery, you will want to test the charging port of the battery. To do this, you will want to touch the black lead of the voltmeter to the negative terminal of the charging port, and the red lead of the voltmeter to the positive terminal of the charging port. If the voltmeter reads zero, this means that the charging port is not working. If the voltmeter reads a voltage other than zero, then the charging port is working properly.

Step-05:

If you find that the charging port is not working properly, you will want to check the output of the battery. To do this, you will want to touch the black lead of the voltmeter to the negative terminal of the output, and the red lead of the voltmeter to the positive terminal of the output. If the voltmeter reads zero, this means that the output is not working. If the voltmeter reads a voltage other than zero, then the output is working properly.

Step-06:

If you find that the output is not working properly, you will want to check the battery key.

If you wanted to watch a youtube video that shows you how to check ebike battery health? I have included a video below:

How Do I Test My Bike Battery?

This is a question that we get a lot at the shop, and it is a good one! There are a few things that you will need in order to test your bike battery:

First, you will need a voltmeter. You can pick one up at most hardware stores, or even some auto parts stores. Second, you will need to find the positive and negative terminals on your battery. The positive terminal will usually be marked with a “+” sign, and the negative terminal will usually be marked with a “-” sign.

Once you have your voltmeter and you have located the positive and negative terminals on your battery, you are ready to begin testing. First, you will want to set your voltmeter to the “DC Voltage” setting. Next, you will touch the positive lead of the voltmeter to the positive terminal on the battery, and the negative lead of the voltmeter to the negative terminal on the battery.

If the voltmeter reading is 12.6 volts or higher, then your battery is considered to be fully charged. If the voltmeter reading is 12.5 volts or lower, then your battery is considered to be discharged.

You can also test the health of your battery by performing a load test. To do this, you will need a load tester, which can be purchased at most auto parts stores.

Attach the positive lead of the load tester to the positive terminal on the battery, and the negative lead of the load tester to the negative terminal on the battery. Turn on the load tester, and let it run for about 15 seconds.

If the voltmeter reading is 12.6 volts or higher, then your battery is considered to be in good condition. If the voltmeter reading is 12.5 volts or lower, then your battery may need to be replaced.

Testing your bike battery is a good way to ensure that it is in good condition and will be able to start your bike when you need it to.

How Long Do Ebike Batteries Last?

How long do ebike batteries last?

This is a question we get a lot at ebikeling. And it’s a tough one to answer. There are so many variables that can affect battery life, from the type of battery to how well you take care of it.

In general, though, a high-quality ebike battery should last anywhere from 2 to 5 years. Of course, that depends on a number of factors, including the type of battery itself and how well you take care of it.

The most common type of battery found in electric bikes nowadays is a lithium battery. Lithium batteries are known for their high energy density, which means they can pack a lot of power into a small space. That’s why they’re often used in laptop computers and cell phones.

Lithium batteries also have a very long life span. With proper care, a lithium battery can last for thousands of charge cycles. That’s why many ebike manufacturers offer a 5-year warranty on their lithium batteries.

Of course, even the best battery will eventually reach the end of its life. When that happens, you’ll need to replace it. But with proper care, you can help to prolong the life of your battery and get the most out of it.

Here are a few tips to help you extend the life of your ebike battery:

1. Avoid extreme temperatures.

Lithium batteries don’t like extreme heat or cold. So if you’re storing your bike in a hot garage or in the freezing cold, it’s best to remove the battery and store it in a cool, dry place.

2. Keep it charged.

It’s best to keep your battery charged at all times. Lithium batteries will self-discharge over time, even when they’re not in use. So if you know you won’t be riding your bike for a while, it’s a good idea to plug in the battery and top it off.

3. Avoid deep discharge.

Try to avoid completely draining your battery. Deep discharge can damage the battery and shorten its life. If you can, plug in your battery before it gets too low.

4. Use a quality charger.

Make sure you’re using a quality charger designed for lithium batteries. Cheap knock-off chargers can damage your battery and shorten its life.

5. Store it correctly.

If you’re going to be storing your bike for a long period of time, it’s best to remove the battery and store it in a cool, dry place. Storing the battery in a hot environment can damage it and shorten its life.

By following these tips, you can help to prolong the life of your ebike battery and get the most out of it.

Also, A high-quality eBike battery can last anywhere from 2-5 years. This depends on the type of battery and how well it is taken care of. The most common battery found in electric bikes is a lithium battery.

Should I Leave My Ebike Battery Plugged In All The Time?

This is a common question that we get asked a lot, and it’s one that has a bit of a complicated answer. In short, it’s not advisable to leave your ebike battery plugged in for long periods of time, as it can lead to the battery discharging and then not being able to properly recharge.

The reason for this is that when you leave a battery plugged in, it will slowly discharge itself. This is due to a process called self-discharge, which is when a battery starts to lose its charge even when it’s not being used. All batteries suffer from self-discharge to some extent, but it’s particularly pronounced in lithium-ion batteries.

So, if you leave your battery plugged in for a few days, it’s likely that it will have lost some of its charge by the time you come to use it again. This isn’t a big deal if you’re just using the battery for a short journey, but if you’re planning on going on a longer ride then you might find that the battery doesn’t last as long as you’d hoped.

In addition, if you regularly leave your battery plugged in for long periods of time, it can start to affect the battery’s overall lifespan. This is because the battery will go through more charge/discharge cycles, which can lead to it degrading faster.

So, if you want to keep your battery in good condition for as long as possible, it’s best to avoid leaving it plugged in for extended periods of time.

Additionally, If you leave your electric bike battery on the charger for long periods of time, it can discharge and only be at 95 percent capacity. To avoid this, only charge the battery when you need to.

How Do You Troubleshoot An Ebike Battery?

Assuming you have followed the above steps and your ebike battery still isn’t working, there are a few things you can do to troubleshoot the problem.

1. Check the voltage of the battery. If it is below 24 volts, the battery may be dead and will need to be replaced.

2. Inspect the battery charger. Make sure that it is properly plugged in and that the light is on.

3. Check the connections between the battery and the charger. Make sure that they are secure and that there is no corrosion.

4. If your battery is still not working, it may be damaged and will need to be replaced.

Also, If your e-bike’s battery isn’t working properly, you can try charging it and inspecting the charger. Check the battery for any loose connections or misalignments, and make sure the battery’s life cycle isn’t expired. You should also examine the BMS to ensure that it’s functioning properly.

Final Word

After reading this blog post, you should now know how to check ebike battery health. By following the tips and tricks mentioned in this blog post, you will be able to keep your ebike battery in tip-top shape. Remember, a healthy battery is a happy battery!

If you found this blog post helpful, be sure to share it with your friends and family who also own ebikes. And, if you have any questions about ebike battery maintenance, feel free to leave a comment below and one of our experts will get back to you as soon as possible.

Related Post:

Share
Tweet
Pin
Share