How To Check My Zone Battery?

As an Amazon Associate, I Earn From Qualifying Purchases.

Last Updated on October 19, 2022 by Ellis Gibson (B.Sc. in Mechanical Engineering)

If you’re like me, you’re always worried about your phone dying. And, if you’re like me, you probably have a Myzone fitness tracker. So, how do you check the battery on your Myzone tracker?

It’s actually really easy. All you have to do is open the Myzone app and tap on the “More” tab. Then, tap on “My device.” From there, you should see your battery level.

So, there you have it! Now you know how to check the battery on your Myzone tracker.

So, how to check my zone battery?

If your MZ-1 is displaying a low battery warning, you will need to replace the batteries. To do this, open the battery compartment on the back of the device and remove the old batteries. Insert new batteries, making sure to follow the correct polarity (+/-). Close the battery compartment and you’re all set!

Let’s dig into it and see where it takes us.

Step By Step Process On: How To Check My Zone Battery?

Here I will explain you step by step process of how to check my zone battery? let’s see how to check my zone battery.

REQUIRED TOOLS:

1.A working myzone belt 2. A replacement battery 3. A coin 4. The myzone app

Step-01:

First, check your battery life and see how much power is remaining. If it’s getting low, it’s time to replace the battery.

Step-02:

Next, unclip your module from the belt and turn it over. You’ll see a battery compartment with a cover.

Step-03:

Use a coin to unscrew the cover (counterclockwise). Be careful not to lose the cover!

Step-04:

Pop out the old battery and insert a new one, making sure the positive side is facing up.

Step-05:

Screw the cover back on (clockwise) until the arrow lines up with the lock icon.

Step-06:

Strap the module back into the belt and make sure your life tile shows up on the workout screen.

Step-07:

Now you’re ready to get back to your workout! Use hashtag #myzonecommunity to share your workout with the world.

If you wanted to watch a youtube video that shows you how to check my zone battery? I have included a video below:

How Long Does Myzone Battery Last?

How long does myzone battery last?

The MYZONE MZ-3 belt has a battery life of three to six months. You should only charge your MZ-3 belt when your battery is running low.

Additionally, Your MYZONE® MZ-3 has a battery life of three to six months. You should only charge your MZ-3 belt when your battery is running low.

How Do You Know When Myzone Is Fully Charged?

Your myzone is fully charged when the light on the back turns from red to green. You will also get a notification in the app when the myzone is below 20%.

Additionally, Snap the USB charging cable to the back of your MZ-Switch. A light will pulse red to indicate charging. Once fully charged, the light will turn solid green. You will also receive a notification in the app when you are below 20%.

How Do I Know If Myzone Is Working?

When you’re working out, it’s important to know that your Myzone belt is working properly. Here are a few ways to tell:

1. Check the battery level. With your belt on and activated, open the Myzone app and tap My Tile on the navigation bar. Your battery level displays below your % effort. If it’s getting low, it’s time to charge up.

2. Check the signal strength. The app also shows you how strong the signal is between your belt and phone. If it’s weak, try moving closer to your phone.

3. Check your heart rate. The Myzone app shows your heart rate in real time, so you can see if it’s in the right range for your workout. If it’s not, something may be wrong with the belt.

4. Check the Myzone app. If all else fails, the app may be able to tell you if something is wrong with the belt. Open the app and go to Settings > My Device. If there’s an error message, it will be displayed here.

Additionally, With your belt on and activated, open the Myzone app and tap My Tile on the navigation bar. Your battery level displays below your % effort.

Does Myzone Have A Battery?

The Myzone MZ-1 is a heart rate monitor that is cell-battery operated. The cell-battery that is used to power the Myzone MZ-1 is a coin-cell battery. The coin-cell battery is a type of button cell battery that is typically used in small electronic devices. The Myzone MZ-1 uses a coin-cell battery because it is a small and lightweight heart rate monitor that does not require a lot of power to operate. The coin-cell battery that powers the Myzone MZ-1 is easy to change or replace when it is exhausted.

Furthermore, The Myzone MZ-1 is a device that is powered by a coin-cell battery. This type of battery is easy to change or replace when it runs out of power.

Final Word

If you’re like most people, you probably don’t think about your Myzone heart rate monitor (MZ-1) until the battery starts to die. And then, you’re probably wondering how to change the battery on your MZ-1.

Thankfully, it’s a pretty simple process. Just follow these steps and you’ll have a new battery in no time.

1. Remove the back cover of the MZ-1.

2. Remove the old battery.

3. Insert the new battery.

4. Replace the back cover.

And that’s it! You’re now ready to get back to tracking your heart rate and workouts.

Related Post:

Share
Tweet
Pin
Share