To replace the battery in a 2017 Chevy Volt key fob, you need a CR2032 coin battery. Use a flathead screwdriver to open the fob. Take out the old battery and replace it with the new one. Make sure the contacts are clean. For step-by-step guidance, check a DIY video tutorial for better results.
Next, once the fob is open, you will see the old battery. Take note of the battery’s orientation. Remove the old CR2032 battery carefully. Then, insert the new battery in the same orientation. Ensure it sits securely in place. After installing the new battery, align the two halves of the fob. Press them together until they click.
Finally, test the key fob by pressing a button. If the light blinks, you have successfully replaced your Chevy Volt key fob battery.
In this guide, we explored the key steps for replacing the battery. Next, we will discuss troubleshooting tips if the key fob does not work after the battery replacement.
What Is a Key Fob and Why Is Battery Replacement Important for the 2017 Chevy Volt?
A key fob is a remote control device used to unlock or start a vehicle without the need for a traditional key. It utilizes radio signals to communicate with the car’s locking system. For the 2017 Chevy Volt, the key fob provides convenient access and enhances security features.
According to the National Automobile Dealers Association (NADA), key fobs streamline the entry process and improve overall vehicle security. Their importance lies not only in convenience but also in safety measures implemented in modern vehicles.
Key fobs operate using a small battery, typically a lithium coin cell. Regular battery replacement ensures the fob functions properly, especially for features like remote locking, unlocking, and ignition. A weak or dead battery can disable these functions, leading to inconvenience.
The Consumer Electronics Association defines battery replacement needs based on usage frequency and environmental factors, such as temperature and humidity, which can affect battery life. Regular maintenance and timely replacements are crucial to avoid disruptions.
Statistics show that most key fobs require battery changes every 2 to 3 years, depending on usage patterns. A study by AAA indicates that 25% of drivers experience key fob battery failure, often leading to costly dealership visits for replacements.
A malfunctioning key fob can result in delayed entry, increasing frustration and potentially compromising vehicle security. Such issues can deter people from utilizing built-in safety features, impacting overall vehicle efficiency.
Health-wise, outdated key fob technology might lead drivers to engage in unsafe practices like forced entry, reflecting negatively on societal security norms. Additionally, frequent battery replacements contribute to electronic waste, posing environmental challenges.
To mitigate these issues, regular checks and scheduled battery replacements are advised. The Consumer Product Safety Commission recommends replacing key fob batteries every two years or sooner if signs of weakness appear.
Incorporating battery monitoring systems or digital alerts can help maintain battery performance. Effective management practices such as recycling old batteries align with environmental goals, reducing waste associated with key fob maintenance.
How Can You Recognize the Signs of a Dying Key Fob Battery in Your 2017 Chevy Volt?
You can recognize the signs of a dying key fob battery in your 2017 Chevy Volt by observing specific symptoms such as decreased range, unresponsive buttons, and warning messages on the dashboard.
Decreased range: If you notice that you need to be closer to your vehicle for it to respond to the key fob, this may indicate a weakening battery. A functional key fob can typically work from a distance of about 30 feet. As the battery weakens, this range diminishes.
Unresponsive buttons: If pressing the key fob buttons does not consistently lock or unlock your doors, the battery may be failing. When the buttons require multiple attempts to function, it’s a clear sign that the battery’s power is diminishing.
Warning messages: Your 2017 Chevy Volt may display a warning message on the dashboard if the key fob battery is low. This alert serves as a reminder to check and possibly replace the battery.
Intermittent operation: You might experience that the key fob works only sporadically. If it sometimes operates normally but fails at other times, this inconsistency can signal an impending battery failure.
Physical signs of wear: Check the key fob for any physical signs of damage or wear that might also point to battery issues. If the fob is visibly cracked or damaged, it may affect performance.
Being aware of these signs can help you promptly address the need for a new key fob battery, ensuring your vehicle remains easily accessible and functional.
What Essential Tools Are Required for Replacing the 2017 Chevy Volt Key Fob Battery?
The essential tools required for replacing the 2017 Chevy Volt key fob battery include a small flat-head screwdriver and a new CR2032 battery.
- Tools Required:
– Small flat-head screwdriver
– New CR2032 battery
The importance of using the right tools cannot be overstated. Using improper tools can damage the key fob or lead to incorrect battery installation.
- Small Flat-Head Screwdriver:
The small flat-head screwdriver is crucial for prying open the key fob. This tool allows users to access the battery compartment without damaging the fob. A standard household screwdriver usually suffices, but a precision screwdriver set is recommended for better access.
Many users report that using a flat-head screwdriver with a thin blade helps to minimize the risk of scratching the fob’s surface. It provides leverage, making it easier to open the casing. This guarantees that the fob functions properly after the battery replacement.
- New CR2032 Battery:
The new CR2032 battery is a standard coin cell battery used in various electronic devices, including key fobs. It is essential to ensure that the replacement battery is genuine and has sufficient voltage. A fresh CR2032 battery typically lasts several years.
Using a low-quality battery could result in premature failure or operational issues with the key fob. Users should verify the battery’s expiration date before installation.
Following these simple yet effective steps ensures that the key fob continues to function correctly, saving potential costly repairs or replacements.
How Do You Open the 2017 Chevy Volt Key Fob for Battery Access?
To open the 2017 Chevy Volt key fob for battery access, you need to find the small release button, slide it to release the back cover, and replace the battery.
Firstly, locate the release button:
– The release button is typically found on the side of the key fob. Pressing this button will allow you to slide off the back cover.
Next, slide off the back cover:
– With the release button pressed, gently slide the back cover away from the front casing of the key fob. This action exposes the battery compartment.
After accessing the battery compartment, remove the old battery:
– The battery is usually a CR2032 type. Take note of the battery’s orientation, as the positive (+) side should face up when installing the new battery.
Lastly, insert a new battery:
– Place the new CR2032 battery into the compartment, ensuring it matches the original orientation. After securing the battery, slide the back cover back into place until it clicks.
Performing these steps correctly allows for effective battery replacement, ensuring that your key fob continues to operate efficiently. Regular checks of the battery can enhance the longevity of your key fob’s functionality.
What Is the Step-by-Step Process for Removing the Old Battery from Your 2017 Chevy Volt Key Fob?
Replacing the battery in a 2017 Chevy Volt key fob is a straightforward process that allows users to maintain their key fob’s functionality. This component operates using a small battery that powers its remote features, including keyless entry and start.
According to Chevrolet’s official service manual, the key fob battery type for the 2017 Volt is a CR2032 lithium coin battery. This battery is known for its long shelf life and reliability in small electronic devices.
The key fob typically consists of a plastic shell, battery compartment, and electronic circuit board. Users must be careful not to damage any internal components while replacing the battery. Following the correct steps ensures that the key fob continues to function properly.
Further guidance is offered by the Association of Motor Vehicle Administrators (AMVA), which suggests using proper tools and techniques to avoid harm to the device or injury to oneself during the battery replacement.
Factors that can necessitate battery replacement include battery depletion, extreme temperatures, and frequent usage of the fob’s functions. Users may notice decreased response from the fob when a weak battery is present.
Data from the Consumer Electronics Association indicates that lithium coin batteries like the CR2032 have a lifespan of about 2 to 5 years, depending on usage. Regular maintenance can prevent sudden failures.
Neglecting to replace a dead battery can lead to inconvenience, such as being unable to access or start the vehicle. This situation may impact personal mobility and daily routines.
Environmental implications arise if batteries are not disposed of properly, potentially leading to toxic chemical leaks. Economically, replacing a key fob can incur additional costs if users need assistance from dealerships.
Proper disposal includes recycling old batteries at designated collection points, as advised by the Environmental Protection Agency (EPA). Awareness of responsible disposal can protect environmental health.
Specific technologies such as battery level indicators in newer fobs can help mitigate these issues by alerting users to low battery levels before they fail completely. Regular checks and timely replacements can enhance user experience.
-output
Which Battery Type Should You Choose to Replace the Old One in Your 2017 Chevy Volt Key Fob?
To replace the old battery in your 2017 Chevy Volt key fob, choose a CR2032 battery.
The following key aspects are important:
1. Battery type: CR2032
2. Battery features: Lithium, 3V
3. Lifespan: Approximately 3-5 years
4. Accessibility of replacement: Easy to replace
5. Cost: Generally inexpensive
Transitioning to the detailed explanation, we will now explore each point regarding the best battery choices and their attributes.
-
Battery Type: CR2032:
The battery type recommended for replacing the key fob in your 2017 Chevy Volt is a CR2032. This designation indicates the size and voltage of the battery. The “CR” stands for lithium chemistry, while “2032” denotes a diameter of 20mm and a thickness of 3.2mm. This compatibility ensures reliable performance for the key fob, which operates various keyless entry features. -
Battery Features: Lithium, 3V:
The CR2032 battery is a lithium type that provides a nominal voltage of 3 volts. Lithium batteries offer a high energy density and stable voltage output, which are essential for the key fob’s electronic functionalities. They are preferred over other battery types for such applications due to their longevity and reliability. -
Lifespan: Approximately 3-5 Years:
Typically, CR2032 batteries have a lifespan of about 3 to 5 years when used in a key fob. Factors affecting lifespan include usage frequency and environmental conditions. For instance, constant use may deplete the battery faster than occasional use, highlighting the importance of monitoring battery performance. -
Accessibility of Replacement: Easy to Replace:
Replacing the CR2032 battery in your key fob is straightforward. Most key fobs are designed to be opened without specialized tools. A coin or flathead screwdriver can be used to pry open the casing, allowing for quick and easy battery replacement, making it user-friendly. -
Cost: Generally Inexpensive:
The cost of a CR2032 battery is relatively low, typically ranging from $2 to $5, depending on the brand and retailer. This affordability makes it a cost-effective option for key fob replacements. Various retailers often carry them, including drugstores, electronic shops, and online platforms.
Following these guidelines will help ensure your 2017 Chevy Volt key fob continues to function effectively.
How Do You Properly Install the New Battery in Your 2017 Chevy Volt Key Fob?
To properly install the new battery in your 2017 Chevy Volt key fob, you need to carefully open the key fob, replace the old battery with a new one, and reassemble the fob securely.
- Open the key fob: Use a flat, thin tool, such as a screwdriver, to gently pry open the key fob. Locate the seam between the two halves and insert the tool carefully to avoid damaging the casing.
- Remove the old battery: Take out the old battery using your fingers or tweezers. Make sure to note the orientation of the battery, specifically the positive (+) and negative (-) sides.
- Install the new battery: Obtain a replacement battery that matches the specifications of the old one. The 2017 Chevy Volt key fob typically uses a CR2032 battery. Insert the new battery into the fob, ensuring the same orientation as the old battery.
- Reassemble the key fob: Align the two halves of the fob and press them together until you hear a click, ensuring a secure fit.
- Test the key fob: After reassembly, test the key fob by pressing any button to confirm that the battery installation was successful.
Following this process ensures that your key fob will function correctly, providing reliable access to your vehicle.
What Steps Should You Follow to Securely Close the 2017 Chevy Volt Key Fob After Battery Replacement?
To securely close the 2017 Chevy Volt key fob after battery replacement, follow these specific steps.
- Align the key fob halves.
- Ensure the battery is seated correctly.
- Snap the fob halves together firmly.
- Test the key fob buttons.
- Verify the key fob’s functionality with the vehicle.
After considering these steps, it’s essential to understand each step’s purpose in ensuring your key fob closes securely.
-
Align the Key Fob Halves: To start, ensure the two halves of the key fob are aligned properly. Misalignment can prevent the fob from closing securely and may risk exposing the battery.
-
Ensure the Battery is Seated Correctly: Confirm that the new battery is placed correctly in its slot. Improper placement can lead to poor contact and ultimately render the key fob non-functional.
-
Snap the Fob Halves Together Firmly: When closing the fob, apply pressure evenly to snap the halves together. This action ensures that all internal components are secured, including the battery.
-
Test the Key Fob Buttons: Once the fob is closed, test each button to ensure they operate correctly. This step confirms that the battery connection is effective and that the key fob can communicate with your vehicle.
-
Verify the Key Fob’s Functionality with the Vehicle: Finally, approach your Chevy Volt and check if the key fob can lock and unlock the doors. This verification ensures that all steps were performed correctly and the fob is secure.
Following these steps will help maintain the integrity and function of your Chevy Volt key fob after battery replacement.
How Can You Test Your New Key Fob Battery to Confirm Its Functionality?
You can test your new key fob battery by performing a series of simple checks to ensure it works properly. These checks can confirm the functionality of the battery and the key fob itself.
Start by checking the LED light on the key fob. If the fob includes a key or unlock button, press it and observe the light. If the LED illuminates brightly, the battery is likely functional. If it does not light up or appears dim, the battery may need to be replaced.
Next, test the range of your key fob. Stand at a distance of about 10-15 feet from your vehicle and press the lock or unlock button. If the vehicle responds as expected, the battery is functioning well. If you need to be very close for the key fob to work, the battery may be weak.
Additionally, try using the key fob to access all functionalities. Use buttons such as panic, trunk release, or remote start if available. If all functionalities operate smoothly, it indicates a good battery. If certain features do not respond, it may signal a battery issue or a malfunction in other parts of the key fob.
If you have access to a voltmeter, measure the battery voltage directly. A functional key fob battery typically registers between 3.0–3.3 volts. If the voltage drops below 3.0 volts, consider replacing the battery.
Perform these tests systematically. For a more thorough understanding of battery health, consult the user manual for specific guidelines related to your vehicle’s key fob. These methods will help confirm whether your new key fob battery is working effectively.
Related Post: