Replace Battery In Asus X200M: Easy Guide For Disassembly And Repair [Updated On- 2025]

To replace the Asus X200M battery, start by removing the two rubber caps on the back. Use a Phillips #0 screwdriver to unscrew the 14 mm screws underneath. Carefully lift out the old battery and insert a new A31N1302 internal battery (11.25V, 2200mAh). For more help, watch a detailed video tutorial.

Next, turn the Asus X200M upside down. Locate the screws securing the back cover. Carefully remove these screws and set them aside in a safe location. Use the plastic pry tool to gently lift the back cover off, exposing the internal components. Identify the battery, typically located at the center of the device, connected by a small cable.

Disconnect the battery by unscrewing its connector and gently pulling it away from the motherboard. Replace the old battery with a new one by following the reverse steps. Ensure all connections are secure before reattaching the back cover.

After successfully replacing the battery, the next step involves reassembling the device. This process will ensure your Asus X200M is ready to perform efficiently again. In the following section, we will discuss tips for proper reassembly and verification of functionality.

# Table of Contents

What Is the Asus X200M and Why Might You Need to Replace Its Battery?

The Asus X200M is a compact laptop that features a lightweight design and decent performance for everyday tasks. It is designed for users who need portability and affordability. If the battery life of the Asus X200M significantly decreases, replacing the battery may become necessary to restore usability.

According to Asus, a leading technology company, batteries in laptops can degrade over time due to regular charging cycles. This degradation affects performance and can lead to device shutdowns and reduced functionality.

The battery in laptops like the Asus X200M typically operates under specific conditions that affect its lifespan. High usage, constant charging without discharging, and exposure to extreme temperatures can accelerate battery wear. The mail performance may decline depending on the user’s habits and the environment.

Battery degradation often results from simple wear and tear. The Consumer Electronics Association states that lithium-ion batteries, commonly used in laptops, generally last around 2-3 years before showing noticeable deterioration.

A 2020 study by Battery University found that approximately 30% of laptop users experience battery failure within three years of purchase. This statistic highlights the need for users to monitor their battery health regularly.

The consequences of a failing battery include diminished productivity and possible data loss. Users may find themselves unable to work on the go, negatively impacting both personal and professional commitments.

Addressing battery issues involves regular maintenance, such as avoiding overcharging and keeping the device cool. Organizations like the EPA recommend recycling old batteries responsibly to minimize environmental impacts.

To mitigate battery problems, users should employ practices like calibrating the battery, using power-saving modes, and replacing the battery when necessary. Implementing smart use can prolong battery life and usability.

How Can You Tell if the Battery in Your Asus X200M Is Failing?

You can tell if the battery in your Asus X200M is failing by observing performance issues, physical damage, and changes in charge time or capacity. These indicators help identify battery problems effectively.

Performance issues: If your laptop frequently shuts down unexpectedly or does not hold a charge, it indicates potential battery failure. A healthy battery should provide consistent performance without sudden drops in power.

Physical damage: Inspecting the battery for any swelling, leakage, or unusual heat can signal a failing battery. If the battery case appears bulged or deformed, it should be replaced immediately, as it can present safety hazards.

Changes in charge time: If your laptop takes significantly longer to charge than before, this may indicate a degraded battery. A functioning battery should charge within a reasonable time frame, typically between 2 to 4 hours depending on the laptop’s usage.

Changes in capacity: Monitor how quickly the battery drains during use. If it drains rapidly under normal tasks, it may mean the battery can no longer hold sufficient charge. Regular users should expect a fully charged battery to last several hours for productivity tasks.

Regular checks of these signs can help maintain the functionality of your Asus X200M and ensure a smoother user experience.

What Tools Are Necessary for Replacing the Battery in Your Asus X200M?

To replace the battery in your Asus X200M, you will need specific tools for the task.

The necessary tools for this process include:
1. Phillips head screwdriver
2. Plastic spudger or pry tool
3. ESD strap (Electrostatic Discharge strap)
4. Tweezers
5. Replacement battery

Having identified these tools, it’s important to understand how each contributes to the battery replacement process.

Phillips Head Screwdriver: The Phillips head screwdriver is vital for removing the screws that secure the back cover of the Asus X200M. This tool ensures that you can safely access the internal components without damaging them.
Plastic Spudger or Pry Tool: The plastic spudger or pry tool is used to carefully detach the back cover from the laptop chassis. This tool prevents damage to the plastic casing and reduces the risk of scratches while prying open the device.
ESD Strap: An ESD strap protects electronic components from static electricity. By wearing this strap during the replacement process, you minimize the risk of damaging sensitive parts of the laptop with static shock.
Tweezers: Tweezers assist in manipulating small components and connectors within the laptop. They are especially useful for handling battery connectors that may be difficult to reach.
Replacement Battery: Obtaining a suitable replacement battery is crucial. Ensure that the battery is compatible with the Asus X200M model. Using the correct battery model guarantees that your device will operate efficiently and safely.

By gathering these tools, you will simplify the battery replacement process and ensure a smoother experience.

How Do You Safely Disassemble Your Asus X200M for Battery Replacement?

To safely disassemble your Asus X200M for battery replacement, follow these steps: gather necessary tools, power off the device, remove the back cover, disconnect the battery, and replace it with a new one.

Firstly, you will need the right tools for the process. Use a small Phillips-head screwdriver, a plastic opening tool, and an anti-static wrist strap. These tools ensure you can open the device without damaging any internal components.

Next, power off your Asus X200M completely. This step is crucial to avoid damaging the device or injuring yourself during the disassembly. Once powered off, remove all connected peripherals.

Then, proceed to remove the back cover. Use the plastic opening tool to gently pry open the back panel. Exercise caution to avoid breaking any clips or damaging the plastic casing. Identify and remove the screws securing the back cover and set them aside in a safe location.

After that, you need to disconnect the battery. Locate the battery connector, which typically sits near the center of the device. Carefully lift the connector from the motherboard using the plastic opening tool.

Finally, replace the existing battery with a new one. Align the new battery with the connectors and press it into place. Reconnect the battery to the motherboard. Once done, reattach the back cover by sliding it back into place and securing it with screws.

By following these steps, you can safely replace the battery of your Asus X200M, ensuring the device continues to function optimally.

What Steps Are Involved in Removing the Back Cover of Your Asus X200M?

Removing the back cover of your Asus X200M requires a systematic approach to avoid damaging the device. Follow these steps carefully to achieve this safely.

Power off the device completely.
Disconnect all power sources, including the charger.
Remove any external peripherals.
Gather necessary tools, such as a small Phillips screwdriver and a plastic prying tool.
Flip the laptop upside down.
Unscrew all screws that secure the back cover.
Use the plastic prying tool to gently separate the back cover from the base.
Lift the back cover off the device carefully.

Understanding these steps can help ensure a smooth disassembly process. Now, let’s explore each step in detail to provide greater clarity and guidance.

Power Off the Device:
Powering off the device is crucial. Always turn off your laptop before attempting any hardware modifications. This step reduces the risk of electrical shorts and protects internal components from potential damage.
Disconnect All Power Sources:
Disconnecting the charger and any other attached devices is essential. This eliminates any remaining power flow to the laptop, ensuring complete safety during the disassembly.
Remove External Peripherals:
External peripherals include devices such as USB drives, mice, or keyboards. Removing these items clears the workspace and prevents unintentional damage to them during the process.
Gather Necessary Tools:
Having the right tools is vital. A small Phillips screwdriver will allow you to remove screws, while a plastic prying tool protects the device from scratches and damage. It’s important to use non-metal tools when prying open the casing to avoid puncturing internal components.
Flip the Laptop Upside Down:
Positioning the laptop upside down is necessary for accessing the screws and the back cover. Ensure the surface is clean to prevent dirt from entering the device.
Unscrew All Screws That Secure the Back Cover:
Locate and unscrew all screws from the back cover using the Phillips screwdriver. Keep the screws organized for easy reassembly. Failing to remove all screws could result in a difficulty when trying to lift off the cover.
Use the Plastic Prying Tool:
Insert the plastic prying tool into the seam between the back cover and the base. Gently work around the edge to loosen the cover. Be careful not to apply excessive force, as this can lead to cracks or breakage.
Lift the Back Cover Off:
Once the cover is sufficiently loosened, gently lift it off the device. Move slowly to avoid damaging any internal connections. Setting the cover aside on a soft surface minimizes the risk of scratches.

Following these steps will help you safely and effectively remove the back cover of your Asus X200M.

How Do You Disconnect the Old Battery from the Asus X200M?

To disconnect the old battery from the Asus X200M, follow these steps: turn off the laptop, remove the back cover, disconnect the battery cable, and take out the old battery.

Turn off the laptop: Always shut down the device before beginning any disassembly. This protects both you and the laptop from electrical damage.
Remove the back cover: Use a screwdriver to unscrew the back panel. Gently lift it off, taking care not to damage any clips. This provides access to the internal components, including the battery.
Locate the battery cable: Once the back cover is off, identify the battery cable. It is a thin wire that connects the battery to the motherboard.
Disconnect the battery cable: Carefully pull the connector away from the motherboard. Do this by grasping the plastic connector and pulling gently, avoiding any tugging on the wires which could cause damage.
Remove the old battery: Depending on the model, the battery may be secured by screws or adhesive. If there are screws, remove them. Lift the battery out gently without causing any damage to surrounding components.

By following these steps carefully, you can safely disconnect the old battery from the Asus X200M.

What Steps Should You Follow to Install the New Battery in Your Asus X200M?

To install the new battery in your Asus X200M, you should follow a series of organized steps.

Gather the necessary tools: screwdriver set, prying tool, and new battery.
Power off the device completely and disconnect it from power.
Remove the back cover using a prying tool or screwdriver.
Disconnect the old battery carefully.
Insert the new battery into the slot.
Secure the back cover properly.
Power on the device to ensure proper function.

Transitioning from the steps, it’s essential to highlight key considerations and possible viewpoints on battery installation.

Key Considerations:
1. Safety precautions.
2. Compatibility of the battery.
3. Warranty implications.
4. Tools selection.
5. Professional assistance options.

Battery Installation Safety Precautions:
Battery installation safety precautions emphasize the importance of handling equipment carefully. These measures include wearing anti-static wrist straps to prevent electrostatic discharge (ESD) and ensuring the device is completely powered off. According to the Consumer Product Safety Commission (CPSC), improper handling of batteries can lead to safety hazards such as short-circuiting or even fires.

Battery Compatibility Importance:
Battery compatibility importance refers to using a battery specifically designed for the Asus X200M. Using incompatible components can result in device malfunction or damage. Always check the battery model number before purchase. A study by Battery University (2021) suggests that using the correct battery can extend the lifespan of your device.

Warranty Implications of DIY Repairs:
Warranty implications of DIY repairs highlight that opening your device may void the manufacturer’s warranty. Asus often has specific policies regarding self-service. Always review your warranty terms before beginning any replacement procedure to ensure you don’t inadvertently lose coverage.

Choosing the Right Tools:
Choosing the right tools remains critical for a successful battery replacement. Using the proper screwdrivers and prying tools reduces the risk of damaging internal components. A survey conducted by iFixit (2022) indicates that using the precise tools can result in a more efficient repair process and better outcomes.

Professional Assistance Options:
Professional assistance options suggest that if you are unsure or uncomfortable with the replacement, seeking help from a certified technician may be the best choice. Professional help can ensure the job is done correctly and may save time and resources in the long run.

By considering these points, you can ensure a smooth and successful battery replacement in your Asus X200M.

What Tips Can Help You Properly Reassemble Your Asus X200M After Battery Replacement?

To properly reassemble your Asus X200M after a battery replacement, follow these essential tips to ensure an effective process.

Organize tools and components.
Follow a step-by-step guide.
Handle components carefully to avoid damage.
Check for screws and connections.
Test the functionality before final assembly.

These steps create a structured approach to ensure the successful reassembly of your device, enhancing efficiency and reducing errors.

Organize Tools and Components: Organizing your tools and components is crucial. This step ensures that everything you need is readily available during reassembly. It prevents confusion and mistakes. Keeping screws and small parts in labeled containers helps avoid losing them.
Follow a Step-by-Step Guide: Following a step-by-step guide significantly aids in reassembly. You can use written instructions, videos, or diagrams specific to the Asus X200M. Guides provide a clear roadmap for each task, making it easier to reassemble the device correctly.
Handle Components Carefully to Avoid Damage: Handling components with care is essential. Laptop components can be delicate and susceptible to damage. Avoid touching circuitry with bare hands to prevent static discharge, which can harm the motherboard and other sensitive parts.
Check for Screws and Connections: Checking all screws and connections is vital. Ensuring that every component is securely fastened prevents future problems, such as loose screws or connectivity issues. It may be helpful to double-check that all connections match the order in which they were removed.
Test Functionality Before Final Assembly: Testing functionality before the final assembly is a best practice. Once the battery is replaced, power on the laptop to verify that it operates correctly. This step allows you to address any issues before sealing it up, minimizing the need for disassembly later.

By following these detailed recommendations, you enhance the likelihood of a seamless reassembly and ensure your Asus X200M functions optimally after the battery replacement.

How Can You Dispose of the Old Battery from Your Asus X200M Responsibly?

You can dispose of the old battery from your Asus X200M responsibly by recycling it at designated collection points or through mail-in programs.

Recycling batteries helps reduce environmental pollution and conserves valuable resources. Here are the key steps to ensure responsible disposal:

Identify Local Recycling Options: Look for local recycling centers that accept lithium-ion batteries. Many electronics retailers and community centers offer drop-off locations for battery recycling. According to the Environmental Protection Agency (EPA), recycling helps prevent hazardous materials from entering landfills (EPA, 2020).
Use Mail-in Recycling Programs: Some organizations provide mail-in recycling services. You can order a prepaid shipping box to send your old battery to a facility equipped to handle battery waste. This option offers convenience and ensures safe processing.
Follow Safety Guidelines: When transporting your battery, try to keep its terminals covered with tape to prevent short-circuiting. Store the battery in a cool, dry place until you are ready to recycle it. Mishandling Lithium-ion batteries can lead to fires or leaks.
Check Local Regulations: Some regions have specific laws regarding battery disposal. Verify with local authorities about the regulations that apply in your area. Following these rules helps maintain community safety and environmental health.
Educate Others: Share information about responsible battery disposal with friends and family. Raising awareness helps promote better practices and reduces unsafe disposal methods.

By taking these actions, you can ensure that your old Asus X200M battery is disposed of in an environmentally friendly manner.

Related Post: