The 2015 GMC Yukon remote uses a CR2032 battery. This keyless entry battery weighs 0.0285 KG. The number of batteries needed may vary. Follow the installation notes for proper setup. The part number is 12538938. Replace with a new battery to ensure the remote works well.
To open the remote, use the flathead screwdriver to gently pry apart the two halves of the casing. Be careful not to damage the plastic. Once opened, take out the old battery, noting its orientation. Insert the new CR2032 battery with the positive side facing up. Lastly, snap the two halves of the remote back together securely.
Using a CR2032 battery is straightforward. These batteries provide a reliable power source and have a long shelf life. Ensure to test your remote after replacing the battery. The buttons should function properly, allowing you to lock and unlock your Yukon with ease.
Next, we will discuss the signs of a failing battery and tips for maintaining your Yukon remote. Understanding these aspects can extend the battery’s life and enhance your overall experience with your vehicle’s key fob.
What Size Battery Does the 2015 Yukon Remote Require?
The 2015 Yukon remote requires a CR2032 battery.
- Types of batteries for the 2015 Yukon remote:
– CR2032 battery
– Alternatives like CR2025 battery (less common)
– Rechargeable options (if applicable)
There are varied opinions about which battery type best suits the remote. Some users prefer non-rechargeable batteries, considering them more reliable. Others advocate for rechargeable batteries, citing environmental benefits.
- CR2032 Battery:
The CR2032 battery is a coin-cell battery commonly used in many remote controls, including the 2015 Yukon remote. It typically has a diameter of 20 mm and a thickness of 3.2 mm. This battery type is widely available and offers a nominal voltage of 3 volts. Users appreciate the longevity of CR2032 batteries, which can last several years in low-power devices.
The Consumer Electronics Association notes that CR2032 batteries have a low self-discharge rate, maintaining their charge for extended periods. In a 2019 review, experts found that high-quality CR2032 batteries lasted longer than lower-cost alternatives in similar applications.
-
Alternatives like CR2025 Battery:
The CR2025 battery is another type used in some remotes. It is slightly thinner than the CR2032 battery, with a thickness of 2.5 mm. While it may fit in devices designed for CR2032 batteries, users may notice reduced battery life due to its lower capacity. The CR2025 battery typically has a capacity of around 150 mAh compared to the CR2032’s 220 mAh, meaning it will require replacing more frequently. -
Rechargeable Options:
Rechargeable batteries, such as lithium-ion variants, may also be considered. While they offer the convenience of reusability and reduced waste, they may not fit every remote. Many users find that rechargeable batteries retain their charge for shorter periods compared to disposable options. Therefore, the choice largely depends on personal preference and environmental considerations.
How Can You Replace the Battery in a 2015 Yukon Remote?
To replace the battery in a 2015 Yukon remote, you can follow a few simple steps that ensure a smooth process.
- Identify the type of battery: The 2015 Yukon remote typically uses a CR2032 battery.
- Open the remote: Use a small flat-head screwdriver to gently pry open the remote casing along the seam. Be cautious to avoid damaging the plastic.
- Remove the old battery: Take out the old CR2032 battery from its compartment, noting the orientation. The positive (+) side should be facing up.
- Insert the new battery: Place the new CR2032 battery into the compartment in the same orientation as the removed battery.
- Reassemble the remote: Snap the remote casing back together, ensuring it is secure.
Following these steps will successfully replace the battery in your 2015 Yukon remote. A CR2032 battery is widely available and provides long-lasting power for your vehicle’s remote functions.
What Tools Will You Need for Battery Replacement?
To replace a battery, you will need specific tools to ensure the process is safe and effective. These tools typically include a screwdriver, safety gloves, and possibly a battery puller or prying tool.
- Screwdriver
- Safety gloves
- Battery puller
- Prying tool
- Towels or microfiber cloth
The above tools are essential for a battery replacement, but various opinions exist regarding their necessity. Some individuals prefer using minimal tools, while others advocate for using all available options to avoid damage.
-
Screwdriver: A screwdriver is necessary for opening the battery compartment. Most devices require either a Phillips or flathead screwdriver, depending on the screws used.
-
Safety Gloves: Safety gloves protect your hands from potential injuries during battery installation. Some batteries contain hazardous materials, so gloves are advisable.
-
Battery Puller: A battery puller is helpful for safely removing batteries that are tight or stuck. It minimizes the risk of damaging the battery or device.
-
Prying Tool: A prying tool is useful for devices with snap-on covers. It allows you to open the compartment without damaging the casing.
-
Towels or Microfiber Cloth: Towels or microfiber cloths can help clean the area around the battery and remove any corrosion or debris. Maintaining cleanliness can improve battery performance and longevity.
In summary, the tools listed above serve distinct purposes and contribute to a successful battery replacement. Each tool plays a crucial role in ensuring the process is safe and efficient.
Why Is the CR2032 Battery Recommended for the 2015 Yukon Remote?
The CR2032 battery is recommended for the 2015 Yukon remote due to its compact size, reliable performance, and widespread availability. This battery type offers adequate voltage and capacity for the remote’s electronic functions.
According to the International Electrotechnical Commission (IEC), the CR2032 is a standard lithium coin cell battery commonly used in electronic devices. This battery provides a nominal voltage of 3 volts and has a typical capacity of 220 mAh, which is suitable for devices that require low power consumption.
The underlying reasons for using the CR2032 battery in the 2015 Yukon remote include its size, energy efficiency, and performance consistency. The battery’s dimensions of 20 mm in diameter and 3.2 mm in height make it an ideal fit for the compact design of the remote. Additionally, lithium batteries, like the CR2032, have a low self-discharge rate, allowing them to retain their charge over time, which is crucial for devices that may remain unused for extended periods.
Lithium coin cells are defined by their chemical composition, which enhances their energy density and lifespan. Energy density refers to the amount of energy stored in a given volume. CR2032 batteries typically provide a higher energy density than alkaline batteries of similar size, resulting in longer usage times before replacement.
Specific conditions that contribute to the effectiveness of the CR2032 include moderate temperatures and proper handling. For example, extreme temperatures can affect battery performance, leading to reduced lifespan or failure. It is also important to insert the battery according to the polarity markings in the battery compartment to ensure proper functioning. If users frequently press the buttons or use additional features like remote start, this can drain the battery more quickly, highlighting the importance of the CR2032’s capacity to deliver reliable power under varied usage scenarios.
How Does a CR2032 Battery Compare to Other Battery Types for Car Remotes?
The CR2032 battery is a commonly used battery type in car remotes, but it can be compared to several other battery types as well. Below is a comparison of the CR2032 with other battery types typically used in car remotes:
| Battery Type | Voltage (V) | Typical Use | Size (mm) | Capacity (mAh) | Weight (g) |
|---|---|---|---|---|---|
| CR2032 | 3 | Car remotes, watches, calculators | 20 x 3.2 | 220 | 3.0 |
| CR2016 | 3 | Car remotes, small electronics | 20 x 1.6 | 90 | 2.0 |
| CR2450 | 3 | Car remotes, fitness devices | 24 x 5.0 | 600 | 6.5 |
| A23 | 12 | Car alarms, remote controls | 28.5 x 10.0 | 55 | 10.0 |
Each battery type varies in size, voltage, capacity, and application, making them suitable for different devices beyond just car remotes.
How Long Can You Expect a CR2032 Battery to Last in a 2015 Yukon Remote?
A CR2032 battery in a 2015 Yukon remote typically lasts between 3 to 5 years. The average lifespan depends on usage frequency and environmental conditions. Frequent use can decrease battery life, while moderate use generally extends it.
For example, a driver who uses the remote several times daily may experience a shorter lifespan, possibly around 3 years. In contrast, occasional users may see their battery last closer to 5 years. Environmental factors, such as extreme temperatures and humidity, can also affect battery performance and longevity.
Additionally, battery quality plays a role. Name-brand batteries often last longer than generic ones. Newer CR2032 batteries tend to have higher energy retention compared to older stock or those that have been sitting on store shelves for extended periods.
In summary, most CR2032 batteries in a 2015 Yukon remote will last approximately 3 to 5 years, influenced by usage patterns and environmental conditions. For optimal performance, consider the frequency of use and the type of battery chosen.
What Are the Steps for Properly Installing a CR2032 Battery in a 2015 Yukon Remote?
To properly install a CR2032 battery in a 2015 Yukon remote, follow these steps:
- Gather the necessary tools (flathead screwdriver or coin).
- Open the remote.
- Remove the old battery.
- Insert the new CR2032 battery.
- Close the remote securely.
Understanding the battery replacement process is essential. Different remotes might have varying designs and battery placements. However, the procedure for most key fobs remains consistent.
1. Gather Necessary Tools:
Gathering necessary tools is the first step in battery replacement. You will need a small flathead screwdriver or a coin to aid in opening the remote. These tools help to pry open the battery compartment without damaging the remote’s casing.
2. Open the Remote:
Opening the remote involves carefully sliding the flathead screwdriver or coin into the seam of the remote. Apply gentle pressure to pop open the casing. It is important to be cautious during this step to avoid breaking the remote.
3. Remove the Old Battery:
Removing the old battery requires gently prying it out of its slot. Observe the orientation of the battery, noting which side is positive (+) and negative (-) for correct placement of the new battery.
4. Insert the New CR2032 Battery:
Inserting the new CR2032 battery should involve placing it in the same orientation as the original battery. Ensure that the positive side aligns with the corresponding contact in the remote.
5. Close the Remote Securely:
Closing the remote means aligning the two halves of the casing and pressing them together until you hear a click. This confirms that the remote is sealed properly and ready for use.
Following these steps ensures that you replace the battery correctly. Proper maintenance of your remote keeps it functioning effectively.
What Should You Check If Your 2015 Yukon Remote Still Doesn’t Work After Battery Replacement?
If your 2015 Yukon remote still doesn’t work after battery replacement, check for signal interference, inspect for physical damage, and verify remote programming.
- Signal interference
- Physical damage
- Remote programming
- Battery installation position
- Key fob age and condition
To understand these issues better, let’s look into each aspect in detail.
-
Signal Interference: Signal interference occurs when there are obstacles or electronic devices that disrupt the communication between the remote and the vehicle. Common sources include other electronic devices, nearby radios, or even structural elements of buildings. For example, a radio signal may interfere with the remote’s frequency, preventing it from functioning properly.
-
Physical Damage: Physical damage to the remote can inhibit its performance. This can include cracked casing, damaged buttons, or internal component failure. Even minor drops can affect the internal circuitry. If the remote shows signs of wear, it may require inspection or replacement.
-
Remote Programming: Remote programming involves the necessity to sync the remote with the vehicle. If the remote does not function after replacing the battery, it may need reprogramming. Specific steps for programming can vary by vehicle model. Consult the vehicle manual or a dealership for the precise method.
-
Battery Installation Position: Proper battery installation is essential for functionality. If the battery is not positioned correctly, it will not make proper contact with the terminals. Check to ensure that the battery is inserted in the correct direction, and the contacts are clean and free from corrosion.
-
Key Fob Age and Condition: The key fob’s age and general condition can impact its performance. Over time, internal components can wear out or the chip can become damaged. If the remote is very old or has been repaired multiple times, it may be time to replace it entirely.
By exploring these factors, you can better diagnose the issue with your remote and determine the next course of action.
How Can You Maintain the Longevity of Your 2015 Yukon Remote Battery?
To maintain the longevity of your 2015 Yukon remote battery, proper usage and care are crucial. following these practices can significantly prolong the battery’s lifespan.
- Limit usage of remote functions: Frequent use of the remote can drain the battery quickly. Only use the remote when necessary to extend its life.
- Avoid extreme temperatures: High heat and severe cold can negatively affect battery performance. Store the remote in a climate-controlled environment whenever possible.
- Keep the battery compartment clean: Ensure that the battery contacts are free of dirt and corrosion. Clean contacts with a soft, dry cloth to maintain proper conduction.
- Replace the battery periodically: Many experts suggest replacing the CR2032 battery every two to three years, even if it appears to be functioning properly. This proactive approach prevents the inconvenience of a dead remote.
- Store spare batteries correctly: Keep spare batteries in a cool, dry place to avoid damage. Check expiration dates regularly, as old batteries can leak.
By implementing these practices, you can significantly increase the lifespan of your 2015 Yukon remote battery.
Related Post: